1. SPECIFICATION
The Draper Tools policy of continuous improvement determines the right to change specification
without notice.
STOCK NO. ............................................................................................................................ 22494
PART NO. ............................................................................................................................... DPW3
RATED VOLTAGE ...................................................................................................... 230V ~ 50HZ
CAPACITY ........................................................................................................................... 9 LITRE
DIMENSIONS (L × W × D) .............................................................................. 460 X 665 X 260MM
WEIGHT (EMPTY) ....................................................................................................................5KG
2. SAFETY INSTRUCTIONS
Never over fill the Parts Washer. The level of the cleaning solution should be just below
the parts tray.
Do not use flammable liquids such as petrol. Use only recommended water based
cleaning solution.
Use in a well ventilated area as some cleaning solution fumes may be toxic.
Do not smoke, operate near a naked flame, or machinery which may generate sparks.
Avoid cleaning solution contact with skin and eyes, always wear protective clothing which
conforms to a recognised standard when necessary.
Note: Never modify or jam the lid in an open position.
3. CONNECTION TO THE POWER SUPPLY
Make sure the power supply information on the machine’s rating plate are compatible with the
power supply you intend to connect it to.
The fan comes supplied with a UK standard 3 pin plug fitted. It is designed for connection to a
domestic power supply rated at 230V AC.
Because it is constructed mostly of plastic parts, it is a Class 2 machine; meaning, it is double
insulated
Apart from replacing the fuse in the plug, no other electrical work is recommended on this
parts washer.
. This is to prevent electrocution in the event of a failure.
6. DECLARATION OF CONFORMITY
J.N. Draper, Chairman 28/06/2012
Loading...