Draytek Vigor 2600 VGST Self-installation Manual

Installation of DSL Connection and
DSL router DrayTek Vigor 2600 VGST

Self-Installation Guide

Further information available:

■ at www.t-com.sk

© August 2006, Slovak Telekom, a. s.

Notes

21 > Self-Installation Guide

Contents

If you have any qu estions during t he installati on, contact:

Technical Sup port Centr e 0900 211 111

If you have any problems when installing the DSL c onnection. The Cen tre is available from 8 a.m.
to 8 p.m. on business days and from 9 a.m. to 5 p.m. during weekends and public holidays. Calls
are charge d by a special premium tariff.

Internet H otline 0800 123 777

If you have a pro blem with verification of login or password or need information about your
e-ma il account. It is available from 7 a.m. to 10 p.m. on busine ss days. Calls are free of charge.

Fault Repor ting Centre 12129

If you want to rep ort a fault or if you ne ed to replace a telephone s ocket. It is available 24 hours
a day. Calls are free of charge.

Technical Supp ort Centre of t he DSL router supp lier 02/44 64 18 32

If you have technical ques tions regarding the router. It is available from 9 a.m. to 5 p.m. on
business days. Call s are charged according to standa rd tariffs.

3 Preface
4 Installation Package Content s
5 Installing th e DSL Connection on a Standard Telephone Line
8 Diagram of the O verall DSL Connection in the case of a Standa rd Telephone Line
9 Installing th e DSL Connection on an ISDN Line
13 Diagram of the Overa ll DSL Connection in the case of an ISDN Line
14 Insta llation of DSL router Dr ayTek Vigor 2600 VGST
19 Testing the Cor rect Connection

Preface

Congrat ulations on your purch ase of the DSL self- installation pack age, which, combine d with
an Interne t access servic e, enables you to enjoy a high -speed Intern et connection. It is a p erfect
solution f or all our customers wh o need to increase the ef ficiency of workin g on the Internet,
reduce the t ime necessar y for downloading larg e data volumes, and he nce make full use of the
Internet . Please carefully rea d this Guide describin g the procedure of equip ment installation an d
the ser vices for high-s peed DSL access to the I nternet using a stand ard telephone line or an I SDN
line. The ins tallation is ver y easy – you can do it your self by following the en closed procedure s and
diagrams.

Important Notice:
Please chec k the function ality of your sta ndard telepho ne line or ISDN li ne and the
contents o f the package prio r to the installa tion.

We disclaim a ny liability fo r correct insta llation of your op erating system an d for protectin g
your PC again st security th reats connecte d with Internet usa ge. Therefore we adv ise you
to install a ppropriate sec urity progr ammes to your compu ter prior to conn ecting to the
Internet f or the first time . We recommend our P C Secure serv ice from Panda So ftware,
which prov ides a compreh ensive protect ion to your PC and Int ernet connect ion. You can
install a tes t version of this sof tware from th e enclosed insta llation CD or dow nload it from
www.t- com.sk. For mo re informatio n contact Inte rnet Hotline [phone].

Test the correct ness of the insta llation and fun ctionalit y of the connect ion using the
test login a nd password inclu ded at the end of th is Guide in secti on Testing the Correc t
Installation.

Your computer sh ould meet at least t he following re quirements

1

:

■ network card 10/100 MB, Internet Explo rer 5.5 or higher

1

Not applic able to PC Secure.

2 3

> Self-Installation Guide > DSL router DrayTek Vigor 2600 VGST

Installing the DSL Connection on a Standard Telephone Line

Check the socket of your standard telephone
line.

1. Your standard telephone line must be
terminated w ith a separate socket with
a single RJ 11 connector (s ee figure on the
right). If t here are several sockets (paralle l
sockets), find out, w hich one is the main
socket (primary).

2. If your te lephone socket is unsuitable (it has
a differe nt connector) or if ther e are other
sockets connected to it (parallel so ckets)
which cann ot be disconnected, contact t he
Fault Repor ting Centre a t 12129.

3. There should not be an alarm (s ecurity
device) connected to your te lephone line.
Switch the al arm off before the ins tallation;
otherwise the ala rm may become
dysfunc tional. Connect the alarm back after
you have succ essfully install ed the DSL
connection.

