Drayton MiStat P710R User Manual
What is a programmable
room thermostat?
... an explanation for householders
A programmable room thermostat is both a
programmer and a room thermostat. A programmer
allows you to set ‘On’ and ‘Off’ time periods to suit
your own lifestyle. A room thermostat works by
sensing the air temperature, switching on the heating
when the air temperature falls below the thermostat
setting, and switching it off once this set temperature
has been reached.
So, a programmable room thermostat lets you choose
what times you want the heating to be on, and what
temperature it should reach while it is on. It will allow
you to select different temperatures in your home at
different times of the day (and days of the week) to
meet your particular needs.
Turning a programmable room thermostat to a higher
setting will not make the room heat up any faster. How
quickly the room heats up depends on the design of
the heating system, for example, the size of boiler and
radiators. Neither does the setting affect how quickly
the room cools down.
HOMEOWNER Guide
Drayton
MiStatTM Programmable
Room Thermostat
Model: P710R
Invensys
Customer Service Tel: 0845 130 5522
Customer Service Fax: 0845 130 0622
Technical Helpline: 0845 130 7722
Website: www.draytoncontrols.co.uk
E-mail: customer.care@invensys.com
l
@DraytonControls
x
/DraytonControls
EU Design Regs:- 002180638-1/2/3
User Guide 06490190001 Iss E
MiStat
MiStat
HOMEOWNER Guide
MiStat
What is a programmable
room thermostat?
... an explanation for householders
A programmable room thermostat is both a
programmer and a room thermostat. A programmer
allows you to set ‘On’ and ‘Off’ time periods to suit
your own lifestyle. A room thermostat works by
sensing the air temperature, switching on the heating
when the air temperature falls below the thermostat
setting, and switching it off once this set temperature
has been reached.
So, a programmable room thermostat lets you choose
what times you want the heating to be on, and what
temperature it should reach while it is on. It will allow
you to select different temperatures in your home at
different times of the day (and days of the week) to
meet your particular needs.
Turning a programmable room thermostat to a higher
setting will not make the room heat up any faster. How
quickly the room heats up depends on the design of
the heating system, for example, the size of boiler and
radiators. Neither does the setting affect how quickly
the room cools down.
HOMEOWNER Guide
MiStat
Step 3: Powersave
Step 6: Period Settings
Zone = Heating
Day range & period
Stored programmes
MiStat P contains 3 pre-set programmes, as shown
below. These programs can be modifi ed according to
personal needs and can be stored by using a name. Via
this name they can also be re-loaded.
Once a programme has been modifi ed, the original
Step 1: Keys and Display / Zone Summary
MiStat
Home key: Press
to go back to the
home screen at
any time and to
toggle between
zone summary &
home screens
Arrow keys: Press to
move the highlight on
screen, and to change
fi eld values
RF Pack: MiStat P710R
Select key: Press to select highlighted
options, and to open and save editor screens
This icon used
throughout these
instructions refers
to this button
Call for heat indication. This fl ame will be visible when
the room temperature is below the set temperature
This screen will show 2 Minutes after the last key
press, if “no display” is selected (see Installer
Settings), the screen will be blank.
Turning a programmable room thermostat to a lower
setting will result in the room being controlled at a
lower temperature, and saves energy. The way to
set and use your programmable room thermostat
is to fi nd the lowest temperature settings that you
are comfortable with at the different times you have
chosen, and then leave it alone to do its job.
The best way to do this is to set low temperatures fi rst,
say 18°C, and then turn them up by one degree each
day until you are comfortable with the temperatures.
You won’t have to adjust the thermostat further. Any
adjustments above these settings will waste energy
and cost you more money.
If your heating system is a boiler with radiators,
there will usually be only one programmable room
thermostat to control the whole house. But you can
have different temperatures in individual rooms
by installing thermostatic radiator valves (TRVs) on
individual radiators.
If you don’t have TRVs, you should choose a
temperature that is reasonable for the whole house.
If you do have TRVs, you can choose a slightly higher
setting to make sure that even the coldest room is
comfortable, then prevent any overheating in other
rooms by adjusting the TRVs.
The time on the programmer must be correct. Some
types have to be adjusted in spring and autumn at the
changes bet ween Greenwich Mean Time and British
Summer Time.
You may be able to temporarily adjust the heating
programme, for example, ‘Override’, ‘Advance’ or
‘Boost’. These are explained in the manufacturer’s
instructions.
