
valve adapter guide
Wiser Radiator Thermsotats have a
direct connection to the boiler, enabling
you to control the on/off times and
temperatures of individual rooms via
the app.
· The Wiser Radiator Thermostat is
mounted on standard radiator
valve bodies.
· This is achieved by simply unscrewing
the existing TRV head and replacing
with the Wiser head. Hand tightening
is sufficient, no tools should be used.
· The Wiser Radiator Thermostat
contains multiple sensors for accurate
room temperature measurement.
· Temperature schedules are set on the
Wiser app but you can boost the
schedule (to increase or decrease
temperature) by twisting the top.
· It is powered by 2 x AA batteries
wiser.draytoncontrols.co.uk

Mounting the
Wiser Radiator
Thermostat
• The Wiser Radiator Thermostat is supplied
with 2 valve adapters which cover
95% of TRVs used in the UK
• The most common thermostatic valves
have a M30 x 1.5mm connection.
• Brands include Drayton, Honeywell,
Pegler, Myson, Siemens
• The M30 valve adapter and chrome ring
nut should be used
Valve adapter
Danfoss
adapter
• Less often you may find a Danfoss RA valve.
The Danfoss adapter should be used

Valve type Valve line drawing Thermostat/Valve adapter Code number Identifying marks
Comap/
Westherm
M28 x 1,5
49,5mm
28mm
700 100 007
Danfoss RAVL
59mm
26mm
700 100 003
26mm collar with
4 grooves
Danfoss RAV
59mm
34mm
700 100 008
34mm collar with
4 grooves
Oventrop
M30 x 1,0
58mm
30mm
700 100 002
Herz M28 x 1,5
50mm
27.5mm
700 100 004
TA M28 x 1,5
51mm
27.5mm
700 100 006
Giacomini
Ø 22,6mm
22.6mm
700 100 009
Markaryd
M28 x 1.5mm
57mm
28.5mm
700 100 010
Ondal
38mm
700 100 011
Vaillant
59mm
30.5mm
700 100 001
Mounting the Radiator Thermostat
on alternative valve body type
• For other valves, a different adapter will be needed.
• These are available from sources such
as www.conrad-electronic.co.uk
• The thermostat/valve adapter is attached to the valve and the
M30 adapter and chrome ring nut (provided in the box) are
used to screw the Wiser Radiator Thermostat in place.
ONDAL