Draper Tools 19406, 20046 Instructions

ORIGINAL LANGUAGE



AIR MOVER

VENTIL ATOR

19406, 20046.

Stock No. 19406 shown

These instructions accompanying the product are the original instructions. This document is part of the product,
keep it for the life of the product passing it on to any subsequent holder of the product. Read all these instructions
before assembling, operating or maintaining this product.

This manual has been compiled by Draper Tools describing the purpose for which the product has been designed,
and contains all the necessary information to ensure its correct and safe use. By following all the general safety
instructions contained in this manual, it will ensure both product and operator safety, together with longer life of the
product itself.

All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.

Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper
Tools policy of continuous improvement determines the right to make modifications without prior warning.

1. INTRODUCTION

1.1 SCOPE

Ideal for use where high-volume air delivery is required.
Suitable for use in automotive, commercial, industrial
and agricultural environments when in confined, hot or
fume laden spaces. Stale air is rapidly extracted to
provide a cleaner more pleasant working environment.

Part of our core range, this product is suitable for
enthusiasts and tradespersons alike. Any application
other than that it was intended for, is considered misuse.

Local regulations may restrict the age of the operator.

1.2 UNDERSTANDING THIS MANUALS
SAFETY CONTENT:

Warning! – Information that draws attention to the

risk of injury or death.

Caution! – Information that draws attention to the risk of
damage to the product or surroundings.

1.3 EXPLANATION OF SYMBOLS

Before plugging in your tool, make sure the socket
voltage matches that on the product plate. If the socket
voltage does not match that shown on the type plate, it
can result in a serious hazard and damage to your tool.

Important: Read instruction manuals

before operating and servicing this
equipment.

For indoor use.
Do not expose to rain.

UK Conformity Assessed.

European conformity.

2. SPECIFICATION

2.1 SPECIFICATION

Stock No. .............................................................. 19406

Part No. ................................................................ AMV8

Rated voltage .................................................. 230~50Hz

Rated input .............................................................180W

Fan diameter Ø ............................................. 8" (200mm)

Air flow (high) ...............................................15.56m3/min

Noise level (max) .................................................78dB(A)

Weight (nett) .......................................................... 6.45kg

Stock No. .............................................................. 20046

Part No. .............................................................. AMV12

Rated voltage .................................................. 230~50Hz

Rated input .............................................................350W

Fan diameter Ø ........................................... 12" (300mm)

Air flow (high) ...............................................36.67m3/min

Noise level (max) .................................................88dB(A)

Weight (nett) .......................................................... 8.55kg

Rated voltage

Motor capacity (Watts).

(example of icon)

Machine weight.

(example of icon)

WEEE –
Waste Electrical & Electronic Equipment.

Do not dispose of Waste Electrical & Electronic
Equipment in with domestic rubbish.

Class 1 appliance
(Must be earthed).

Energy related Products.

3. HEALTH AND SAFETY
INFORMATION

3.1 HEALTH AND SAFETY FOR FANS

Warning! – Please read the following instructions

carefully, failure to do so could lead to serious personal
injury.

Draper Tools Ltd, recommends that this fan not be
modified or used for any application other than that for
which is was designed. If you are unsure of its relative
applications, do not hesitate to contact us in writing and
we will advise you.

• Keep out of the reach of children.

• Ensure fan is situated and used in an area free from
loose furnishings, clothing, curtains etc that could get
sucked in to the fan air inlet, or could block the fan
blades.

• Do not leave the fan running unattended.

• Ensure the fan is situated and used in an area free
from dust and ash that could be sucked up and
cause air pollution. This will also damage the motor.

• Remove the plug from the socket before carrying out
adjustment, servicing or maintenance.

– 2 –– 3

• Complete any assembly procedures prior to
connection to the power supply.

• Never insert fingers, pencils, or any other object
through the protective grille, while the fan is running.

• Disconnect the fan from the power supply when
moving it from one location to the other.

• Ensure the fan is switched off from the mains supply
before removing the grille.

• Always complete the assembly of the fan before
switching it on after cleaning.

• Always ensure the fan is secure on a firm and secure
surface before operating.

• Do not use the fan near an open window, as rain can
create an electrical hazard.

• If the power supply cable becomes damaged, it
should be replaced immediately.

• If replacement of the supply cord is necessary, this
should be carried out by the manufacturer or
appropriate agent in order to avoid a safety hazard.

• Do not use this fan with an independant externally
connected speed control device.

• Do not cover when in use.

• Do not use in the immediate surroundings of a bath,
shower or swimming pool.

3.2 CONNECTION TO THE POWER

SUPPLY

Caution: Risk of electric shock. Do not open.

This appliance is supplied with an approved plug and
cable for your safety. The value of the fuse fitted is
marked on the pin face of the plug. Should the fuse
need replacing, ensure the substitute is of the correct
rating, approved to BS1362 and ASTA or BS Kite
marked.

