Be sure to read the manual before using the product in order to use safely and correctly.
Please keep user manual at a place to be available easily.
!
1. Getting Started ------------------------------------ 2
2. Installation ----------------------------------------- 3
2-1. Precautions ------------------------------------------- 3
2-2. Part Name -------------------------------------------- 3
2-3. How to make installation --------------------------- 4
2-4. How to check operation ----------------------------- 6
2-5. Adjustment of Belt-Tension ------------------------- 6
3. How to use ----------------------------------------7
3-1. Detail of Display Console ------------------------ 7
3-2. Display and Console ------------------------- 8
4. Function of Program ------------------------------ 10
4-1. Main Screen -------------------------------- 10
4-2. Wi-Fi Setup ----------------------------------- 12
4-3. Bluetooth Setup ----------------------------- 13
4-4. TV Setup ----------------------------------- 13
4-5. Mirroring Setup ----------------------------- 14
5. Features by Model ------------------------------------- 15
5-1. Incline supported model series ------------------- 15
5-2. Incline non-supported model series-------------- 16
6. Part List ------------------------------------------- 17
Please make sure to read the following precautions and information before operating the
treadmill. Failure to adhere to the following will void warranty
Warning
During a service/cleaning the treadmill or for a period of non-operation, remove the
power plug from the electrical outlet. Don’t dis-assemble the Motor Cover ASSY except
permitted person.
Never operate the treadmill in case that abnormal noise or damages are detected. Please
Contact DRAX INC. Customer Support Center.
Caution
• The owner of treadmill must inform all users of the safety instructions and the
methods how to use treadmill correctly
• Always operate the treadmill in accordance with the instructions
• During installation, Treadmill is to be horizontally aligned with ground and For
Safety please make 2.5m space in treadmill rear side.
• The treadmill must be installed in the environment where it is low humidity and
low dust area.
• Do not make operation until treadmill is normally installed.(refer to “Installation”
instruction)
• Before operating the treadmill, keep children or animals off treadmill.
• The maximum weight supported by the treadmill is 180kg.
• Do not use the treadmill simultaneously more than 2 persons.
• The user is to wear appropriate clothes and shoes during using the treadmill.
Avoid the Baggy clothes for safety
• Do not bend, or place heavy objects on the power cord. Stepping on or allowing
the power cord to be crushed by a heavy object could result in electrical shock
or fire. Do not remove the plug by pulling on the cord and do not handle the
plug with wet hands. This could result in electric shock or fire.
• Do not spill food or drink on the treadmill.
• Regularly check the treadmill to keep it in the normally operation.
• There shall be a safe space of 2,000 mm × 1,000 mm behind the treadmill.
2
2
Installation
2-1.Precautions
(1) The treadmill should be installed on a flat place and horizontally aligned. If the treadmill is
placed on unstable pad or carpet, the belt may not be correctly arranged. In this case the treadmill will
be overloaded and trouble can occur.
(2) Make sure that enough space is secured in front of the treadmill so that you may find it
easy to operate the power switch.
(3) Please be sure to use a standardized plug which should be earthed
Make sure you plug the power cord into a grounded electrical outlet.
Otherwise, this could result in electric shore or fire
2-2. Part Name
12
13
① Display ② Operation-Panel ③ USB & Earphone ④ Touch Type Heartrate Sensor
⑤ Emergency STOP Key ⑥ Console ⑦ Support-Column ⑧ Motor room and Motor cover
⑨ Incline ⑩ Foot ⑪ Belt Adjustment-Bolt
3
2-3. How to installation
(1) Make sure whether “below components” are delivered or not.
(2) If some of components are not delivered, Contact DRAX INC. Customer Support Center.
Motor Cover
Main Frame ASSY
(3) To make a installation, deliver Main Frame ASSY into a flat place. For delivery, 2 or 3 Persons lift the
treadmill-rear side. You can conveniently deliver it by pushing treadmill due to front roller.
※ Caution: The treadmill must be installed in the environment where it is low humidity and low dust area.
(4) Remove the motor cover.
(5) Insert cables into right side “Support column”. And temporarily assemble between “Main Frame ASSY”
and “Support column” by using M12 Bolt(Q’ty=6EA) as shown in Fig.1.
Console Display ASSY
[Components]
Upper Frame ASSY
. Main Frame ASSY
. Upper Frame ASSY
. . Console Display ASSY
. Support Column
Support Column
. Bolt and Nut Sets
. User’s Manual
Cable Insertion
point
Support Column
MOTOR Cover
Fig.1 Assembly between “Main Frame ASSY” and “ Support Column”
(5) Temporarily join and assemble the “Upper Frame ASSY” and “Support column” by using M8
Bolts(Q’ty=6EA) as shown in Fig.1. do slightly tighten bolts
(6) Slightly tighten the M12 Bolts(Q’ty=6EA) and M8 Bolts(Q’ty=6EA) by using screwdriver.
