SLIMLINE
FLOODLIGHTS
WITH PIR SENSOR
66036/66037/66038
These instructions accompanying the product are the original instructions. This document is part of the product,
keep it for the life of the product passing it on to any subsequent holder of the product. Read all these
instructions before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been
designed, and contains all the necessary information to ensure its correct and safe use. By following all the
general safety instructions contained in this manual, it will ensure both product and operator safety, together
with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper
Tools policy of continuous improvement determines the right to make modifications without prior warning.
1. TITLE PAGE
1.1 INTRODUCTION:
USER MANUAL FOR: Slimline Floodlights with PIR sensor
Stock No’s: 66036 / 66037 / 66038.
Part No’s: WMCL10W/PIR/B / WMCL20W/PIR/B / WMCL30W/PIR/B.
1.2 REVISIONS:
Date first published May 2017.
As our user manuals are continually updated, users should make sure that they
use the very latest version.
Downloads are available from: http://drapertools.com/manuals
Draper Tools Limited
Hursley Road
Chandler’s Ford
Eastleigh
Hampshire
SO53 1YF
UK
Website: drapertools.com
Product Helpline: +44 (0) 23 8049 4344
General Fax: +44 (0) 23 8026 0784
1.3 UNDERSTANDING THIS MANUALS SAFETY CONTENT:
WARNING! – Information that draws attention to the risk of injury or death.
CAUTION! – Information that draws attention to the risk of damage to the
product or surroundings.
1.4 COPYRIGHT © NOTICE:
Copyright © Draper Tools Limited.
Permission is granted to reproduce this publication for personal and educational
use only. Commercial copying, redistribution, hiring or lending is prohibited.
No part of this publication may be stored in a retrieval system or transmitted in
any other form or means without written permission from Draper Tools Limited.
In all cases this copyright notice must remain intact.
2. CONTENTS
2.1 CONTENTS
1. TITLE PAGE
1.1 INTRODUCTION..........................................................................................................1
1.2 REVISION HISTORY ..................................................................................................2
1.3 UNDERSTANDING THIS MANUAL .............................................................................2
1.4 COPYRIGHT NOTICE.................................................................................................. 2
2. CONTENTS
2.1 CONTENTS.................................................................................................................. 3
3. GUARANTEE
3.1 GUARANTEE ............................................................................................................... 4
4. INTRODUCTION
4.1 SCOPE.........................................................................................................................5
4.2 SPECIFICATION..........................................................................................................5
4.3 HANDLING AND STORAGE ........................................................................................ 5
5. HEALTH AND SAFETY INFORMATION
5.1 GENERAL SAFETY INSTRUCTIONS
– 1) Work area safety.................................................................................................. 6
– 2) Electrical safety...................................................................................................6
– 3) Personal safety.................................................................................................6-7
– 4) Power tool use and care.....................................................................................7
– 5) Service .................................................................................................................7
5.2 ADDITIONAL SAFETY INSTRUCTIONS
6. TECHNICAL DESCRIPTION
6.1 IDENTIFICATION.........................................................................................................8
7. UNPACKING AND CHECKING
7.1 PACKAGING ................................................................................................................ 9
8. OPERATION AND USE
8.1 POWER SUPPLY.......................................................................................................10
8.2 WIRING THE LAMP ................................................................................................... 10
8.3 MOUNTING THE LAMP............................................................................................. 10
9. MAINTENANCE
9.1 MAINTENANCE ......................................................................................................... 11
10. EXPLANATION OF SYMBOLS
10.1 EXPLANATION OF SYMBOLS..................................................................................12
11. DISPOSAL
11.1 DISPOSAL..................................................................................................................13
DECLARATION OF CONFORMITY .............................................................................. ENCLOSED
- 3 -
3. GUARANTEE
3.1 GUARANTEE
Draper tools have been carefully tested and inspected before shipment and are guaranteed to be
free from defective materials and workmanship.
Should the tool develop a fault, please return the complete tool to your nearest distributor or
contact:
Draper Tools Limited, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF. England.
Telephone Sales Desk: (023) 8049 4333 or:
Product Helpline (023) 8049 4344.
A proof of purchase must be provided.
If upon inspection it is found that the fault occurring is due to defective materials or workmanship,
repairs will be carried out free of charge. This guarantee period covering parts/labour is 12 months
from the date of purchase except where tools are hired out when the guarantee period is 90 days
from the date of purchase. The guarantee is extended to 24 months for parts only. This guarantee
does not apply to normal wear and tear, nor does it cover any damage caused by misuse, careless
or unsafe handling, alterations, accidents, or repairs attempted or made by any personnel other
than the authorised Draper warranty repair agent.
Note: If the tool is found not to be within the terms of warranty, repairs and carriage charges will be
quoted and made accordingly.
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its
terms are not authorised.
Your Draper guarantee is not effective unless you can produce upon request a dated receipt or
invoice to verify your proof of purchase within the guarantee period.
Please note that this guarantee is an additional benefit and does not affect your statutory rights.
Draper Tools Limited.
- 4 -
4. INTRODUCTION
4.1 SCOPE
Die cast aluminium housing with wall bracket using a ultra bright Chip On Board (COB) LED which
produces low heat and an even spread of 120° light and is suitable for outside locations.
4.2 SPECIFICATION
Stock no..................................... 66036.............................66037 .............................66038
Part no..............................WMCL10W/PIR/B ......... WMCL20W/PIR/B.......... WMCL30W/PIR/B
Rated voltage ........................ 230V/50Hz .....................230V/50Hz .....................230V/50Hz
LED............................................. COB............................... COB ...............................COB
Wattage ...................................... 10W ...............................20W................................30W
Lumens........................................ 700................................ 1300 ...............................1950
Colour Temperature................... 4000K.............................4000K ............................ 4000K
Ingress protection....................... IP65 ...............................IP65................................ IP65
Product size........................ 110x85x85mm .............210x170x140mm ............ 225x85x150mm
4.3 HANDLING AND STORAGE
Take care when using this product.
– If any part is worn or damaged, do not use.
– Do not point (shine) the light into any persons or animals eyes.
– Do not submerge in liquids.
– Keep away from children.
- 5 -
Loading...