
1. General Information
Ensure these ear defenders are tted, adjusted and maintained in accordance with these
instructions, and regularly inspected for serviceability. Ear defenders should be worn at all times
in noisysurroundings.
Important: The tting of hygiene covers to the cushions may aect the acoustic performance
of the ear defenders. Glasses and hair trapped between the cushions and the ear may also
aectperformance.
2. Fitting and Adjustment
Position the ear defender cups at the bottom of the slots in the headband. Fit the cups over the
ears with a vertical orientation and slide the headband down until it touches the top of the head.
The headband may need to be tightened during prolongeduse.
3. Maintenance and Storage
This product should oer adequate protection for two to three years. During transportation or
when not in use, store the product in a container out of direct sunlight, away from chemicals and
abrasive substances, and so that it cannot be damaged by hard surfaces. Clean the cushions
with warm soapy water after use; do not use solvents or abrasive cleaners. Ear defenders, and in
particular cushions, may deteriorate with use and should be examined at frequent intervals for
cracking and leakage, for example. Quote the stock number when ordering; tting instructions
are supplied with replacementparts.
Important: If an allergic reaction occurs from skin contact with this product, move to a quieter
area and remove the eardefenders.
4. Explanation of Symbols
SNR
26dB
Helpline: +44 (0) 23 8049 4344 Sales Desk: +44 (0) 23 8049 4333 General Enquiries: +44 (0) 23 8026 6355
Draper Tools Limited
UK: Hursley Road, Chandler’s Ford, Eastleigh, Hampshire, SO53 1YF, UK
EU: Oude Graaf 8, 6002 NL, Weert, Netherlands
BSI Assurance UK Ltd.
Kitemark Court, Davy Avenue, Knowlhill, Milton Keynes, MK5 8PP, United Kingdom
BSI Group The Netherlands B.V.
Say Building, John M. Keynesplein 9, 1066 EP, Amsterdam, Netherlands 0522
Single Number Rating
(protection level)
UKCA – UK Conformity Assessed
Website: drapertools.com Email: sales@drapertools.com
CE – European Conformity