Recommendation: Bolt-tightening torque is
- M12 Bolt : 30 N.m
- M8 Bolt : 20 N.m
Upper Frame ASSY
MAIN-Frame ASSY
4
(8) Unscrew the rear cover fixing Bolts(M5, Q’ty=5EA) on the display unit and detach the Rear Cover
(9) Assemble “Front Cover” and “Rear Cover” and fit them as shown Fig.2. After then tighten the M8
Bolt(Q’ty=4EA) with recommended Bolt-tightening torque.
Front Cover
Rear Cover
Console guide rib(2point)
Fig.2 Assembly “Front Cover” and “Rear Cover”
※ Attention: Should fit “Console guide rib” into “Console guide”. And check whether
Console guide rib is fitted or not with Console guide
(9) After Assembly of display unit is completed, connect cables(power or TV cable and etc.) to the designated
position of treadmill.
※ Attention : Before make a cable-connection, should make sure that treadmill is powered OFF
(10) After cable-connection is completed, turn the treadmill ON and check whether the treadmill operates
normally or not.
5
Reference: Cable-connection depends upon the treadmill model
2-4. How to check operation
(1) Plug the power cord into an appropriate outlet and turn the treadmill ON.
(2) Operating the treadmill and Check it’s operation status.
(3) For it, Press the START/STOP button and check whether the running belt is moved or not
(4) If running-belt is moved, check whether all of buttons are normally pressed/operated or not
(for more details, see Page 7 “How to use”).
(5) During operating the treadmill, check whether abnormal noise/vibration occurred or not.
If abnormal noise/vibration is detected, don’t operate the treadmill. Contact DRAX INC. Customer Support Center.
(6) Check whether running belt is centered or not between the left/right roller-side. If not, adjust the belt-centering
2-5 Adjustment of Belt-Tension
(1) The belt is tilted to the right.
Using a wrench (8mm), rotate the roller adjusting bolt on the right side cap groove clockwise 1/4th, then drive the
product to adjust. Repeat the same order if the position is not adjusted
(2) If the belt is tilted to the left.
Using the wrench (8mm), rotate the roller adjusting bolt on the left side cap groove one-fourth clockwise and drive
the product to adjust. Repeat the same order if the position is not adjusted
(3) If the belt is stretched out as a whole.
Using a wrench (8mm), rotate the roller adjustment bolts on both side caps homes clockwise to adjust them.
The tension of the appropriate belt is between 5 and 7 cm from the tread plate when held on either side of the belt.
Repeat the above sequence until the belt tension is in proper condition and allow to idle for 3 minutes at a speed of
You can enjoy video, music, photos, TV, Smart phone mirroring via large screen of treadmill by connecting
devices to treadmill.
- Mirroring : Smart phone mirroring supported (regarding Mirroring-usage, refer to page 14 or your smart phone user’s
manual)
- OK : OK Button.
- CANCEL : Cancel Button.
- CH▲, CH▼ : TV Channel Change-Button.
- ◀VOL, VOL▶ : Volume Change-Button.
4
5
6
7
8
8
⑦ SpeedSYNC Control Button : Treadmill’s speed for exercise can be automatically controlled by detecting the user’s
movement-style. In case that user moves to forward-direction, speed is increased. Meanwhile, speed is decreased in
case that user moves to backward-direction. SpeedSYNC Control Panel provides 3 types’ button.
- SPEEDSYNC button : Speed is automatically controlled(nominal speed-control)
- SPEEDSYNC + EXCITE button : Speed-control is optimized for the user who want to run in treadmill.
- SPEEDSYNC + COMFORT button : Speed-control is optimized for the user who want to practice jogging/walking-mode.
⑧ Quick Speed Button : There are 3 types of constant-speed mode. To use this function, turn SpeedSYNC OFF.
● Normal Type
1
2
3
① Main Screen ② Exercise Display ③ USB Port ④ Earphone ⑤ Quick Incline Button
⑥ Keypad ⑦ Program Button ⑧ Quick Speed Button
Refer to 8 for ① ~ ④ and ⑥ and ⑧.
⑤ Incline : It supports similar-function as like hiking trail-mode. It is available in Incline-supported model only.
⑦ Program Button : You can work out according to the built-in exercise program.
4
5
6
7
8
9
4 Function of Program
4-1 Main Screen
This machine’s system is android base included TV, video, and internet, etc.