Installation CDSelf-Installation Guide

Installation Package Contents

Cable wit h RJ 11 connector s
(designe d for connecting
the telephone socket with
the DSL spli tter)

4 5

The package o f DSL router DrayTek Vigor 26 00 VGST contain s:

■

installation guide and installation CD

■

DSL router D rayTek Vigor 2600 VGST

■

adapter

■

two exter nal antennas to router

■

interconne ction LAN UTP cab le with RJ 45 connectors for
connecting of the router to a PC

■

interconne ction cable with dif ferent connector s for connecting
of the router w ith a splitter

DSL splitter

You can install your DSL Connection an d DSL router DrayTek Vigor 2600 VGST using the
enclosed m anual or the installat ion CD Internet. If you ch ose the latter, inser t the enclosed CD
to your computer’s drive. I f the content does not open automatically, launch th e START.EXE
programme from the CD’s main director y. On the title page, select “Inš talácia DSL int ernetu”
from the main menu and then “Inšta lácia DSL pripo jenia”.

RJ 45 connector
(bigger and wider)

RJ 11 connector
(smaller)

There are n ormally 2 typ es of
connectors used:

Suitable
telephone socket

Unsuitable
telephone socket

There are n ormally 2 typ es of sockets
used:

> Self-Installation Guide > DSL router DrayTek Vigor 2600 VGST

Follow the in stallation ste ps bellow:

1. Pull out the cable conne cting other devices,
such as a telephone, other telephone s ockets,
fax, or modem, from the telephone socket.

2. Plug the p ulled-out cab le end to the splitter
port labelled PHONE.

3. Use the separate c able included in the
installa tion package (both jacks identica l
– RJ 11) to connect the telepho ne socket with
the split ter port labelled LINE.

4. Use the other cable (with connectors of
different sizes), to connect DSL router
DrayTek Vigor 2600 VGST with the splitter.
Plug the bigger connector of the cable into
the larger port on the back of the DSL router
labelled ADSL; plug the smaller connector of
the cable in the splitter port labelled DSL.

5. Proceed with the DSL router installation by
following the instructions on page 14.

6 7

> Self-Installation Guide > DSL router DrayTek Vigor 2600 VGST

Installing the DSL Connection on an ISDN LineDiagram of the Overall DSL Connection in the case

of a Standard Telephone Line

Your ISDN line is terminated with a telephone
socket with an RJ 11 connector (see figure on
page 5). The telephone socket is connected to
the ISDN – NT end point (euro NTBA).

Legend to a suitable NT:

1. manufacturer label (Siemens, Alcatel, Aethra)

2. line-in jack with a line cable (not fixed)

3. two ISDN-out jacks (side by side)

4. 230 V connector

8 9

DSL cable
– accesso ries to
the DSL router

Enclosed separate
cable to splitter

DSL router
DrayTek Vigor 2600 VGST

Splitter

Your telephone set

Your telephone cab le

Tel eph one soc ket

> Self-Installation Guide > DSL router DrayTek Vigor 2600 VGST

2. 3. 4.

Suitable NT

1.

Suitable
telephone socket

Unsuitable
telephone socket

There are n ormally 2 typ es of sockets
used:

3. Use the other cable (with connectors of
different sizes), to connect DSL router
DrayTek Vigor 2600 VGST with the splitter.
Plug the bigger connector of the cable into
the larger port on the back of the DSL router
labelled ADSL; plug the smaller connector of
the cable in the splitter port labelled DSL.

4. Proceed with the DSL router installation by
following the instructions on page 14.

If your telep hone socket is unsuit able (it has
a differe nt connector) an d the connecti ng
cable can not be pulled out , however your NT
has a line–i n jack that can be p lugged out
(suitable N T – see figure on page 9 ), follow
the steps below:

1. Pull out the NT line cable from the socket and
plug it into the splitter port labelled LI NE.

10 11

If you have a suit able socket, from w hich the
connect or can be pulled o ut, follow the ste ps
below:

1. Pull out the cable from th e socket and plug it
into the splitter por t labelled PHONE.

2. Use the separate c able included in the
installation packag e (both connectors are
identical – RJ 11) to connec t the telephone
socket with t he splitter using the connector
labelled LINE.

> Self-Installation Guide > DSL router DrayTek Vigor 2600 VGST

Diagram of the Overall DSL Connection in the case
of an ISDN Line

12 13

2. Conn ect the unoccupied s ocket on the NT
equipment (in point 1) with the s plitter port
labelled PHONE using the s eparate enclosed
cable (both connectors identical – RJ 11).

