GRAVITY FEED
S PR AY
GUN
09706, 09707
EN
Original Instructions
Version 1
1. Preface
EN
These are the original product instructions. This
document is part of the product; retain it for the life
of the product, passing it on to subsequent holders.
Read this manual in full before attempting to
assemble, operate or maintain this product.
This Draper Tools manual describes the purpose
of the product and contains all the necessary
information to ensure its correct and safe use.
Following all the instructions and guidance in
this manual will ensure the safety of both the
product and the operator and increase the
lifespan of the product.
1.1 Product Reference
User Manual for: HVLP Air Spray Gun with Gravity Fed
Hopper, 600ml
Stock No: 09706, 09707
Part No: GSG5-600, GSG5-COMP-600
1.2 Revisions
Version 1: January 2010
First release
Version 2: October 2022
Separated from combined manual
General formatting and content updates
As our manuals are continually updated, always ensure
that the latest version is used.
Please visit drapertools.com/manuals for the latest
version of this manual and the associated parts list,
if applicable.
All photographs and drawings within this manual are
supplied by Draper Tools to help illustrate correct
operation of the product.
Every eort has been made to ensure the
information contained in this manual is accurate.
However, Draper Tools reserves the right to amend
this document without prior warning. Always use the
latest version of the product manual.
1.3 Understanding the Safety Content of
This Manual
WARNING!
in personal injury or death.
CAUTION! – Situations or actions that may result
in damage to the product or surroundings.
Important: – Information or instructions of particular
importance.
– Situations or actions that may result
1.4 Copyright © Notice
Copyright © Draper Tools Limited.
Permission is granted to reproduce this manual for
personal and educational use ONLY. Commercial
copying, redistribution, hiring or lending is strictly
prohibited.
No part of this manual may be stored in a retrieval system
or transmitted in any other form or means without written
permission from Draper Tools Limited.
In all cases, this copyright notice must remain intact.
– 2 –
2. Contents
EN
1. Preface 2
1.1 Product Reference 2
1.2 Revisions 2
1.3 Understanding the Safety Content of
This Manual 2
1.4 Copyright © Notice 2
2. Contents 3
3. Warranty 4
4. Product Introduction 5
4.1 Scope 5
4.2 Specication 5
5. Health and Safety Information 6
5.1 General Health and Safety Precautions 6
5.2 Additional Safety Instructions for
Air Tools 6
6. Identication and Unpacking 8
6.1 Product Overview 8
6.2 What’s in the Box? 9
6.3 Packaging 9
7. Preparation Instructions 10
7.1 Preparing the Air Supply for Use 10
7.2 Cleaning the Product and Accessories
Before First Use 10
7.3 Assembly, Filling and Connection 10
8. Operating Instructions 12
8.1 The Air Control Dial 12
8.2 The Fluid Control Dial 12
8.3 The Spray Control Dial 12
8.4 The Air Cap 12
8.5 The Trigger 13
8.6 Notes on Use 13
9. Maintenance and Troubleshooting 14
9.1 General Maintenance 14
9.2 Cleaning the Spray Gun 14
9.3 Storing the Product 15
9.4 Troubleshooting 15
10. Spares, Returns and Disposal 17
11. Explanation of Symbols 18
– 3 –
3. Warranty
EN
Draper Tools products are carefully tested and inspected
before shipment and are guaranteed to be free from
defective materials and workmanship.
Should the tool develop a fault, return the complete tool
to your nearest distributor or contact Draper Tools
directly. Contact information can be found at the back of
this manual.
Proof of purchase must be provided.
If, upon inspection, it is found that the fault occurring is
due to defective materials or workmanship, repairs will
be carried out free of charge. This warranty period covers
parts and labour for six months from the date of
purchase. Where tools have been hired out, the warranty
period covers 90 days from the date of purchase.
This warranty does not apply to any consumable parts,
batteries or normal wear and tear, nor does it cover any
damage caused by misuse, careless or unsafe handling,
alterations, accidents, or repairs attempted or made by
any personnel other than the authorised Draper Tools
repair agent.
In all cases, to make a claim for faulty workmanship or
materials within the standard warranty period, please
contact or return the product to the place of purchase.
Proof of purchase may be required.
If the place of purchase is no longer trading or if you
experience any diculties with your warranty, please
contact Customer Services with the product details and
your proof of purchase. Contact details can be found at
the back of this manual.
If the tool is not covered by the terms of this warranty,
repairs and carriage charges will be quoted and charged
accordingly.
