DrayTek VigorAP 810 User Manual

VigorAP 810

802.11n Access Point

Business-class IEEE 802.11n WLAN access point
Supports 802.3af Power over Ethernet (PoE-PD)
Wi-Fi multimedia (WMM) quality of service features
Comprehensive and trusted security
Supports 4 SSIDs
Multiple operation modes: access point, wireless client, wireless distribution
system (WDS) with access point, WDS/bridge (No AP broadcasting)
Supports basic Vigor routers' AP Management

With a stable and extendable wireless network, both business and
home/SOHO users can easily utilize and enjoy high-bandwidth
applications, such as ERP/CRM, VoIP, video on demand, e-learning
(e.g. iTune U), and so much more. The VigorAP 810 is a wireless
Access Point (AP) with MIMO technology and Power over Ethernet
(PoE) support. That means you can have most advance wireless
network standard for the coverage backward compatible with

802.11b/g standard. Moreover, you would have easy AP
installation no matter where the power plug is. At last but not least,
VigorAP 810 delivers reliable and secure wireless local area
networks (WLANs) through the simplified but robust management
and configuration. See below for more feature details.

Supports basic Vigor routers' AP Management

We already implemented the AP Management (APM) on some
Vigor routers with 3-step installation to let you easily deploy WLAN
for your office network. With the unified user interface of Vigor
routers, the status of VigorAP 810 is clear at the first sight.

PoE for easy installation

Power over Ethernet (PoE) support eases the installation by running
only one cable to VigorAP 810 to deliver both data and power. You
can mount VigorAP 810 to the place which is best for extending
coverage without considering if there is ready access to a power
plug. Of course, you can also use the included AC adapter if power
is available nearby.

Many mobile networks deployed at corporate offices, hotels,
shopping malls or restaurants can take advantage of this technology
to support several applications such as public Internet access and
inventory management. For example, guests of a company could be
given wireless access for the Internet, but they are excluded from any
access to the internal data server. For home users, they can set up
different authorization for SSIDs to their K12 kids, young adults and
parents to avoiding inappropriate contents accessed by underage
family members.

Comprehensive WLAN security control

You can obtain the MAC addresses of each wireless client from its
configuration utility or operating system. You then enter these
addresses into a configuration page of VigorAP 810. When MAC
address filtering is activated, VigorAP 810 performs additional check
for wireless clients to prevent network breaking. Clients within the
authenticated list will be able to join with the WLAN. Those who are
not on the list will be denied while VigorAP 810 receives their
request to join the WLAN.
With industry level security standards for wireless user authentication
and data encryption, 802.11i (WPA2) offers strengthened and
interoperable wireless networking security. The activation of 802.1x
RADIUS (Remote Authentication Dial-in User Service) allows you
centrally manage and store user names and passwords. You can
ensure that only legitimate clients can be associated with corporate
RADIUS servers.

WMM for Wi-Fi application prioritization

DrayTek implements intelligent wireless prioritization technology on
VigorAP 810 for best utilization of wireless coverage. VigorAP 810
supports Wi-Fi Multi Media standard (WMM). It is a standard
created to define Quality of Service (QoS) in Wi-Fi networks. It is a
precursor to the upcoming IEEE 802.11e WLAN QoS draft
standard, which is meant to improve audio, video and voice
applications transmitted over Wi-Fi. WMM adds prioritized
capabilities to Wi-Fi networks and optimizes their performance when
multiple concurring applications, each with different latency and
throughput requirements, compete for network resources.

SSID + 2 VLAN groups for workplace security &
parental control

The VigorAP 800 supports 4 separate SSIDs and two virtual LANs
(VLANs). You can set certain SSID(s) accessing Internet through
either VLAN A or B (LAN_A or LAN_B in WUI). As a result, the
VigorAP 810 divides itself into several virtual access points all within
a single hardware platform.

WDS for unlimited coverage extendibility

The VigorAP 810 can extend over large areas (alike shopping mall)
by its "WDS" (wireless distribution system). WDS takes care of the
establishment of WLAN network with "point-to-point" and "point-to­multipoint" bridging and repeater modes. The repeater mode
provides extend wireless access to additional clients where there is a
relay AP repeats signal from a base AP to distant clients. The bridge­to-bridge mode allows two wired networks to be connected across
some distance. The detachable antenna will let you replace with
DrayTek antennas for directional signal shaping or mounting
flexibility.

Embedded USB printer server

You can connect a printer to the USB port of VigorAP 810 for users
from wired PC or wireless network. i.e. The laptop users can access
printer for printing. When you are using a pair of VigorAP 810s to
make a bridge, the said printer can be installed elsewhere in your
office/ home.

VigorAP 810

Wireless AP

IEEE802.11b/g/n Compliant
Mode:
AP Mode
Station Infrastructure
AP Bridge Point to Point
AP Bridge Point to Multipoint
AP Bridge WDS (Wireless Distribution System)
Universal Repeater
Wireless Client List
64/128-bit WEP/WPA/WPA2
Multiple SSIDs
Hidden SSID
WPS
WMM
MAC Address Control
Wireless Isolation
Internal RADIUS Server (Up to 96 Accounts)
MAC Clone

802.1x Authentication
Internal RADIUS Server Support PEAP
RADIUS Proxy Support TLS & PEAP
DHCP Server & Client
VLAN Grouping and SSID Mapping for LAN A & B
Management VLAN for LAN A & B
Limited Wireless Clients (Up to 64 Clients)
Bandwidth Management for Multiple SSIDs

USB

Printer Server

Network Management

Web-based User Interface (HTTP/HTTPS)
CLI (Command Line Interface, Telnet)
Configuration Backup/Restore
Firmware Upgrade via HTTP/HTTPS/TR-069
Syslog
TR-069 (Compliant with VigorACS SI)
AP Management (with Vigor Series Routers)
Auto Provision
AP Status and Traffic Graph

Hardware Interface

5 x 10/100 Base-TX LAN Switch, RJ-45
(1 x PoE Port on LAN-A1 Port)
1 x USB 2.0 Host
2 x Detached Antennas
1 x Factory Reset Button
1 x Wireless ON / OFF / WPS Button
1 x Power ON / OFF Button

AP Management

WLAN

WLAN Setting

LAN B

A1(PoE)

A3

A4A2

LAN

Factory

Reset

OFF

ON

PWR

LAN B x 1

Vigor Router

PoE x 1

LAN A x 4

AP Status

VigorAP 810

991-08 100 00-00

Specifications subject to change at any time without notice, for more information please visit www.draytek.com or contact your local representative.