The following trademarks are used in this document:
Microsoft is a registered trademark of Microsoft Corp.
Windows 8, 10 and Explorer are trademarks of Microsoft Corp.
Apple and Mac OS are registered trademarks of Apple Inc.
Other products may be trademarks or registered trademarks of their
respective manufacturers.
Safety Instructions and Approval
Safety
Instructions
Read the installation guide thoroughly before you set up the modem.
The modem is a complicat ed electronic unit that may be repaired only be
authorized and qualified personnel. Do not try to open or repair the
modem yourself.
Do not place the modem in a damp or humid place, e.g. a bathroom.
Do not stack the modems.
The modem should be used in a sheltered area, within a temperature
range of 0 to +45 Celsius.
Do not expose the modem to direct sunlight or other heat sources. The
housing and electronic components may be damaged by direct sunlight
or heat sources.
Do not deploy the cable for LAN connection outdoor to prevent
electronic shock hazards.
Keep the package out of reach of children.
When you want to dispose of the modem, please follow local regulations
on conservation of the environment.
Warranty
We warrant to the original end user (purchaser) that the modem will be free
from any defects in workmanship or materials for a period of two (2) years
from the date of purchase from the dealer. Please keep your purchase receipt
in a safe place as it serves as proof of date of purchase. During the warranty
period, and upon proof of purchase, should the product have indications of
failure due to faulty workmanship and/or materials, we will, at our discretion,
repair or replace the defective products or components, without charge for
either parts or labor, to whatever extent we deem necessary tore-store the
product to proper operating condition. Any replacement will consist of a new
or re-manufactured functionally equivalent product of equal value, and will
be offered solely at our discretion. This warranty will not apply if the produ ct
is modified, misused, tampered with, damaged by an act of God, or subjected
to abnormal working conditions. The warranty does not cover the bundled or
licensed software of other vendors. Defects which do not significantly affect
the usability of the product will not be covered by the warranty. We reserve
the right to revise the manual and online documentation and to make changes
from time to time in the contents hereof without obligation to notify any
person of such revision or changes.
iii
EU Declaration of Conformity
We DrayTek Corp. , office at No.26, Fu Shing Road, HuKou County, Hsin-Chu Industry Park, Hsinchu
300, Taiwan , R.O.C., declare under our sole responsibility that the product
Product name: 35b Modem
Model number: Vigor167
Manufacturer: DrayTek Corp.
Address: No.26, Fu Shing Rd, HuKou, HsinChu Industrial Park, Hsinchu 303,
Taiwan
is in conformity with the relevant Union harmonisation legislation:
EMC Directive 2014/30/EU , Low Voltage Directive 2014/35/EU , ErP 2009/125/EC and RoHS
2011/65/EU with reference to the following standards
Standard Version / Issue date
EN 55032 2012+AC:2016 class B
EN 61000-3-2 2014 Class A
EN 61000-3-3 2013
EN 55024 2010+A1:2015
EN 62368 2014+A11:2017
EC No. 1275/2008 2008
Hsinchu 30th December, 2020Calvin Ma / President .
(place) (date) (Legal Signature)
iv
Regulatory Information
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device may accept any interference received, including interference that may cause
undesired operation.
Company name ABP International Inc.
USA Local
Representative
Address 13988 Diplomat Drive Suite 180 Dallas TX 75234
ZIP Code 75234 E-mail rmesser@abptech.com
Contact Person Mr. Robert Messer Tel. 19728311600
More update, please visit www.draytek.com.
*The external power supply used for each product will be model dependent.
A Manufacturer CWT CWT CWT CWT CWT APD APD APD APD
B Address No. 222, Sec.
C Model identifier
D Input voltage 100~240V 100~240V 100~240V 100~240V 100~240V 100~240V 100~240V 100~240V 100~240V
Input AC frequency 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz E
Output voltage DC 12.0V 12.0V 12.0V 12.0V 12.0V 12.0V 12.0V 12.0V 12.0V
F Output current 1.0A 1.5A 2.0A 2.5A 3.0A 1.0A 1.5A 2.0A 3.0A
G Output power 12.0W 18.0W 24.0W 30.0W 36.0W 12.0W 18.0W 24.0W 36.0W
H Average active
efficiency
I Efficiency at low load
10%
J No-load power
consumption
1 2 3 4 5 6 7 8 9
2, Nankan Rd.,
Lujhu
Township,
Taoyuan
County 338,
Taiwan
2ABB012F UK 2ABB018F UK 2ABL024F UK 2ABL030F UK 2ABN036F UK WA-12M12FG WB-18D12FG WA-24Q12FG WA-36A12FG
2ABB012F EU 2ABB018F EU 2ABL024F EU
Take a look at the package content. If there is anything missed or damaged,
please contact DrayTek or dealer immediately.
