DrayTek Vigor 2110, Vigor 2110n, Vigor 2110Vn Quick Install Guide

Vigor2110F Series Quick Start Guide

Vigor2110F Series

Fiber Router

Quick Start Guide

Version: 1.0

Date: 03/11/2009

iii

Vigor2110F Series Quick Start Guide

Trademarks

Copyright 2009 All rights reserved. This publication contains information that is protected by copyright. No part may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language without written permission from the copyright holders.

The following trademarks are used in this document:

z Microsoft is a registered trademark of Microsoft Corp. z Windows, Windows 95, 98, Me, NT, 2000, XP, Vista and Explorer are

trademarks of Microsoft Corp.

z Apple and Mac OS are registered trademarks of Apple Inc. z Other products may be trademarks or registered trademarks of their

respective manufacturers.

Safety Instructions and Approval

Safety Instructions

Warranty

z Read the installation guide thoroughly before you set up the router. z The router is a complicated electronic unit that may be repaired only be

authorized and qualified personnel. Do not try to open or repair the router yourself.

z Do not place the router in a damp or humid place, e.g. a bathroom. z Do not stack the routers. z The router should be used in a sheltered area, within a temperature range

of +5 to +40 Celsius.

z Do not expose the router to direct sunlight or other heat sources. The

housing and electronic components may be damaged by direct sunlight or heat sources.

z Do not deploy the cable for LAN connection outdoor to prevent electronic

shock hazards.

z Keep the package out of reach of children. z When you want to dispose of the router, please follow local regulations on

conservation of the environment. We warrant to the original end user (purchaser) that the router will be free from any defects in workmanship or materials for a period of two (2) years from the date of purchase from the dealer. Please keep your purchase receipt in a safe place as it serves as proof of date of purchase. During the warranty period, and upon proof of purchase, should the product have indications of failure due to faulty workmanship and/or materials, we will, at our discretion, repair or replace the defective products or components, without charge for either parts or labor, to whatever extent we deem necessary tore-store the product to pr o per o perating condition. Any replacement will consist of a new or re-manufactured functionally equivalent product of equal value, and will be offered solely at our discretion. This warranty will not apply if the product is modified, misused, tampered with, damaged by an act of God, or subjected to abnormal working conditions. The warranty does not cover the bundled or licensed software of other vendors. Defects which do not significantly affect the usability of the product will not be covered by the warranty. We reserve the right to revise the manual and online documentation and to make changes from time to time in th e contents hereof without obligation to notify any person of such revision or changes.

Be a Registered Owner

Firmware & Tools Updates

Web registration is preferred. You can register your Vigor router via http://www.draytek.com.

Due to the continuous evolution of DrayTek technology, all routers will be regularly upgraded. Please consult the DrayTek web site for more information on newest firmware, tools and documents.

http://www.draytek.com

Vigor2110F Series Quick Start Guide

European Community Declarations

Manufacturer: DrayTek Corp. Address: No. 26, Fu Shing Road, HuKou Township, HsinChu Industrial Park, Hsin-Chu, Taiwan 303 Product: Vigor2110F Series Router

DrayTek Corp. declares that Vigor2110F Series of routers are in compliance with the following essential requirements and other relevant provisions of R&TTE Directive 1999/5/EEC.

The product conforms to the requirements of Electro-Magnetic Compatibility (EMC) Directive 2004/108/EC by complying with the requirements set forth in EN55022/Class B and EN5 5024/Class B.

The product conforms to the requirements of Low Voltage (LVD) Directive 2006/95/EC by complying with the requirements set forth in EN60950-1.

Regulatory Information

Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

z Reorient or relocate the receiving antenna. z Increase the separation between the equipment and receiver. z Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

z Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device may accept any interference received, including interference that may cause undesired

operation.

Please visit http://www.draytek.com/user/AboutRegulatory.php

This product is designed for POTS and 2.4GHz WLAN network throughout the EC region and Switzerland with restrictions in France. Please see the user manual for the applicable networks on your product.

Vigor2110F Series Quick Start Guide

TTaabbllee ooff CCoonntteennttss

1. Introduction........................................................................................................... 1

1.1 Panel Explanation ...................................................................................................................... 2

1.1.1 For Vigor2110F............................................................................................................. 2

1.1.2 For Vigor2110FV...........................................................................................................4

1.1.3 For Vigor2110Fn...........................................................................................................6

1.1.4 For Vigor2110FVn......................................................................................................... 8

1.2 Package Content...................................................................................................................... 10

2. Installing Your Router..........................................................................................11

2.1 Hardware Installation.................................................................................................................11

Stand Installation.................................................................................................................. 12

2.2 Printer Installation..................................................................................................................... 13

3. Configuring Web Pages..................................................................................... 19

3.1 Accessing Web Page ............................................................................................................... 19

3.2 Basic Configuration..................................................................................................................20

3.3 Wireless Configuration.............................................................................................................24

3.3.1 Basic Wireless LAN Concept......................................................................................24

3.3.2 General Setup.............................................................................................................24

3.3.3 Security Settings.........................................................................................................26

4. Trouble Shooting................................................................................................ 28

4.1 Checking If the Hardware Status Is OK or Not.........................................................................28

4.2 Checking If the Network Connection Settings on Your Computer Is OK or Not ...................... 29

4.3 Pinging the Router from Your Computer..................................................................................31

4.4 Checking If the ISP Settings are OK or Not.............................................................................32

4.5 Backing to Factory Default Setting If Necessary...................................................................... 34

4.6 Contacting Your Dealer ............................................................................................................35

vii

Vigor2110F Series Quick Start Guide

viii

11.. IInnttrroodduuccttiioonn

Vigor2110F series is a broadband router which connects to Internet through optical fiber (up to 100MB/sec).The Vigor2110F series features advanced bandwidth control mechanism such as IP-layer QoS, NAT Session Limitation, Bandwidth Borrowed, etc., to allow easy, flexible, reliable access control and bandwidth management.