Back key: Press
to return to the
previous screen
Current room
temperature
Call for heat indication. This
fl ame will be visible when the
room temperature is below
the set temperature
Date
MiStat
1st event 6:30am 20.0
o
C 6:30am 20.0
o
C 7:00am 20.0
o
C
2nd event 8:30am 16.0
o
C 8:30am 16.0
o
C 9:00am 18.0
o
C
3rd event 4:30pm 21.0
o
C 4:30pm 21.0
o
C 4:00pm 21.0
o
C
4th event
10:30pm
7.0
o
C
10:30pm
7.0
o
C
11:00pm
7.0
o
C
All week Week & Weekend or
Individual Days
Mon-Sun Mon-Fri Sat-Sun
Time Temp Time Temp Time Temp
1st event
6:30am 20.0
o
C 6:30am 20.0
o
C 7:00am 20.0
o
C
2nd event
8:30am 16.0
o
C 8:30am 16.0
o
C 9:00am 18.0
o
C
3rd event
12:00pm 21.0
o
C 12:00pm 21.0
o
C 12.00pm 21.0
o
C
4th event
2.00pm 16.0
o
C
2.00pm
16.0
o
C 2.00pm 18.0
o
C
5th event
4:30pm 21.0
o
C
4:30pm
21.0
o
C 4.00pm 21.0
o
C
6th event
10:30pm
7.0
o
C
10:30pm
7.0
o
C
11.00pm
7.0
o
C
All week Week & Weekend or
Individual Days
Mon-Sun Mon-Fri Sat-Sun
Time Temp Time Temp Time Temp
1st event
6:30am 21.0
o
C 6:30am 21.0
o
C 7:00am 20.0
o
C
2nd event
10:30pm 7.0
o
C 10:30pm 7.0
o
C 9:00am 18.0
o
C
3rd event
4:00pm 21.0
o
C
4th event
11:00pm 7.0
o
C
All week Week & Weekend or
Individual Days
Mon-Sun Mon-Fri Sat-Sun
Time Temp Time Temp Time Temp
: Short fl ashes = RF transmission
Continuous fl ashing = RF signal
issue
: Indicates a Service warning.
: Indicates that holiday
is enabled
: Low battery warning; see
Step 8.
Time
Step 6: Period Settings
Day range & period
Stored programmes
MiStat P contains 3 pre-set programmes, as shown
below. These programs can be modifi ed according to
personal needs and can be stored by using a name. Via
this name they can also be re-loaded.
Once a programme has been modifi ed, the original
Step 1: Keys and Display / Zone Summary
MiStat
Home key: Press
to go back to the
home screen at
any time and to
toggle between
zone summary &
home screens
Current set temperature
& duration, e.g. heating
is programmed to be
21.0°C until 12:00 am
Arrow keys: Press to
move the highlight on
screen, and to change
fi eld values
RF Pack: MiStat P710R
Select key: Press to select highlighted
options, and to open and save editor screens
This icon used
throughout these
instructions refers
to this button
Back key: Press
to return to the
previous screen
Current room
temperature
Call for heat indication. This
fl ame will be visible when the
room temperature is below
the set temperature
+ & - keys:
Press to change
the current
temperature
until the next
programme
event
Select timer
function.
See Step 4.
Help text: To
prompt for
next action. It
relates to the
highlighted line.
Date
Current mode
= Auto Options:
see table in
step 2.
MiStat
1st event 6:30am 20.0
o
C 6:30am 20.0
o
C 7:00am 20.0
o
C
2nd event 8:30am 16.0
o
C 8:30am 16.0
o
C 9:00am 18.0
o
C
3rd event 4:30pm 21.0
o
C 4:30pm 21.0
o
C 4:00pm 21.0
o
C
4th event
10:30pm
7.0
o
C
10:30pm
7.0
o
C
11:00pm
7.0
o
C
All week Week & Weekend or
Individual Days
Mon-Sun Mon-Fri Sat-Sun
Time Temp Time Temp Time Temp
1st event
6:30am 20.0
o
C 6:30am 20.0
o
C 7:00am 20.0
o
C
2nd event
8:30am 16.0
o
C 8:30am 16.0
o
C 9:00am 18.0
o
C
3rd event
12:00pm 21.0
o
C 12:00pm 21.0
o
C 12.00pm 21.0
o
C
4th event
2.00pm 16.0
o
C
2.00pm
16.0
o
C 2.00pm 18.0
o
C
5th event
4:30pm 21.0
o
C
4:30pm
21.0
o
C 4.00pm 21.0
o
C
6th event
10:30pm
7.0
o
C
10:30pm
7.0
o
C
11.00pm
7.0
o
C
All week Week & Weekend or
Individual Days
Mon-Sun Mon-Fri Sat-Sun
Time Temp Time Temp Time Temp
1st event
6:30am 21.0
o
C 6:30am 21.0
o
C 7:00am 20.0
o
C
2nd event
10:30pm 7.0
o
C 10:30pm 7.0
o
C 9:00am 18.0
o
C
3rd event
4:00pm 21.0
o
C
4th event
11:00pm 7.0
o
C
All week Week & Weekend or
Individual Days
Mon-Sun Mon-Fri Sat-Sun
Time Temp Time Temp Time Temp
: Short fl ashes = RF transmission
Continuous fl ashing = RF signal
issue
: Indicates a Service warning.
: Indicates that holiday
is enabled
: Low battery warning; see
Step 8.
Time
Loading...