Draytek AP920 User Manual
Vii
V
g
g
orr
o
A
A
P
P
9
9
2
2
0
0
R
R
S
S
errii
e
e
e
s
s
Outdoor Extreme Power Wireless AP
Quick Start Guide
Version: 1.0
F/W: V1.2.0_RC1b
Date: February 12, 2017
Warranty
We warrant to the original end user (purchaser) t
(2) years from the date of purchase from the dealer. Please keep your purchase receipt in a safe place as it serves as proof of date of purchase.
During the warranty period, and upon proof of purchase, should the product have indications of failure due to faulty workmanship and/or materials,
we will, at our discretion, repair or replace the defective products or components, without charge for either parts or labor, to whatever extent we
deem necessary tore-store the product to proper operating condition. Any replacement will consist of a new or re-manufactured functionally
equivalent product of equal value, and will be offered solely at our discretion. This warranty will not apply if the product is modified, misused,
tampered with, damaged by an act of God, or subjected to abnormal working conditions. The warranty does not cover the bundled or licensed
software of other vendors. Defects which do not significantly affect the usability of the product will not be covered by the warranty. We reserve the
right to revise the manual and online documentation and to make changes from time to time in the contents hereof without obligation to notify any
person of such revision or changes.
Declaration of Conformity
Hereby, DrayTek
The full text of the EU Declaration of Conformity is available at the followi
http://www.draytek.com.tw/ftp/ VigorAP 920R/Document/CE/
Manufacturer: DrayTek Corp.
Address: No. 26, Fu Shing Road, HuKou Township, HsinChu Industrial Park, Hsin-Chu, Taiwan 303
Product: VigorAP 920R/920RP
Frequency Information for Europe area:
2.4G WLAN 2412MHz - 2472 MHz, max. TX power: 19.5dBm
5G WLAN 5470MHz - 5725 MHz, max. TX power: 28.
This product is designed for 2.4GHz/5GHz WLAN network thr
Corporation declares that the radio equipment type VigorAP 920R is in compliance with Directive 2014/53/EU
Requirements in AT/BE/BG/CZ/DZ/DK/EE/FR/DE/IS/IE/IT/EL/ES/ C
NL/NO/PL/PT/RO/SI/SK/TR/FI/SE/CH/ UK/HR. 5150MHz~5350MHz is for indoor use only.
Information
hat the access point will be free from any defects in workmanship or materials for a period of two
.
ng internet address:
0dBm
Y/LV/LI/LT/ LU/HU/MT/
oughout the EC region.
Frequency Information for FCC area:
2.4G WLAN
5G WLAN
Equipment must be professional equipment
Professionals must undergo special training and authorization
The manufacturer must provide the installation instructions to authorized personnel and follow the professional installation instructions.
The installation process must be properly installed with the correct power / cable / antenna configuration.
2412MHz - 2462 MHz, max. TX power: 29.67dBm
5180MHz - 5240MHz ,5745MHz - 5825MHz, max. TX power: 22.01dBm
Paacckkaaggee
P
Please inspect the package contents. If anything is missing or damaged, please contact
DrayTek or your dealer immediately.
Coonntteenntt
C
Main Unit
Ethernet Cable (3M)
Ground Cable
Antennas
Quick Start Guide
Note
Mount Kit
Do not use Ethernet cables with molded hood boot.
Deessccrriippttiioonnss ooff
D
LED Status Explanation
ACT Off The system is not ready or has failed.
Blinking The system is ready.
2.4G / 5G / On Wireless function is ready.
Off Wireless function is not ready.
Blinking Data is being transmitted (sending/receiving).
5G Signal (For D
Model)
The signal strength (excellent) > -50dBm.
Coo
C
mppoonneennttss
m
5G Signal (For D
Model)
5G Signal (For D
Model)
5G Signal (For D
Model)
Interface Description
Factory Reset Restore the default settings. Usage: Switch on the access point. Press and
Port1 PoE In Connector for receiving power from another device.
PoE Out
(for P Model)
Note
For the sake of safety, keep the access point away from children.
hold reset button for at least 10 seconds. VigorAP will restart with the
factory default configuration.
Before pressing the button, the cover should first be removed by rotating it
with a torque of 13 kgf-cm. After the access point has been reset, replace
the cover and lock it with the same amount of torque.
Connector for supplying power to another device.
The signal strength (good) is between -66dBm ~ -51dBm.
The signal strength (fair) is between -73dBm~ -67dBm.
No signal or the signal strength is <-73dBm.
Moouunnttiinngg tthhee
M
The VigorAP can be pole mounted depending on the installation environment. This
section will guide you through installing the VigorAP.
Note
33..11 AAnntteennnnaass IInnssttaallllaattiioonn
1. Remove the protective cap.
For the sake of personal safety, only trained and qualified personnel
should install this access point.
Acccceessss
A
Pooiinntt
P
2. Insert the antennas and fasten them by rotating clockwise.
Warning
Do not open the top cover of the device.
Installation during thunderstorms could be dangerous.
Loading...