ASTA

BSI

Make sure the power supply information on the
machine’s rating plate are compatible with the power
supply you intend to connect it to.

If a replacement plug is to be fitted this must be carried
out by a qualified electrician.

The damaged or incomplete plug, when cut from the
cable shall be disabled to prevent connection to a live
electrical outlet.

This appliance is Class I
connection to a power supply matching that detailed on
the rating label and compatible with the plug fitted.

If an extension lead is required, use an approved and
compatible lead rated for this appliance. Follow all the
instruction supplied with the extension lead.

†

Earthed: This product requires an earth connection
to protect against electric shock from accessible
conductive parts in the event of a failure of the basic
insulation.

Important: If using an extension lead, follow the

† and is designed for

instructions that came with your lead regarding
maximum load while cable is wound. If in doubt, ensure
that the entire cable is unwound. Using a coiled
extension lead will generate heat which could melt the
lead and cause a fire.

4. UNPACKING AND
CHECKING

4.1 PACKAGING

Carefully remove the product from the packaging and
examine it for any sign of damage. Check contents
against the parts shown in Fig A. If any part is damaged
or missing, please contact the Draper Help Line (see
back page). Do not attempt to use the product!

The packaging material should be retained during the
warranty period, in case the product needs to be
returned for repair.

Warning!

• Some of the packaging materials may be harmful to
children. Do not leave any of these materials in
reach of children.

• If any of the packaging is to be thrown away, make
sure they are disposed of correctly, according to local
regulations.

–

5. IDENTIFICATION – FIG.A

Stock No. 19406 shown

(2)

(1)

(1) Inlet.
(2) Handle.

FIG.A

Note: For details of our full range of accessories and consumables, please visit drapertools.com

(3) On/off switch.
(4) Power lead.

6. SETTING UP FAN

6.1 TO EXTRACT AIR

The ducting can be attached to either end of the
ventilator unit.

Attach the ducting to the outlet side (5) of the ventilator,
ensuring a tight fit. Secure by pulling the string tight and
knotting it. Locate the other end of the ducting in the
area from which you wish to extract air.

(3)

(4)

(6)

(5)

(7)

(5) Outlet.
(6) 5M ducting.

6.2 TO VENTILATE

Attach the ducting to the inlet side (1) of the ventilator,
ensuring a tight fit. Secure by pulling the string tight and
knotting it. Locate the other end of the ducting in the
area that you wish to ventilate.

Only connect to the mains plug after attaching ducting.

Always ensure the fan is switched off, ensure mains plug
is removed and that the fan blade has stopped rotating
before moving.

(7) Rubber feet.

(1) (5)

FIG.

1

– 4 –

7. MAINTENANCE

7.1 MAINTENANCE

1. Always unplug the fan from the power supply before
cleaning.

2. All plastic components should be cleaned with a
damp cloth. DO NOT spray with water/cleaning
agents or immerse the fan unit in water.

3. Warning! Ensure that any water and/or cleaning
detergent DOES NOT enter the motor housing or
switch mechanism.

4. Ensure that the unit is clean, dry and correctly
assembled after cleaning and before every use.

8. WARRANTY

9. DISPOSAL

9.1 DISPOSAL

Ensure that the machine is disposed of according to
national regulations at the end of its working life or when
it can no longer be repaired.

DO NOT:

• Dispose of power tools with domestic waste.

• Incinerate.

• Abandon in the environment.

• Dispose of WEEE as unsorted municipal waste.

8.1 WARRANTY

Draper tools have been carefully tested and inspected
before shipment and are guaranteed to be free from
defective materials and workmanship.

Should the tool develop a fault, please return the
complete tool to your nearest distributor or contact:

Draper Tools Limited

UK: Chandler’s Ford, Eastleigh, Hampshire,
SO53 1YF. England.

EU: Oude Graff 8, 6002 NL Weert (NL).

Telephone Sales Desk: [phone] or:

Product Helpline [phone].

A proof of purchase must be provided.

If upon inspection it is found that the fault occurring is
due to defective materials or workmanship, repairs will
be carried out free of charge. This warranty period
covering labour/parts is 12 months from the date of
purchase except where tools are hired out when the
warranty period is 90 days from the date of purchase.
This warranty does not apply to any consumable parts,
any type of battery or normal wear and tear, nor does it
cover any damage caused by misuse, careless or
unsafe handling, alterations, accidents, or repairs
attempted or made by any personnel other than the
authorised Draper warranty repair agent.

Note: If the tool is found not to be within the terms of
warranty, repairs and carriage charges will be quoted
and made accordingly.

This warranty applies in lieu of any other warranty
expressed or implied and variations of its terms are not
authorised.

Your Draper warranty is not effective unless you can
produce upon request a dated receipt or invoice to verify
your proof of purchase within the warranty period.

Please note that this warranty is an additional benefit
and does not affect your statutory rights.

Draper Tools Limited.

– 5 –