DrayTek P1280 User Manual

VigorSwitch P1280

PoE Web Smart Giga Switch

Dual-stack IPv4/IPv6 conformity for the next generation network
24 x Gigabit Ethernet with additional 4 combo UTP/SFP ports for maximum connectivity

802.3at PoE+ with 340W budget, with schedule providing power at right time
Support LLDP and SNMP for best management software compatibility
Advanced QoS for application traffic prioritization
Voice VLAN for easy VoIP devices setup and prioritize

The VigorSwitch P1280 is ideal for SOHO and small
business with the high-performance capability and IPv6
management. To cater for high bandwidth traffic, it is
equipped with 24 Gigabit Ethernet ports for the LAN side,
and 4 combo UTP/SFP ports for the backbone side.
VigorSwitch P1280 is equipped with extensive facilities for
maximizing your LAN performance, VLAN capability to
allow flexible network design, and QoS capability for
flexible bandwidth control. Furthermore, the power saving
by IEEE802.3az EEE can offer you a green Ethernet
networking environment.
The VigorSwitch P1280 also offers power to all these ports
with Power of Ethernet (PoE) capability. All PoE-enabled
devices for the business usages, such as IP phones,
wireless AP or IP Cameras can all rely on VigorSwitch
P1280 switch for the power supply, you are free to position
equipment wherever they should be, not being limited by
the power outlet.

Virtual LAN

VLAN provides a way for businesses to assign network
functions to different workgroups, branches, sections,
employees or visitors, according to their operational
requirements. VigorSwitch P1280 offers the Layer 2
Isolation feature (tag-based) VLAN for the groups.
The Voice VLAN function of VigorSwitch P1280 assigns a
preset VLAN profile with appropriate level of QoS for VoIP
traffic. This ensures that voice related traffic will not be
delayed because of inappropriate priority treatment.

QoS (Quality of Service)

With DrayTek VigorSwitch P1280, the QoS feature provides
ei g ht in t ernal queues to support eight different
classifications of traffic. High priority packet streams
experience less delay inside the switch, which supports
lower latency for certain delay-sensitive traffic. The switch
classifies the packet as one of the eight priorities according
to 802.1p priority tag, DiffServ and/or DSCP based. The
QoS operates at full wire speed.

Energy efficiency

The VigorSwitch P1280 is fully compliant with IEEE802.3az
which is an energy efficient Ethernet protocol.
The Power saving using Power Management techniques to
detect the client idle and cable length automatically and
provides the different power. The latest application-specific
integrated circuits (ASICs), using lower-power technology,
allow for lower power consumption and thinner, more
efficient designs.

PoE for Efficient Installation

24-PoE ports allow power to be supplied to end devices,
such as Wireless AP, IP Phones and IP cams, directly
through the existing LAN cables, eliminating costs for
additional AC wiring and reducing Installation Cost. It frees
your wireless AP deployment from restriction due to power
outlet location. PoE also comes with schedule feature to
provide power in a timely manner, lowing your bill of
electricity.

Bandwidth Aggregation

The Gigabit ports can be combined together to create a
multi-link load-sharing trunk. Port trunks are useful for
switch-to-switch cascading, providing very high full-duplex
speeds.

VigorSwitch P1280

PoE Web Smart Giga Switch

Combo UTP/SFP portsGigabit LAN ports

IP Version

IPv4
IPv6

Standard Compliance

IEEE 802.3 10Base-T
IEEE 802.3u 100Base-T
IEEE 802.3ab 1000Base-T
IEEE 802.3x Flow Control Capability
ANSI/IEEE 802.3 Auto-negotiation
IEEE 802.1p Class of Service
IEEE 802.1d Spanning Tree
IEEE 802.1w Rapid Spanning Tree
IEEE 802.3ad Port Trunk with LACP
IEEE 802.1AB Link Layer Discovery
Protocol (LLDP)
IEEE 802.1az Energy Efficient Ethernet

QoS

Support 8 Hardware Queues
Rate Limit
Port-based (Ingress/Egress)
Queue Setting
WRR
Strict Priority
Class of Service

802.1p CoS
DSCP
CoS-DSCP
IP Precedence

Security

Support Storm Control
DoS Attack Prevention

Link Aggregation

Supports 8 Link Aggregation Groups
with Static & LACP types
Up to 8 Ports for Each Group
Support Traffic Load Balancing

PoE

PoE Mode:
Switch allocates sufficient power the
PoE PD asked for, and dynamically
distribute power to all devices.
Status:
Status includes class and consumed
power by Pds.
Schedule

Diagnostics

CPU/RAM/Port Utilization
Event Log
Port Mirroring
Ping
Port-based Cable Test

Environmental / Physical

Power
Voltage: 100 ~ 240VAC

PoE Power Budget 0 Watt

: 34
Temperature

Operating:

0 ~ 45 C

Storage: -20 ~ 70

C
Humidity

Operating

: 10 to 90 RH (Non-condensing)

Storage

: 5 to 90 RH (Non-condensing)
Dimension: 45(H) x 441(W) x 270(D) mm

%

%

VigorSwitch P1280

VLAN

Support IEEE 802.1Q VLAN
Tag-based
Protected Port
Voice VLAN (OUI Mode)
Management VLAN

Management

Multiple User Account
Two-level Security (Admin/User)
HTTP(s) Web User Interface
HTTP(s)/TFTP Upgrade/Backup of
Firmware
Configuration
Simple Network Time Protocol
Link Layer Discovery Protocol
Simple Network Management Protocl v1/v2c
MIB-II System & Interface Groups
Support Generic Traps
Command Line Interface (CLI) via Telnet/SSH
DrayTek Switch Management

Hardware Interface

24 x 10/100/1000Mbps Giga Ethernet with
PoE+ PSE, RJ-45 (Each Port can Support Both
IEEE 802.3af / 802.3at Mode)
4 x GbE Combo Ports, RJ45 + SFP
1 x Factory Reset Button

Multicast

Up to 256 Multicast Groups
IGMP Snooping v2/v3 (BISS)
IGMP Querier
Immediate Leave

Vigor Router

PoE

IP Cameras

PoE

IP Phones

LAN

NAS

PoE
AP

991-1 28 0000- 00 G

Specifications subject to change at any time without notice, for more information please visit www.draytek.com or contact your local representative.