TORQUE
WRENCH
34570
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE
SAFE AND EFFECTIVE USE OF THIS PRODUCT.
INSTRUCTIONS
These instructions accompanying the product are the original instructions. This document is part of the product, keep
it for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before
assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed,
and contains all the necessary information to ensure its correct and safe use. By following all the general safety
instructions contained in this manual, it will ensure both product and operator safety, together with longer life of the
product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools
policy of continuous improvement determines the right to make modifications without prior warning.
1. TITLE PAGE
1.1 INTRODUCTION:
USER MANUAL FOR: Torque Wrench
Stock No: 34570
Part No: 3004A
1.2 REVISIONS:
Date first published July 2019.
As our user manuals are continually updated, users should make sure that they use
the very latest version.
Downloads are available from: http://drapertools.com/manuals
Draper Tools Limited
Hursley Road
Chandler’s Ford
Eastleigh
Hampshire
SO53 1YF
UK
Website: drapertools.com
Product Helpline: +44 (0) 23 8049 4344
General Fax: +44 (0) 23 8026 0784
1.3 UNDERSTANDING THIS MANUALS SAFETY CONTENT:
WARNING! – Information that draws attention to the risk of injury or death.
CAUTION! – Information that draws attention to the risk of damage to the product or
surroundings.
1.4 COPYRIGHT © NOTICE:
Copyright © Draper Tools Limited.
Permission is granted to reproduce this publication for personal and educational use
only. Commercial copying, redistribution, hiring or lending is prohibited.
No part of this publication may be stored in a retrieval system or transmitted in any
other form or means without written permission from Draper Tools Limited.
In all cases this copyright notice must remain intact.
2. CONTENTS
1. TITLE PAGE
1.1 INTRODUCTION ..............................................................................................................2
1.2 REVISION HISTORY .......................................................................................................2
1.3 UNDERSTANDING THIS MANUAL .................................................................................2
1.4 COPYRIGHT NOTICE...................................................................................................... 2
2. CONTENTS
2.1 CONTENTS......................................................................................................................3
3. WARRANTY
3.1 WARRANTY..................................................................................................................... 4
4. INTRODUCTION
4.1 SCOPE .............................................................................................................................5
4.2 SPECIFICATION ..............................................................................................................5
4.3 HANDLING & STORAGE ................................................................................................. 5
5. HEALTH AND SAFETY INFORMATION ..................................................................................6
6. TECHNICAL DESCRIPTION
6.1 IDENTIFICATION .............................................................................................................7
7. UNPACKING AND CHECKING
7.1 PACKAGING.....................................................................................................................8
8. OPERATING INSTRUCTIONS
8.1 OPERATING INSTRUCTIONS – FIG. 1........................................................................... 9
8.2 GETTING TO KNOW YOUR TORQUE WRENCH...................................................10–12
9. CONVERSION CHART...........................................................................................................13
3
3. WARRANTY
3.1 WARRANTY
Draper tools have been carefully tested and inspected before shipment and are guaranteed to be
free from defective materials and workmanship.
Should the tool develop a fault, please return the complete tool to your nearest distributor or
contact:
Draper Tools Limited, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF. England.
Telephone Sales Desk: (023) 8049 4333 or:
Product Helpline (023) 8049 4344.
A proof of purchase must be provided.
If upon inspection it is found that the fault occurring is due to defective materials or workmanship,
repairs will be carried out free of charge. This warranty period covering labour is 12 months from
the date of purchase except where tools are hired out when the warranty period is 90 days from
the date of purchase. The warranty is extended to 24 months from the date of purchase for parts
only. This warranty does not apply to any consumable parts, any type of battery or normal wear
and tear, nor does it cover any damage caused by misuse, careless or unsafe handling,
alterations, accidents, or repairs attempted or made by any personnel other than the authorised
Draper warranty repair agent.
Note: If the tool is found not to be within the terms of warranty, repairs and carriage charges will
be quoted and made accordingly.
This warranty applies in lieu of any other warranty expressed or implied and variations of its terms
are not authorised.
Your Draper warranty is not effective unless you can produce upon request a dated receipt or
invoice to verify your proof of purchase within the warranty period.
Please note that this warranty is an additional benefit and does not affect your statutory rights.
Draper Tools Limited.
4
4. INTRODUCTION
4.1 SCOPE
This torque wrench is used to apply a specific torque to a fastener such as a nut or bolt.
Any application other than that it was designed for is considered misuse.
4.2 SPECIFICATION
Stock no. .................................................................................................................................34570
Part no. ...................................................................................................................................3004A
Torque range ..................................................................................................................... 10-80Nm
................................................................................................................................... 88.5-708in/lbs
Accuracy ................................................................................................................................ +/- 4%
Square drive size ....................................................................................................................... 3/8"
Overall length approx ...........................................................................................................280mm
Manufactured and tested in accordance with to ISO 6789-2003 Standards.
Whilst every effort has been made to ensure that the accuracy of information given in this manual
is correct at time of going to print, the Draper Tools policy of continuous improvement determines
the right to change specification without notice.
This torque wrench is accurate to ± 4% of the set load and has been manufactured and tested in
accordance to ISO 6789-2003.
Torque tools are classified as test devices. If a calibration routine is required, the calibration
interval shall be chosen on the basis of the factors of operation such as required accuracy,
frequency of use, typical load during operation as well as ambient conditions during operation and
storage conditions. The interval should be decided according to the user's procedures for the
control of test devices and by the requirements of the user.
If the user does not use a control procedure, a period of use of 12 months, or approximately 5000
cycles can be taken as a default value of the recalibration interval. For the first recalibration,
the period of validity starts with user's first operation of the torque tool.
In addition to these specifications, factory or legal regulations shall be observed.
The torque tool shall be recalibrated when it has been subjected to an overload greater than 125%
of maximum rated load and after repair, or after any improper handling which might influence any
errors in measurement.
4.3 HANDLING & STORAGE
Ensure you have a good stable position whilst using this product. Care should be exercised when
using this product due to rotating parts etc.
Store the product together with this manual in its protective case in a cool dry place with the torque
wrench set to its minimum setting.
This product should be cleaned, maintained and lubricated regularly to ensure it is operating at
peak performance.
5
Loading...