Modem
Quick Start Guide
RJ-11 to RJ-45 Cable
The type of the power adapter depends on the country that the modem will be
installed. * The maximum power consumption is 4.5 Watt.
RJ-11 to RJ-11 Cable
UK-type Power Adapter
USA/Taiwan-type Power Adapter
EU-type Power Adapter
AU/NZ-type Power Adapter
1
22.. PPaanneell EExxppllaannaattiioonn
LED Status Explanation
Off The system is not ready or is failed. ACT
Blinking The system is ready and can work normally.
P1/P2
On A normal connection is through its corresponding
port.
Off LAN is disconnected.
Blinking Data is transmitting (sending/receiving).
On xDSL connection synchronized. DSL
Blinking xDSL connection is synchronizing.
Interface Description
PWR Connecter for a power adapter.
ON/OFF ON/OFF: Power switch.
Factory Reset Restore the default settings. Usage: Turn on the modem. Press
the button and keep for more than 10 seconds. Then the modem
will restart with the factory default configuration.
P2-P1 Connecter for local networked devices.
DSL Connecter for accessing the Internet through xDSL.
Note
Remove the protective film from the router before use to ensure
ventilation.
2
33.. HHaarrddwwaarree IInnssttaallllaattiioonn
This section will guide you to install the modem through hardware connection
and configure the modem’s settings through web browser.
Before starting to configure the modem, you have to connect your devices
correctly.
33..11 NNeettwwoorrkk CCoonnnneeccttiioonn
1. Connect the DSL interface to the MODEM port of external splitter with a DSL
line cable.
2. Connect the LAN port to your computer with a RJ-45 cable.
(splitter)
3. Connect one end of the power adapter to the Power port of this device.
Connect the other end to the wall outlet of electricity.
4. Power on the modem.
5. Check the POWER, ACT, LAN, DSL and INTERNET LEDs to assure network
connections.
(For the detailed information of LED status, please refer to section 2.)
Vigor167 has keyhole type mounting slots on the underside.
1. Drill the holes on the wall according to the recommended instruction.
2. Fit screws into the wall using the appropriate type of wall plug.
Note
The recommended drill diameter shall be 6.5mm (1/4”).
3. When you finished about procedure, the modem has been mounted on the
wall firmly.
4
44.. SSooffttwwaarree CCoonnffiigguurraattiioonn
To access Internet, please finish basic configuration after completing the
hardware installation.
Make sure your PC connects to this device correctly.
Note
Open a web browser on your PC and type http://192.168.1.1. A pop-up window
will open to ask for username and password. Please type “admin/admin” as the
Username/Password and click Login.
You may either simply set up your computer to get IP
dynamically from the device or set up the IP address of the
computer to be the same subnet as the default IP address of Vigor device 192.168.1.1. For the detailed information,
please refer to the section - Trouble Shooting in the User's
Guide.
5
Now, the Main Screen will pop up.
Note
The home page will change slightly in accordance with the
device you have.
Open Configuration>>WAN.
6
Click Edit to display the following page.
Enter the required information obtained from your ISP, then click Apply.
Now, you can enjoy surfing on the Internet.
7
55.. CCuussttoommeerr SSeerrvviiccee
If the modem still cannot work correctly after trying many efforts, please
contact your dealer for further help right away. For any questions, please feel
free to send e-mail to support@draytek.com.
Be a Registered Owner
Web registration is preferred. You can register your Vigor modem via
https://myvigor.draytek.com.
Firmware & Tools Updates
Due to the continuous evolution of DrayTek technology, all devices will be
regularly upgraded. Please consult the DrayTek web site for more information on
newest firmware, tools and documents.
https://www.draytek.com
8
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.