The SPI (Stateful Packet Inspection) firewall uses object-based design to make settings of firewall policies easy. The CSM (Content Security Management) feature allows more precise and efficient access control for URL/Web Content Filtering, IM (Instant Messenger) and P2P (Peer to Peer) applications.

Vigor2110F supports up to 2 VPN tunnels using advanced protocols such as IPSec/PPTP/L2TP/L2TP over IPSec with AES/DES/3DES for encryption and MD5/SHA-1 for authentication.

Vigor2110 ‘n’ models comply with 802.11n Draft-n standards. They support WEP/WPA/WPA2 encryption and MAC Address Control, Wireless LAN Isolation. The Wireless Rate Control function can adjust the data rate of each wireless station (client).

Vigor2110 ‘V’ models provide two analogue phone connectors and one line port. It supports multiple SIP registrars with high flexible configuration and call handing options.

In addition, Vigor2110F series supports USB interface for connecting USB printer to share printer or USB storage device for sharing files. Vigor2110F series provides two-level management to simplify the configuration of network connection. The user mode allows user accessing into WEB interface via simple configuration. However, if users want to have advanced configurations, they can access into WEB interface through admin mode.

Vigor2110F Series Quick Start Guide

11..11 PPaanneell EExxppllaannaattiioonn

11..11..11 FFoorr VViiggoorr22111100FF

LED Status Explanation

ACT (Activity)

CSM On The profile(s) of CSM (Content

LAN 1/2/3/4

VPN On The VPN tunnel is active. QoS

WCF On The profile(s) of CSM (Content

Interface Description

WAN Connector for accessing the Internet. LAN (1-4) Connectors for local networked devices. USB Connector for USB storage device (Pen

Blinking The router is powered on and running

normally.

Off The router is powered off.

Security Management) for IM/P2P, URL/Web Content Filter application can be enabled from Firewall >>General Setup. (Such profile must be established under CSM menu).

On The WAN port is connected. WAN Blinking It will blink while transmitting data. On The port is connected. Off The port is disconnected. Blinking The data is transmitting. On A USB device is connected and active.USB Blinking The data is transmitting.

On The QoS function is active. On The DoS/DDoS function is active. DoS

Blinking It will blink while detecting an attack.

Security Management) for Web Content Filter application can be enabled from Firewall >>General Setup. (Such profile must be established under CSM menu)

Driver/Mobile HD) or printer.

Vigor2110F Series Quick Start Guide

Interface Description

Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press

the hole and keep for more than 5 seconds. When you see the ACT LED begins to blink rapidly than usual, release the button. Then the router will restart with the factory default configuration.

PWR Connector for a power adapter. ON/OFF

Power Switch.

Vigor2110F Series Quick Start Guide

11..11..22 FFoorr VViiggoorr22111100FFVV

LED Status Explanation

ACT (Activity)

CSM On The profile(s) of CSM (Content

LAN 1/2/3/4

Phone1/ Phone2

Line

WCF

WPS

WPS Button

Interface Description

WAN Connector for accessing the Internet. LAN (1-4) Connectors for local networked devices. USB Connector for USB storage (Pen Driver/Mobile

Blinking The router is powered on and running

normally.

Off The router is powered off.

Security Management) for IM/P2P, URL/Web Content Filter application can be enabled from Firewall >>General Setup. (Such profile must be established under CSM menu).

off-hook.

Off The phone connected to this port is

on-hook.

Blinking A phone call comes. On A PSTN phone call comes (in and out).

However, when the phone call is disconnected, the LED will be off

about six seconds later. Off There is no PSTN phone call. On The profile(s) of CSM (C ontent

Security Management) for Web

Content Filter application can be

enabled from Firewall >>General

Setup. (Such profile must be

established under CSM menu) On The WPS is on.

Off The WPS is off. Blinking Waiting for wirele ss clie nt sending

requests for connection about two

minutes. On Press this button for 2 seconds to wait

for client device making network

connection through WPS. When the

LED lights up, the WPS connection

will be on. Off The WPS is off. Blinking Waiting for wirele ss clie nt sending

requests for connection about two

minutes.

HD) or printer.

Vigor2110F Series Quick Start Guide

Interface Description

Line Connector for PSTN life line. Phone2/Phone1

Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press

PWR Connector for a power adapter. ON/OFF

Connector of analog phone for VoIP communication

the hole and keep for more than 5 seconds. When you see the ACT LED begins to blink rapidly than usual, release the button. Then the router will restart with the factory default configuration.

Power Switch.

Vigor2110F Series Quick Start Guide

+ 30 hidden pages