TV
You can switch to the TV screen and watch TV.
You can change the channel using 'CH +/-' on the screen remote control or 'CH ▲ / ▼' on
the control panel by touching the screen.
VIDEO
You can enjoy video and music by connecting the memory to the USB terminal below the
motion display window.
WORKOUT
You can exercise with the built-in target program.
You can exercise by choosing MANUAL, FATBURN, CARDIO, PROGRAM.
INTERNET
You can enjoy the web and watch Youtube by connecting Wi-Fi.
VTOUR
You can exercise while running in several virtual cities stored in equipment.
10
MIRRORING
You can connect your smartphone and enjoy your smartphone on the big screen.
GO
A quick start button to get you started right away.
Language
You can change your language. When the power is turned off and on, the default language is
changed.
SETUP
You can make settings for the equipment functions.
CAUTION
If the SETUP setting is wrong, the equipment may not operate normally.
11
4-2 Wi–Fi Setup
1. Press SETUP at the bottom right of the screen.
2. Press 'Admin Setup', then 'WiFi Setup'.
- Password : 1100
3. Turn on Wi-Fi, find the AP you want to connect to, select it, and enter your access password.
4. When you see the message that you are connected, press the Cancel button at the bottom right.
12
4-3 Bluetooth Setup
1. Press ‘SETUP’ at the bottom right of the screen.
2. Press 'Bluetooth Setup' and search for and connect the device to connect to.
4-4 TV Setup
1. Press ‘SETUP’ in the lower right corner of the screen.
2. Press 'Admin Setup', then TV Setup'.
- Password : 1100
3. Press the 'Menu' button on the remote control on the right.
4. Use the 'Up/Down' button to go to 'TV' and press the 'OK' button.
5. From 'Tuner Mode', select 'Antenna' or 'Cable' to meet the connected specifications.
6. Go to 'Channel Scan' and press the 'OK' button to search for channels.
7. When the channel search is complete, press the Cancel button in the lower right corner
to complete the setup.
13
4-5 Mirroring Setup
1. Touch the 'MIRRORING' button on the screen or press the 'Mirroring' button on the control panel.
2. Check the 'Mirroring ID' on the bottom right of the mirroring standby screen and activate the
mirroring function of your phone.
3. On the Mirroring Standby screen, connect the mirroring according to the connection method
for each mobile phone device..
4. When mirroring is connected, the screen of the mobile phone appears on the device. From this
time, you can use your mobile phone on the big screen. However, it is impossible to operate
POWER AC 220~230V, 50/60Hz, 10A (it can be different specification according to country of electric POWER supply conditions)
EMERGENCY STOP Magnetic Holder Type
SAFETY STOP
SENSOR DETECTION OF USER
○ - ○ - ○ - ○ - ○ - ○ -
Smart Phone Mirroring (Android, iOS auto recognition)
USB connectivity, Stereo Headphone Connectivity
16
6
NR30SXA
● NR30SXA
Part List
17
6
Part List
18
7
Limited Warranty
Product Name
Model Name
Serial No.
Warranty Period
Purchase Date
1. DRAX warrants this product to be free from defects in workmanship and material, under normal use and se
ruce cibdutuibsm for a period of one year from the date of purchase(Running Belt and Motor Belt for six
months from the date of purchase). This warranty extends only to the original purchaser. DRAX obigatio
nunder this warranty is limited to replacing or repairing, at DRAX option, the product at one of its authori
zed service centers. All products for which warranty claim is made must be received by DRAX at one of
its authorized service centers with all freight and other transportation charges prepaid, accompanied by
sufficient proof of purchase. All returns must be pre-autorized by DRAX. This warranty does not extend t
o any product or damage to a product caused by or attributable to DRAX authorized service center, to pr
oducts used for specifically set forth above is authorized by DRAX.
2. DRAX is not responsible or liable for indirect, special or con sequential damages arising out of or in co
nnection with the use or performance of the product or damages with respect to any economic loss, lo
ss of property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or oth
er consequential damages of whatsoever nature.
3. The warranty extended hereunded is in lieu of any and all other warranties and aony implied warranties
of merchantability or fitness for a particual purpose is limited in its scope and duration to the terms set f
orth herein.
(6 months for Running Belt and Motor Belt)
New REDON
1year from purchasing
19
DRAX Inc.
26, Jeonpa-ro 62Beon-gil, Manan-gu, Anyang-si, Gyeonggi-do, KOREA 14086
Tel : +82-31-459-8530 Fax : +82-31-459-8531
Web : www.draxfit.com E-mail : drax@draxfit.com
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.