OIL
SUCTION
GUN
47812
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE
SAFE AND EFFECTIVE USE OF THIS PRODUCT.
INSTRUCTIONS
These instructions accompanying the product are the original instructions. This document is part of the product,
keep it for the life of the product passing it on to any subsequent holder of the product. Read all these
instructions before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been
designed, and contains all the necessary information to ensure its correct and safe use. By following all the
general safety instructions contained in this manual, it will ensure both product and operator safety, together
with longer life of the product itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper
Tools policy of continuous improvement determines the right to make modifications without prior warning.
1. INTRODUCTION
1.1 SCOPE
A rugged transfer gun designed for use with gear oils to get them both into and out of gear boxes,
transfer cases and differentials.
1.2 SPECIFICATION
Stock No’s. ...............................................................................................................................47812
Part No’s. .................................................................................................................................. A5/G
Hose type ...................................................................................................................... 300mm PVC
Plunger type .......................................................................................................................... Rubber
Handle style............................................................................................................................... T grip
Capacity ........................................................................................................................ 500ml (16oz)
Do not use with: ........................................................................................ Gasoline or Diesel fuel
2. TECHNICAL DESCRIPTION
2.1 IDENTIFICATION
300mm PVC Hose
Barrel.
End cap.
T-handle.
3. ASSEMBLY
3.1 ASSEMBLY
• Attach the PVC hose to the end of the suction gun, Slide the flexible tube onto the hose fitting.
• A light coating of motor oil may be used as a lubricant if the joint is extremely tight.
- 2 - - 3 -
Loading...