3. Proceed with the third bullet p oint of the
preceding procedure.

If your telep hone socket is unsuita ble (it has
a differe nt connector – ple ase see figure on
page 9) and t he connecting ca ble cannot be
pulled out o r your NT has a line–in jac k that
cannot be plugged out, contact our Fault
Re por tin g Ce ntr e 1212 9.

Legend to an unsuitable NT:

1. power cord

2. cable – line-in jack (fixed)

3. ISDN-out jack

230 V

Your telephone cab le

Enclosed separate
cable to splitter

DSL cable
– accesso ries to
the DSL router

Telephone socket

Your NT (Network termination)

Splitter

DSL router
DrayTek Vigor 2600 VGST

You r ISD N
telephone set

> Self-Installation Guide > DSL router DrayTek Vigor 2600 VGST

1. 2. 3.

Unsuitable NT

Installation of DSL router DrayTek Vigor 2600 VGST

14 15

Impor tant Notice:
In case of operating system OS Windows
2000 or XP it is recommended to install
the most rec ent Service pa cks. For further
information, please contact Microsof t
Slovensko at 0 850 111 300 or our Technical
Suppor t Centre at 0900 211 111.

1. Installation procedure of network
set-up on your PC

In order to be able to work with DSL
router Vigor 2600 VGST, the network card
properties need to be set up properly on
your PC. The most convenient solution
is to set up TCP/IP protocol properties in
a manner enabling to acquire the IP address
from the DHCP server, i.e. your Vigor 2600
VGST router. Also, it is necessary to ensure
when setting the system that the DNS server
address is requested automatically.

You can set up network on your PC taking the
following steps:

1. Click on “Štart“ icon.

2. Select item „Nastavenia“.

3. Select item „Ovládací panel“.

4. Click on the icon “Sieťové pripojenia”.

5. Right- click on the icon “Local Area
Connection“ and choose ”Vlastnosti“.

6. Click on “Internet Protocol (TCP/IP)“ and
then “Vlastnosti“.

7. Select “Získať adresu IP automaticky“.

8. Select “Získať adresu servera DNS
automaticky“.

9. Click on “OK“.

Connec ting DSL router D rayTek Vigor
2600 VGST to your PC

1. Plug the LA N UTP cable (blue) into the
networ k card connector on your PC, the
other end of th e cable plug into one of the
4 connecto rs (P1 through P4), e.g. P1 on the
back panel of t he router Vigor 2600 VGS T.
If you use mor e than 1 PC, connect ano ther
computer to th e P2 connector, third one to
P3 and four th one to P4 connector.

2. Plug the adapter into power supply (230 V )
and plug the adapter cabl e to the DSL
router connecter labelled PWR and then
change the switch to “ON” p osition

3. Now, you r DSL router Vigor 260 0 VGST is
on and ready for selected configuration
over any PC in you r network; you can verify
the statu s by a flashing ACT diode and
P1 diode glowin g continuously (in case
several PCs are connec ted, also P2, P3 and
P4 diodes). It i s possible that also the LINK
diode will flash on your D SL router as well;
this confirms correct confi guration of the
DSL line on the part of T- Com.

4. If the W LAN diode glows o n your DSL router
Vigor 260 0 VGST, wireles s connection
(WiFi) to the D SL router is activate d using
a wireles s network card (ma x. 54 Mbps)
connecte d to your PC. The default set up of
WiFi connectivity enables you to immediately
connect to a r outer, which automatical ly
assigns a n IP address to your PC. This

means that n o WiFi protecti on is activated
on the rout er and for the sake of s ecurity
it is recomm ended to set up sec urity
as soon as pos sible. More information

available i n the DSL router manual.

> Self-Installation Guide > DSL router DrayTek Vigor 2600 VGST

16 17

Impor tant Notice Pri or to Installat ion
In case you used I nternet connec tion
on your PC, set you r browser (Intern et
Explor er etc.) to disable r equesting
Internet co nnection via dia l-up.

In case you us e Internet Expl orer, follow the
instructions below:

1. Launch Inte rnet Explorer (c licking on the
“Internet Explorer” icon).

2. In the m enu “Tools” choose item “I nternet
options“.

3. Select item “Connections”.

4. Confirm “ Never dial a connec tion”.

5. Click “OK“.

2. DSL Router Configurator Launch

After connecting of P Cs to the DSL router,
each connected PC will be assigned an IP
address w ithin the scope 192.168.1.10 to

192.168.1.60. Launch your Internet brow ser
(Internet Explorer etc.) and en ter the address

192.168.1.1 (DSL router address) into the fiel d
for addresses (used for e ntering www site s
addresses) and pres s “Enter“. Doing so you
will connect to your DSL ro uter, which will
request a u ser name and passwor d, not set
by default. T herefore, all you need to do is
click “OK” wi thout entering a user name and
password.

