25 & 50 LITRE
COMPRESSORS
• INSTRUCTIONS •
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO
ENSURE THE SAFE AND EFFECTIVE USE OF THIS TOOL.
STOCK No. PART No.
52624 DA25/201
55274 DA25/230
33825 DA25/250
52625 DA50/201
55275 DA50/230
33826 DA50/250
04/2000
- 2 -
25 & 50 LITRE COMPRESSORS
■ STOCK No.52624, 55274, 33825, 52625, 55275, 33826.
■ PART Nos. DA25/201, DA25/230, DA25/250, DA50/201, DA50/230, DA50/250.
Whilst every effort has been made to ensure accuracy of information given in this manual is correct at the
time of going to print, the Draper Tools policy of continuous improvement determines the right to change
specification without notice.
CONTENTS: Page Nos.
Specification / Guarantee................................................................................................................... 3
Safety Warning ................................................................................................................................... 4
General Safety Warning for Air Compressors and Tools .................................................................... 4
Power Supply ..................................................................................................................................... 5
Know Your Air Compressor ................................................................................................................ 6
Operation........................................................................................................................................... 6-7
Operation Cont’d................................................................................................................................ 7
Maintenance....................................................................................................................................... 7
Maintenance Cont’d ........................................................................................................................... 8
Optional Accessories ........................................................................................................................ 9
Trouble Shooting Guide .................................................................................................................... 10
We
Draper Tools Ltd. Hursley Road, Chandlers Ford, Eastleigh, Hampshire. SO53 1YF. England.
Declare under our sole responsibility that the product:
Stock No. 52624, 55274, 33825, 52625, 55275 & 33826.
Part No. DA25/201, DA25/230, DA25/250, DA50/201, DA50/230 & DA50/250.
Description:- Compressors 25 & 50 Litre.
To which this declaration relates is in conformity with the following directive(s)
89/392EEC, 87/404EEC & 89/336EEC.
With reference to:
EN 292-2, IEC 34-1, EN 60335-1 & EN 60204-1.
JOHN DRAPER
Managing Director
DECLARATION OF CONFORMITY
Stock No. 52624 55274 33825 52625 55275 33826
Part No. DA25/201 DA25/230 DA25/250 DA50/201 DA50/230 DA50/250
Air displacement 195L/min (6.9cfm) 230L/min (8.2cfm) 250L/min (8.3cfm) 195L/min (6.9cfm) 230L/min (8.2cfm) 250L/min (8.8cfm)
Free air delivered (FAD) 125L/min (4.2cfm) 160L/min (5.7cfm) 150L/min (5.3cfm) 125L/min (4.2cfm) 160L/min (5.7cfm) 150L/min (5.3cfm)
Motor 1.5HP. 230V. 2HP. 230V. 2HP. 230V. 1.5HP. 230V. 2HP. 230V. 2HP. 230V.
Speed 2800rpm 2850rpm 2800rpm 2800rpm 2850rpm 2800rpm
Maximum pressure 116 PSI (8 bar) 116 PSI (8 bar) 116PSI (8 bar) 116 PSI (8 bar) 116 PSI (8 bar) 116 PSI (8 bar)
Number of cylinders 111111
Receiver capacity 25 litres 25 litres 25 litres 50 litres 50 litres 50 litres
Weight 26kg 25kg 27kg 36kg 39kg 37kg
Draper compressors have been carefully tested and inspected before shipment and are guaranteed to be
free from defective materials and workmanship for a period of 12 months from the date of purchase
except where tools are hired out when the guarantee period is ninety days from the date of purchase.
Should the compressor develop any fault, please return the complete tool to your nearest authorized
warranty repair agent or contact Draper Tools Limited, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF.
England. Telephone: (023) 8026 6355.
If upon inspection it is found that the fault occurring is due to defective materials or workmanship, repairs
will be carried out free of charge. This guarantee does not apply to normal wear and tear, nor does it
cover any damage caused by misuse, careless or unsafe handling, alterations, accident, or repairs
attempted or made by any personnel other than the authorized Draper warranty repair agent.
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are
not authorized.
Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to
verify your proof of purchase within the 12 month period.
Please note that this guarantee is an additional benefit and does not affect your statutory rights.
Draper Tools Limited
SPECIFICATION
- 3 -
GUARANTEE
The typical sound pressure level of this machine is 77db(A).
The noise level whilst working, could exceed 85db(A) - WEAR EAR PROTECTION.
SAFETY WARNING
WARNING:
Please read the following instructions carefully. Failure to do so could lead to serious personal injury.
IMPORTANT:
Draper Tools recommends that this compressor should not be modified or used for any application other
than that for which it was designed. If you are unsure of it’s relative applications do not hesitate to contact
us in writing and we will advise you.
GENERAL SAFETY RULES FOR
AIR COMPRESSORS AND TOOLS
1. KNOW YOUR COMPRESSOR
Before operating the compressor, read and
fully understand the starting, operating and
stopping sections in this manual. Read all
labels affixed to the compressor. Learn it’s
applications and limitations.
2. SERVICING AND MAINTENANCE
Do not service or maintain this compressor
until you have read and understood the
maintenance section of this manual.
3. CHECK DAMAGED PARTS
Before further use of this compressor a guard
or other part that is damaged should be
carefully checked to ensure that it will operate
correctly and perform its intended function.
Check for alignment of moving parts,
breakage of parts and any other conditions
that may effect its operation. A guard or other
part that is damaged should be properly
repaired or replaced.
4. DISCONNECT FROM POWER SUPPLY
Before servicing, maintaining or replacing
damaged parts ALWAYS disconnect the
compressor from the power supply.
5. EARTH
This compressor is equipped with an
approved 3-core power cable.The green and
yellow conductor in the core is the earth wire.
NEVER connect the yellow and green wire to a
live terminals.
6. AVOID DANGEROUS ENVIRONMENTS
Do not use the compressor is damp or wet
locations or expose it to rain. Keep the work
area well lit. Provide adequate surrounding
work space.
*Not suitable for building sites.
7. KEEP GUARDS IN PLACE
8. AVOID ACCIDENTAL STARTING
Make sure the power supply switch is off
before connecting to the power supply.
9. KEEP CHILDREN AWAY AND MAKE
WORKSHOP CHILDPROOF
All visitors should be kept a safe distance
from the work area. The power tools and
workshop should be made childproof with
padlocks, master switches or by removing
starter keys.
10. NEVER LEAVE THE COMPRESSOR
RUNNING UNATTENDED
Turn the power supply off. Do not leave the
compressor until it comes to a complete stop.
11. DO NOT OVERLOAD THE COMPRESSOR
Before operating any air tool check that
the free air delivery (FAD) from the air
compressor is equal or greater than that of the
air tool to be used. NOTE: the compressor
should not start more than nine times in one
hour.
12. AIR PRESSURE
Always check that the air supply pressure is
equal to or less than the air tool
manufacturers maximum operating pressure.
13. USE SAFETY GOGGLES/MASK
Wear safety goggles (which comply to a
recognized standard) at all times. Normal
spectacles only have impact resistant lenses,
they are NOT safety glasses. Also use a face
mask if a cutting operating is dusty or if
spraying paint or other toxic substances.
14. USE RECOMMENDED ACCESSORIES
For a complete range of recommended
accessories please refer to page 9 of this
manual.
- 4 -
Loading...