Norman is a real person and is our expert head
of Quality Assurance. Norman appears here to
bring to your attention features, technical or
quality issues.
More importantly the reasons why, on
occasions, it's worth paying a little more for a
product that may look similar to a cheaper
alternative but is much better.
norman says
HACKSAW BLADES
Choosing hacksaw blades:
Always use the blades that
have as many teeth as possible
in contact with material e.g.
angle iron = 32TPI,
square section = 18TPI
Blade teeth should always point
forward, or as shown by the chevrons on the blades.
Our Bi-metal blades combine the longevity of HSS
and the flexibility of carbon steel.
HACKSAW BLADE TEETH SHOULD ALWAYS POINT
FORWARD - LOOK FOR THE DIRECTION OF THE
CHEVRONS ON OUR BLADES
Loading...