The main menu of configur ator is displayed
using which you can admini ster and monitor
DSL router a ctivity. The menu is in English
or Slovak language dep ending on the router
firmware version.

In the offer “Rýchle nastaveni a” click on
“Prístup do internet u“, on the next page click
on link PPPoE/PPPoA and the site PPPoE/
PPPoA in client mode will be displayed:

Following the example on the Figure, set up
the following items:

PPPoE/PPPoA client:

■ Zapnutý

DSL router setup:

■ VPI : 1

■ VCI : 32

■ Ty p zap uzdre nia: LLC/S NAP

■ Protokol: PPPoE

■ Modulácia: G.DMT

> Self-Installation Guide > DSL router DrayTek Vigor 2600 VGST

Testing the Correct Connection

18 19

Setting up the p rovider:

To test your Internet connection, first
use the test userna me and password on
page 20 in section Internet – Internet
Connection Functionality Check. After

checking the DSL c onnection functio nality,
you can connect to t he Internet using your
username and password.

After sett ing all parameters it is nec essary
to confirm and sav e the setup in the DSL
router by clicking on “Confirm”. Now,
your DSL router is configured for Internet
connection. You can c heck whether you are
really connecte d to the Internet in “Správa
systému” by clicking on “Online stav“.

All you need to do now is en ter, from any PC
connected to the DS L router, a www address
in the respective field in your browser,
the DSL router will a utomatically dial the
connection a nd you can start sur fing.

This Guide is a brief set of instructions
enabling you to launc h the equipment to gain
fast Internet co nnection; explanat ion of other
functionali ties of the DSL router Vigo r 2600
VGST is available in t he digital guide on the
enclosed installation CD.

> Self-Installation Guide > DSL router DrayTek Vigor 2600 VGST

Telephone – telepho ne/digital line fu nctionalit y check

The dialling tone should be heard from the receiver of your telephone/fax. Try to make a call
and check the qual ity of sound in the rece iver. If you installed the d evice correctly, the q uality of
sound did not chang e compared to the condi tion prior to the instal lation.

Possible problems:

■ the dialling tone is no t heard

■ disturbing so unds (noise, crackling) h eard from the receiv er

■ calls cannot be m ade from the telephone

Telephone line outag es may occur during the DS L installation; a dig ital line may be functi onal
1 minute after the N T was connected to the spli tter. If these faults have n ot disappeared af ter
a repeated check o f the connection car ried out according to t he Guide, contact our Fault

Rep or tin g Ce nt re 1212 9.

Router – DSL Conn ection Functi onality Che ck

Check status of t he indication diodes o n your router and compar e it to the description in cluded
in the documenta tion from your DSL rout er manufacturer. The rou ter should be in hiberna ting
mode.

Possible problems:

■ no control on the r outer glowing

■ status of contr ols not correspon ding to hibernating sta tus of the router

■ not connected to th e LAN network

In case you disco ver any discrepancies , check the entire inst allation procedur e again. If you do
not succeed in re solving the proble m, contact our Technical S upport Cen tre at 0900 211 111,

or the Technical Supp ort Centre of t he DSL router supp lier at 02/44 64 18 32.

20

Internet – Inter net Connecti on Functionali ty Check

To check whether your rou ter has been install ed correctly and wh ether your DSL line is
functional, ch eck the “LINE” LED diod e on your DSL router. If the LED is f lashing, the router is
synchronisin g itself with the DSL lin e. To test the Internet connect ion, wait until the LED tur ns
solid green.

For testing of the Inte rnet connection, p lease use the following a ccount:
Login: dsl@test
Password: dsl

To test the DSL function ality of your connec tion, write the web add ress www.t-c om.sk in your
Internet brows er (Internet Expl orer, Netscape, Firefox etc .) serving for the pur poses of testing
the functional ity of the installat ion. The functionali ty can be tested only o n this web site; access
to other web sites wil l be disabled. If the rel evant page is displayed, t he DSL connection is
functional. Now you can log in with the l ogin and password yo u were provided by you r

Internet ser vice provider. High -speed Int ernet is ready and yo u can start wor king on and
enjoying the In ternet. In case of a ny problems wit h the connect ion, please cont act the
Internet Hotl ine 0800 123 777.

> DSL router DrayTek Vigor 2600 VGST