This document is part of the product, keep it for the life of the product passing it on to any subsequent holder of
the product. Read all information before operating product.
This guide has been compiled by Draper Tools describing the purpose for which the product has been designed,
and contains necessary information to ensure its correct and safe use. By following the information contained in
this guide, it will ensure both product and operator safety, together with longer life of the product itself.
AlI photographs and drawings in this guide are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this guide, the Draper
Tools policy of continuous improvement determines the right to make modifications without prior warning.
1. TITLE PAGE
1.1 INTRODUCTION:
USER GUIDE FOR: Flywheel & Front Pulley Locking Tool Set
Stock No: 27111
Part No: ETK219
1.2 REVISIONS:
Date first published June 2018.
As our user manuals are continually updated, users should make sure that they use
the very latest version.
Downloads are available from: http://drapertools.com
Draper Tools Limited
Hursley Road
Chandler’s Ford
Eastleigh
Hampshire
SO53 1YF
UK
WARNING! – Information that draws attention to the risk of injury or death.
CAUTION! – Information that draws attention to the risk of damage to the product or
only. Commercial copying, redistribution, hiring or lending is prohibited.
No part of this publication may be stored in a retrieval system or transmitted in any
other form or means without written permission from Draper Tools Limited.
In all cases this copyright notice must remain intact.
A proof of purchase must be provided.
If upon inspection it is found that the fault occurring is due to defective materials or workmanship,
repairs will be carried out free of charge. This guarantee period covering parts/labour is 12 months
from the date of purchase except where tools are hired out when the guarantee period is 90 days
from the date of purchase. This guarantee does not apply to normal wear and tear, nor does it
cover any damage caused by misuse, careless or unsafe handling, alterations, accidents, or
repairs attempted or made by any personnel other than the authorised Draper warranty repair
agent.
Note: If the tool is found not to be within the terms of warranty, repairs and carriage charges will be
quoted and made accordingly.
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its
terms are not authorised.
Your Draper guarantee is not effective unless you can produce upon request a dated receipt or
invoice to verify your proof of purchase within the guarantee period.
Please note that this guarantee is an additional benefit and does not affect your statutory rights.
Draper Tools Limited.
- 4 -
4. GENERAL PRODUCT INFORMATION
This product is designed to be used correctly and with care for the purpose for which it is intended.
No liability is accepted by Draper Tools Limited for incorrect use or application of any of our
products, and Draper Tools Limited cannot be held responsible for any damage to personnel,
property or equipment when using this product. Incorrect use will also invalidate any warranty.
The applications database and any instructional information provided has been designed to offer
general guidance for a particular product’s use and while all attention is given to the accuracy of
the data, no project should be attempted without referring first to the manufacturer’s technical
documentation (workshop or instruction manual) or the use of a recognised authority such as
Autodata.
It is our policy to continually improve our products and thus we reserve the right to alter
specifications and components without prior notice. It is the responsibility of the user to ensure the
suitability of the product and information prior to use.
- 5 -
5. HEALTH AND SAFETY INFORMATION
GENERAL SAFETY INSTRUCTIONS
Warning: Please read all safety warnings and all details carefully. Failure to follow the warnings
may result in serious injury or major component damage.
Important: Draper Tools recommends that this product should not be modified or used for any
application other than that for which it was designed.
Save all warnings and instructions for future reference.
1) Personal safety
a) Stay alert, watch what you are doing and use common sense when using this product.
Do not use this product while you are tired or under the influence of drugs, alcohol or any
medication. A moment of inattention while using this product may result in serious personal
injury.
b) Use personal protective equipment as necessary.
c) Check and remove any part of the product before turning/testing the engine. A part left
attached to a rotating part of the engine may result in personal injury or major component
damage.
d) Carefully clean the tool components after every use.
f) Keep the tool components safe and tidy.
g) Do not use this product for any purpose other than for which it is designed.
Warning! Some of the packaging materials used may be harmful to children. Do not leave any of
these materials in the reach of children.
If any of the packaging is to be thrown away, make sure it is disposed of correctly; according to
local regulations.
- 6 -
6. CONTENTS
AB
C
D
ITEM DESCRIPTION OEM STOCK No.
A Flywheel Locking Tool MOT 919-02 34606
B Flywheel Locking Tool MOT.1431 34611
C Cover Joint Separator Tool MOT1716 34638
MOT.2019
D Crankshaft Pulley Holding Tool
MOT.1789
- 7 -
34645
7. APPLICATION
The 27111 has been developed as a flywheel and front pulley locking tool set for the vehicles
listed below. Designed as a flywheel and front pulley locking tool for Renault and Nissan engines.
The kit also contains the essential cover joint separator tool.
Used on the following Vehicles:
Renault Clio 2006 - 2016 Renaultsport 220 Trophy
Renault Espace V 2015 - 2016 TCe 130
Renault Espace/Grand Espace IV 2002 - 2015 dCi
Renault Fluence 2009 - 2015 TCe
Renault Koleos 2008 - 2016 Renaultsport dCi 175
Renault Laguna 2005 - 2015 16V
Renault Latitude 2010 - 2016 Flex-Fuel 16V
Renault Master III 2010 - 2016
Renault Megane 2006 - 2015 Bio-Ethanol
Renault Scenic/Grand Scenic 2006 - 2015 16V E85
Renault Trafic II 2007 - 2015 GT dCi
Renault Vel Satis 2000 - 2010 CDTi
Nissan NP300 Navara 2015 - 2016
Nissan NV400 2011 - 2016
Nissan Primastar 2006 - 2015
Nissan Qashqai/Qashqai+2 2007 - 2014
Nissan X-Trail 2007 - 2014
The following is for guidance only. Please refer to OEM derived data such as the vehicle
manufacturer’s own data or Autodata. The use of this product is purely down to the user’s
discretion and Draper Tools Limited cannot be held responsible for any damage caused what so
ever.
- 9 -
9. PROCEDURE AND APPLICATION GUIDE
Depending on manufacture and model, some engine components do change. Please check with
Autodata or the manufacturer’s data before use.
A & B = Flywheel locking tool assembly
Components A & B are both flywheel locking tools designed to bolt on to the engine to lock
the crankshaft by locking the flywheel via the ring gear teeth. Both components are used as
shown with the engine and transmission removed:
C = Cover/Sump/joint separator tool
Component (C) is used to separate the timing cover from the engine casing once the bolts
are removed. Component (C) is used as a lever and scraper to remove any sealant
residue. Assemble (C) as shown. Use assembled tool to separate the cam chain casing as
shown after removing fixing bolts.
D = Crankshaft pulley holding tool
Component D is used to hold the front engine pulley while loosening and tightening the
pulley fixing bolt. Component D is a combination tool that is equivalent to 2 OEM Renault
tools (MOT.2019 & MOT.1789) thanks to its adjustable locking boss.
Please note images are for guidance only and subject to change.
Service/Warranty Repair Agent:
For aftersales servicing or warranty repairs, please contact the
Draper Tools Helpline for details of an agent in your local area.