Draper Tools 75170 Instructions

TORQUE
SCREWDRIVER

75170

1. INSTRUCTIONS

Designed for applying the correct torque for engine casing screws, camshaft position sensors, ignition coils etc.

• Locking collar prevents accidental change of torque setting.

+

•

/- 6% clockwise accuracy, complies with ISO:6789.

• Range 1-5Nm.

• Only for clockwise torque tightening, cannot be used on reverse thread fixings.

Locking collar scale

Quick release bit holder

Examples of torque settings

Increase

1. Pull out the locking collar for
setting torque, turn Left to
increase torque, turn right to
reduce torque.

• View the main scale with the angle perpendicular to the handgrip.

• In order to extend the product service life, the torque setting should be adjusted to the minimum value if the product is not
to be operated for a long period.

Reduce

Unlock

Lock

Locking
Collar
Scale

0.02 N-m.

Main
Scale

2. Torque setting is based on
main scale plus locking
collar scale. Adjust the
locking collar scale, which is
in increments of 0.02 N-m.

Main scale

3. After adjusting torque
setting, push down locking
collar into “Lock” position.

Handgrip

0.3 N-m

2 N-m

2.3 N-m

EXAMPLE- 2.3 N-m

Helpline: [phone] Sales Desk: [phone] General Enquiries: [phone] internet: drapertools.com email: [e-mail]

Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire. SO53 1YF UK. RWJB1021