Draper Tools 28111, 28106 Instructions

Original Instructions

Version 1 – May 2022

USER
INFORMATION

Stock N o. 28106 /28111 Part N o. TK58/BL
TK58/GR

EN

Read this manual in full before attempting
to use this product and retain it for future
use. Always use the latest version of
the manual.

1. Voltage Tester

1.1 Scope

This product is designed to test the
voltage at a given point in a circuit and
to locate breakages in cables. Any other
application is considered misuse. Draper
Tools accepts no responsibility for
improper use of this product.

Voltage testing range: 12–250V AC/DC

1.2 Safety Information

WARNING! Working with electricity is
dangerous. Always consult a suitably

qualied person if you are not certain

of what you are doing. NEVER touch
the metal blade during use.

Important: This product is NOT

a screwdriver. Using it as such is
dangerous and may cause damage to
the user or tool.

1.3 Operating Instructions

Voltage Test

Place the blade into or onto a “live”
aperture or contact and press and
hold the “Direct Test” button. An
approximation of the voltage is
indicated on the LCD display.

Induction Test

To nd a broken cable, ensure that
the supply is live, press and hold the

“Induction Break-Point Test” button and
track the blade from the plug towards
the appliance. A lightning symbol is
shown on the LCD display until a break

is detected. Repeat the test to conrm

the location.

1.4 Disposal

Dispose of this tool in accordance with
local regulations.

• DO NOT dispose of this tool with
domestic waste.

• DO NOT dispose of this tool in
unsorted municipal waste.

• DO NOT incinerate.

• DO NOT abandon in the environment.

2. Snap-OKnife

2.1 Health and Safety Information

WARNING! The blade in this product
is very sharp. Do not extend the blade
more than two segments. Fully retract
the blade when it is not in use.

Important: ALWAYS wear safety

goggles during use. Excessive pressure

can cause segments to break o

unintentionally. Remove blade segments
when they become blunted or worn.

2.2 Operation Instructions

Use the tab to extend and retract the
blade as necessary.

To remove blunt segments, squeeze

and slide the black removal tool away
from the end of the knife body. Extend
the blade so that the blunt segment
is clear of the guard and insert the tip
into the removal tool. Use the removal

tool to snap the segment o the blade.
Alternatively, use pliers or another
suitable gripping tool to snap o

the blade.

Important: ALWAYS snap the blade
away from you.

3. Explanationofsymbols

Metric sizing

MM

Cr

Chrome vanadium steel

V

1/4” hex drive

1/4"

Do not incinerate or throw

onto re

Do not abandon in the
environment

– WEEE –
Waste Electrical & Electronic

Equipment

Do not dispose of this product with
domestic waste

UK Conformity Assessed

European Conformity

Helpline: [phone] Sales Desk: [phone]

General Enquiries: [phone] Website: drapertools.com

Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire, SO53 1YF, UK

Email: [e-mail]