Installing Back Panel /
Wall Cabinet with Wall
Brackets (Single & Double)
To make assembly easier we recommend having two persons aid one another in assembly.
Stock No.
33196 / 33162
STEP 1:
Attach wall bracket (single and double) to cabinet
with bolt M8 x16mm, washer 18 x 8 x 1mm and spring
washer 14 x 8.8 x 2.6mm, and tighten with wrench
(not included).
STEP 2:
Attach back panel to wall bracket (single and double)
with bolt M6 x 16mm, nut M6 and spring washer
12 x 6.5 x 0.8mm, and tighten with wrench
(not included).
STEP 3:
Attach wall cabinet to wall bracket (single and double) with bolt M8 x 16mm, at washer 8 x 8 x 1mm
and spring washer 14 x 8.8 x 2.6mm, and tighten with wrench (not included)
STEP 4:
Connect the side panels of two cabinets with M6 x 16mm and nut M6, and tighten with wrench (not included).
CABINET CONNECTION
Connect the side panels of two cabinets
with (4) bolt M6 x 16mm and nut M6,
and tighten with wrench (not included).
Note: remove the drawers and open the
doors before cabinet connection.
tall cabinet
drapertools.com
Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire. SO53 1YF UK.
wall cabinet
floor cabinet
Loading...