Draper Tools 77020 Instructions

Original Instructions

600MM FOLD DOWN

WORKBENCH

77020

EN

Version 1

EN

1. Preface

These are the original product instructions. This
document is part of the product; retain it for the life
of the product, passing it on to subsequent holders.
Read this manual in full before attempting to
assemble, operate, or maintain this product.

This Draper Tools manual describes the purpose
of the product and contains all the necessary
information to ensure its correct and safe use.
Following all the instructions and guidance in
this manual will ensure the safety of both the
product and the operator and increase the
lifespan of the product.

1.1 Product Reference

User Manual for: 600mm Fold Down Workbench

Stock No: 77020

Part No: WB600Y

1.2 Revisions

Version 1: August 2012
First release

Version 2: April 2021
General content and formatting updates

Version 3: July 2022
General content revision

As our manuals are continually updated,
always ensure that the latest version is used.

Download the latest version from:
drapertools.com/manuals

All photographs and drawings within this manual are
supplied by Draper Tools to help illustrate correct
operation of the product.

Every eort has been made to ensure the

information contained in this manual is accurate.
However, Draper Tools reserves the right to amend
this document without prior warning. Always use the
latest version of the product manual.

1.3  Understanding the Safety Content
of This Manual

WARNING! – Situations or actions that may result in
personal injury or death.

CAUTION! – Situations or actions that may result in
damage to the product or surroundings.

Important: – Information or instructions of particular
importance.

1.4 Copyright © Notice

Copyright © Draper Tools Limited.

Permission is granted to reproduce this manual for
personal and educational use ONLY. Commercial
copying, redistribution, hiring, or lending is strictly
prohibited.

No part of this manual may be stored in a retrieval system
or transmitted in any other form or means without written
permission from Draper Tools Limited.

2. Contents

1. Preface 2

1.1 Product Reference 2

1.2 Revisions 2

1.3 Understanding the Safety Content of This Manual 2

1.4 Copyright © Notice 2

2. Contents 3

3. Warranty 4

4. Product Introduction 5

4.1 Scope 5

4.2 Specication 5

5. Health and Safety Information 6

5.1 General Health and Safety Instructions 6

6. Identication and Unpacking 7

6.1 Product Overview 7

6.2 What’s in the Box? 8

7. Assembly Instructions 9

7.1 Assemble the Legs 9

7.2 Attach the Top Frames 9

7.3 Attach the Crossbars 10

7.4 Attach the U-Brackets to the Top Frames 10

7.5 Attach the Benchtops 12

7.6 Finishing Touches 12

8. Operating Instructions 13

8.1 Unfolding and Folding the Workbench 13

8.2 Clamping a Workpiece 13

9. Storage, Spares and Disposal 14

10. Explanation of Symbols 15

In all cases, this copyright notice must remain intact.

– 2 –

– 3 –

EN

3. Warranty

4. Product Introduction

Draper Tools products are carefully tested and inspected
before shipment and are guaranteed to be free from
defective materials and workmanship.

Should the tool develop a fault, return the complete tool
to your nearest distributor or contact Draper Tools
directly. Contact information can be found at the back of
this manual.

Proof of purchase must be provided.

If, upon inspection, it is found that the fault occurring is
due to defective materials or workmanship, repairs will
be carried out free of charge. This warranty period covers
parts and labour for 12 months from the date of
purchase. Where tools have been hired out, the warranty
period covers 90 days from the date of purchase.

This warranty does not apply to any consumable parts,
batteries or normal wear and tear, nor does it cover any
damage caused by misuse, careless or unsafe handling,
alterations, accidents, or repairs attempted or made by
any personnel other than the authorised Draper Tools
repair agent.

In all cases, to make a claim for faulty workmanship or
materials within the standard warranty period, please
contact or return the product to the place of purchase.
Proof of purchase may be required.

If the place of purchase is no longer trading or if you

experience any diculties with your warranty, please

contact Customer Services with the product details and
your proof of purchase. Contact details can be found at
the back of this manual.

If the tool is not covered by the terms of this warranty,
repairs and carriage charges will be quoted and charged
accordingly.

This warranty supersedes any other guarantees
expressed or implied and variations of its terms are not
authorised.

Your Draper Tools guarantee is not eective until you can

produce, upon request, a dated receipt or invoice to
verify your purchase within the guarantee period.

Please note that this warranty is an additional benet
and does not aect your statutory rights.

Draper Tools Limited

4.1 Scope

This folding workbench is designed for use as a portable
work surface and saw horse with customisable clamping
arrangements. Any other application beyond the
conditions established for use will be considered misuse.
Draper Tools accepts no responsibility for improper use of
this product.

Part of our core range, this product is suitable for regular
use by enthusiasts and tradespersons alike.

WARNING! This product is not a toy and must be
respected.

Read this manual in full before attempting to assemble,
operate or maintain the product, and retain it for later use.

4.2 Specication

Stock No. 77020

Part No. WB600Y

Dimensions:

Folded: W 605 x H 950 x D 240mm

Unfolded: W 605 x H 785 x D 640mm

Max. clamping width: 260mm

Max. load capacity: 100kg (evenly distributed)

Net weight: 6.7kg

– 4 –

– 5 –