DrayTek VigorAP 802 User Manual

Datasheet
VigorAP 802
Feature-rich, powerful
and compact Mesh
access point
Product Overview
VigorAP 802 is a feature-rich and easy to use AC1200 Mesh Wireless Access Point with a single Gigabit LAN Port, designed to boost signal & speed, ensure perfect
coverage and create a smooth wireless experience.
Key Features & Benets
InVIGORate your
DrayTek Mesh AP
Mesh
VigorAP 802 Mesh acts as a mesh node to connect to other access points and a compatible DrayTek mesh root (eg VigorAP 903).
Eliminates ethernet cabling.
Benets: Truly wireless Wi-Fi. Reduces signicantly the cost of the
network deployment.
Sleek Design
Simply plug the VigorAP 802 in to a UK wall plug power socket to expand wireless coverage. No need for additional power adapters or
cables.
Benets: Compact and easy to install.
Gigabit LAN Port
Transfer from Wireless to Wired Ethernet devices without bottlenecks, using the Gigabit LAN port underneath. In the Access Point mode, use
the Ethernet port for a fast uplink to the router and the Internet.
Benets: Connect wired ethernet devices via wireless at high speed,
avoiding long cable runs.
Easy to Congure and Manage
Use the DrayTek Wireless app to automatically congure a new VigorAP 802 wireless access point into the network. Compatible with all DrayTek’s management platforms - VigorACS cloud, VigorConnect, Router AP Management, or directly via the AP’s Web Interface.
Benets: Quick to install or change conguration.
Auto-Optimisation
Mesh Nodes identify the best next hop and connect with it automatically. In case of a Mesh Node failure, the surrounding nodes automatically re-connect and resume service without downtime.
Benets: Eliminates wireless dead zones. Zero downtime.
Wireless Optimisation
Band Steering: Ensures 5GHz capable devices can achieve optimum speeds. Airtime Fairness: Improves time management between wireless clients. AP Assisted Roaming: Makes sure that devices are always connected to the best AP.
Benets: Improve wireless network eciency.
Simple & fast setup with the Draytek Wireless App
Perfect for:
Smart Home
Oces & Oce
Buildings
Schools &
Universities
Retail Shops &
Department Stores
Bars,
Restaurants &
Clubs
DrayTek VigorAP 802
Operating Modes:
Mesh Node
Range Extender
Access Point
Physical Interfaces/Controls:
Gigabit Ethernet LAN Port (10/100/1000Mb/s)
LED On/O and Reset Button
Wireless Performance:
AC1200 Class Wireless Access Point
5GHz: PHY Rate 866Mb/s
2.4GHz: PHY Rate 300Mb/s
Wireless LAN Compatibility:
IEEE 802.11ac / a / b / g / n
Frequency Band 2.4 GHz & 5.8Ghz - Simultaneous Operation
Up to 32 clients per radio
2.4GHz Wireless LAN Features:
802.11b, 802.11g, 802.11n
20 / 40 MHz
Up to 300Mb/s total Wi-Fi throughput (PHY Rate):
802.11b/g/n: 300Mb/s PHY rate (150Mb/s per Spatial Stream)
5Ghz Wireless LAN Features:
802.11ac / 802.11n / 802.11a
20 / 40 / 80 MHz
Extended 5Ghz Band - Channels 36-48, 52-64, 100-140
DFS/TPC Support
Up to 866Mb/s total Wi-Fi throughput (PHY Rate):
802.11a/n: 300Mb/s PHY rate (150Mb/s per Spatial Stream)
802.11ac: 866Mb/s PHY rate (433Mb/s per Spatial Stream)
Security Features:
Wireless Encryption : WPA2 (802.11i) Encryption and it also supports WPA/WEP (Not recommended)
Built in 802.1x server (PEAP / EAP-TLS)
802.1x RADIUS Proxy (PEAP / EAP-TLS)
PMK Caching & Pre-authentication
Wireless Client Isolation
Control Isolation of 2.4GHz and 5GHz bands
Hidden SSIDs (Selectable)
WPS - WiFi Protected Setup
MAC Address Filtering (ACL) - Up to 256 entries
Mobile Device Management
EAPOL Key Retry - New! - Protect unpatched WLAN clients from KRACK
Wireless Performance Optimisation:
Airtime Fairness
Band Steering
AP-Assisted Client Mobility
WMM (Wireless MultiMedia)
Bandwidth Management (Per Station / Per SSID)
IGMP Snooping
Management Interfaces:
Web Interface (HTTP/HTTPS)
Central AP Management (from compatible DrayTek router/controller)
DrayTek Wireless app
VigorACS and VigorConnect (TR-069)
CLI (Command Line Interface) – Telnet
Management Features:
DHCP Client
Firmware upgrade by TR-069/HTTP
SNMP v2, v2c, v3
Management VLAN
LED Control (enable/disable/schedule)
Conguration File Export (with password) & Import
Diagnostic Features:
System Log
Speed Test
Trac Graph - AP Trac & Per Station
Data Flow Monitor - View live trac usage per WLAN client
Wireless LAN Statistics
Interference Monitor - Built-in Site Surveyor
Power Requirements:
Maximum Power Consumption: 7.5 Watt
UK Plug Fitting (BS1363)
100-240v AC Power Input
Integrated DC PSU
Environmental & Physical:
Operating Temperature : 0 ° C to 40 ° C
Storage Temperature : -20 ° C to 60 ° C
Operating Humidity: 10% to 90% (Non-condensing)
Physical Dimensions: 59mm (W) x 91mm (H) x 40mm (D)
(power plug not included)
Weight : 130g
Fitting: Wall Mounted via electrical socket
Pack Contents: VigorAP 802 access point, Quick Start Guide
Warranty: Two (2) Years RTB
Wireless Control Features:
Wireless Client Status List in WUI
Client Limit per radio
Client Limit per SSID
Up to 2 distinct SSIDs (for VLANs) for each frequency band (2.4/5Ghz)
MAC Cloning
802.1q VLAN
VLAN over Mesh - New! – Create 2 separate networks over Mesh
Station Control - Time limit wireless connectivity per Station (e.g. 1 hour) & set allowed Reconnection time (e.g. 1 day)
Email: info@draytek.co.uk Telephone: +44 345 5570 007
Specications, content and product availability are subject to change and may di󰀨er from country to country. Actual Performance may vary depending on applications, usage, environment and other factors. Full specications are available at https://www.draytek.co.uk
Loading...