This warranty supersedes any other guarantees
expressed or implied and variations of its terms are not
authorised.
Your Draper Tools guarantee is not eective until you can
produce, upon request, a dated receipt or invoice to
verify your purchase within the guarantee period.
Please note that this warranty is an additional benet
and does not aect your statutory rights.
Draper Tools Limited
– 4 –
4. Product Introduction
EN
4.1 Scope
This product is a gravity-fed high velocity, low pressure
(HVLP) spray paint gun for use with compressed air
systems and is suitable for use with all types of paint,
particularly water-based paints. HVLP spray guns deliver
more uid at lower pressures and are designed to provide
a ner nish than other types of spray gun.
4.2 Specication
Stock No. 09706 09707
Part No. GSG5-600 GSG5-COMP-600
Nozzle size: 1.4mm 1.4mm
Cup capacity: 600ml 600ml
Operating air pressure: 2.0–3.0bar (30–43psi) 2.0–3.0bar (30–43psi)
Max. air pressure: 3.0bar (43psi) 3.0bar (43psi)
Average. air consumption: 170–283L/min 170–283L/min
Air inlet: 1/4” BSP 1/4” BSP
Fluid delivery rate: 160–240ml/min 160–240ml/min
Sound pressure level: 74dB(A) 72dB(A)
Sound power level: 85dB(A) 83dB(A)
Vibration level: <2.5m/s
Net weight: 0.736kg 0.558kg
Part of our core range, this product is suitable for
regular use by enthusiasts and tradespersons alike.
WARNING! This product is not a toy and must
be respected.
Read this manual in full before attempting to assemble,
operate or maintain the product, and retain it for later use.
2
<2.5m/s
2
– 5 –
5. Health and Safety Information
EN
Important: Read all the Health and Safety instructions
before attempting to operate, maintain or repair this
product. Non-compliance with these instructions may
result in injury or damage to the user or the product.
5.1 General Health and Safety
Precautions
• Only authorised personnel who have carefully read
and understood this manual may operate, adjust and
repair this product.
• Observe all standard safety precautions and good
practices when working with air tools.
• Always wear adequate eye protection and a face mask
when using this product.
− Some products suitable for use with this product
may contain chemicals or toxic components.
− Avoid inhalation or contact with materials used
with this product.
− If contact occurs, seek medical advice as soon
as possible.
• Wear ear defenders and protective gloves while using
this product.
• Keep your work environment clear and well-lit,
with bystanders at a safe distance.
• Use this product ONLY in well-ventilated areas to
avoid the build-up of fumes and allow paint particles
to disperse.
• Keep out of reach of children.
• Before every use, inspect the tools for missing,
broken, loose or corroded parts.
Important: DO NOT use this product if it is damaged
in any way. Contact Draper Tools to discuss repair and
replacement options.
• Ensure that all accessories and attachments are
securely tightened before use.
• Use the product only in the manner instructed in
this manual.
• DO NOT modify this product in any way.
• ONLY use spare parts supplied by Draper Tools.
• Stay alert at all times; DO NOT use this product while
tired or under the inuence of alcohol, drugs or
other medication.
5.2 Additional Safety Instructions for
Air Tools
• Compressed air can cause severe injury.
− ALWAY S turn o and disconnect the air supply
before making any adjustments to the product or
leaving it unattended.
− NEVER direct this product towards yourself
or others.
− Ensure that compressed air is not blocked by or in
contact with any part of your body.
• ONLY use clean, dry and regulated compressed air.
• Draper Tools recommends the use of a whip
• Ensure that the product is compatible with the air
• Ensure all connections are securely tightened.
• DO NOT exceed the maximum stated air pressure.
• DO NOT obstruct the ability of the trigger to release
• NEVER carry the tool by the air line.
• Some parts of the spray gun may become hot
• NEVER spray ammable substances near open ames
• DO NOT use this tool in temperatures that do not fall
WARNING! NEVER use oxygen, combustible
gases or other bottled gases as a supply for
this product. Use of these substances may
cause the product to explode.
hose between the tool and the air supply to
reduce vibration.
CAUTION! Whipping hoses can cause
severe injury. Always check for and replace
damaged or loose hoses and ttings.
supply before use.
− The pressure of the connected air supply MUST
NOT exceed more than 10% of the rated pressure
of the product.
once depressed.
during use.
− Allow the nozzle and paint cup to cool after use
before handling or adjusting them.
or sources of heat and ignition.
− DO NOT smoke in the vicinity of this product.
within 0–40°C.
– 6 –
Loading...