To make assembly easier we recommend having two
persons aid one another in assembly.
Item Description Quantity
Preparing 2 Door
Tall Cabinet
Stock No.
33166
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Top Panel 1
Bottom Panel 1
Left Side Panel 1
Right Side Panel 1
Left Back Panel 1
Right Back Panel 1
Left Door 1
Right Door 1
Front Kick Panel 1
Side Kick Panel 2
Shelf Panel 4
Foot Holder 4
Leg Leveller 4
M8 x 16mm bolt 16
15
1
6
4
11
2
10
13
16
5
3
7
9
14
8
12
15
16
M6 x 16mm bolt 12
12 x 7 x 5mm
Flat Washer
CABINET CONNECTION
Connect the side panels of two cabinets
with (4) bolt M6 x 16mm and nut M6,
and tighten with phillips screwdriver
(not included).
Note: remove the drawers and open the
doors before cabinet connection.
1
STEP 1:
Place the left back panel
(item 5)
and right back panel
(item 6) together
on a level surface.
Attach right back
panel to left back
panel by engaging the
holes on the left back panels
with the corresponding hooks
on right back panel.
STEP 2:
Attach left and right back panels to left and right side panels
(item 3 and 4) by engaging the holes on the side panels with the
corresponding hooks on back panels.
STEP 5:
Use packaging material to protect the unit. Attach the leg leveller
(item 13) to foot holder (item 12). Insert bolt
M8 x 16mm (item 14) through the foot holder into the cabinet.
STEP 6:
Attach the front and side kick panel (item 9 and 10) to foot
holder with bolt M6 x 16mm (item 15).
STEP 7:
Obliquely place the four shelf panels
(item 11) in the cabinet, secure the
shlef panels at four desired heights
by carefully inserting the shelf edges
into the anges on left and right side
panels. Make sure each shelf is level.
STEP 3:
Insert the top panel (item 1)
into the side and back panels. Lay
the cabinet at on the ground if
necessary.
STEP 8:
Place the at washer (item 16) into the hinge pin, algin the hinge
pin on the bottom of the door with the hole on bottom panel,
slowly and carefully insert the hinge pin into the hole. Algin the
hinge pin on the top of the door with the hole on top panel, slowly
and carefully insert the hinge pin into the hole.Repeat the step
above to complete the right door assembly.
STEP 4:
Insert the bottom panel
(item 2) into the side and back
panels. Lay the cabinet at on the
ground if necessary.
drapertools.com
Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire. SO53 1YF UK.
Loading...