31" TOWER
FAN
09125
These instructions accompanying the product are the original instructions. This document is part of the product,
keep it for the life of the product passing it on to any subsequent holder of the product. Read all these
instructions before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been
designed, and contains all the necessary information to ensure its correct and safe use. By following all the
general safety instructions contained in this manual, it will ensure both product and operator safety, together
with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper
Tools policy of continuous improvement determines the right to make modifications without prior warning.
1. TITLE PAGE
1.1 INTRODUCTION:
USER MANUAL FOR: 31" Tower Fan
Stock No: 09125
Part No: FAN17
1.2 REVISIONS:
Date first published February 2018.
As our user manuals are continually updated, users should make sure that they use
the very latest version.
Downloads are available from: http://drapertools.com/manuals
Draper Tools Limited
Hursley Road
Chandler’s Ford
Eastleigh
Hampshire
SO53 1YF
UK
Website: drapertools.com
Product Helpline: +44 (0) 23 8049 4344
General Fax: +44 (0) 23 8026 0784
1.3 UNDERSTANDING THIS MANUALS SAFETY CONTENT:
WARNING! – Information that draws attention to the risk of injury or death.
CAUTION! – Information that draws attention to the risk of damage to the product or
surroundings.
1.4 COPYRIGHT © NOTICE:
Copyright © Draper Tools Limited.
Permission is granted to reproduce this publication for personal and educational use
only. Commercial copying, redistribution, hiring or lending is prohibited.
No part of this publication may be stored in a retrieval system or transmitted in any
other form or means without written permission from Draper Tools Limited.
In all cases this copyright notice must remain intact.
2. CONTENTS
1. TITLE PAGE
1.1 INTRODUCTION.......................................................................................................... 2
1.2 REVISION HISTORY .................................................................................................. 2
1.3 UNDERSTANDING THIS MANUAL ............................................................................. 2
1.4 COPYRIGHT NOTICE .................................................................................................2
2. CONTENTS
2.1 CONTENTS .................................................................................................................... 3
3. GUARANTEE
3.1 GUARANTEE ............................................................................................................... 4
4. INTRODUCTION
4.1 SCOPE.........................................................................................................................5
4.2 SPECIFICATION.......................................................................................................... 5
4.3 HANDLING & STORAGE............................................................................................. 5
5. HEALTH AND SAFETY INFORMATION
5.1 GENERAL SAFETY INSTRUCTIONS FOR POWER TOOL USE ............................6-7
5.2 ADDITIONAL SAFETY INSTRUCTIONS FOR FANS ..................................................7
5.3 CONNECTION TO THE POWER SUPPLY..................................................................7
6. TECHNICAL DESCRIPTION
6.1 IDENTIFICATION ........................................................................................................ 8
7. UNPACKING AND CHECKING
7.1 PACKAGING ................................................................................................................ 9
7.2 WHAT´S IN THE BOX? ................................................................................................9
8. ASSEMBLING THE FAN
8.1 ASSEMBLING THE BASE TO THE FAN BODY........................................................10
9. FAN INSTRUCTION
9.1 CONTROL PANEL
– 1) ON/OFF Switch .................................................................................................. 11
– 2) Speed selection switch..................................................................................... 11
– 3) Timer selection switch...................................................................................... 11
– 4) Mode switch....................................................................................................... 11
– 5) Oscillation switch.............................................................................................. 11
9.2 REMOTE CONTROL.................................................................................................. 11
10. MAINTENANCE
10.1 Maintenance...............................................................................................................12
11. EXPLANATION OF SYMBOLS
11.1 EXPLANATION OF SYMBOLS ..................................................................................13
12. DISPOSAL
12.1 DISPOSAL..................................................................................................................14
DECLARATION OF CONFORMITY .............................................................................. ENCLOSED
- 3 -
3. GUARANTEE
3.1 GUARANTEE
Draper tools have been carefully tested and inspected before shipment and are guaranteed to be
free from defective materials and workmanship.
Should the tool develop a fault, please return the complete tool to your nearest distributor or
contact:
Draper Tools Limited, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF. England.
Telephone Sales Desk: (023) 8049 4333 or:
Product Helpline (023) 8049 4344.
A proof of purchase must be provided.
If upon inspection it is found that the fault occurring is due to defective materials or workmanship,
repairs will be carried out free of charge. This guarantee period covering parts/labour is 12 months
from the date of purchase except where tools are hired out when the guarantee period is 90 days
from the date of purchase. The guarantee is extended to 24 months for parts only. This guarantee
does not apply to normal wear and tear, nor does it cover any damage caused by misuse, careless
or unsafe handling, alterations, accidents, or repairs attempted or made by any personnel other
than the authorised Draper warranty repair agent.
Note: If the tool is found not to be within the terms of warranty, repairs and carriage charges will be
quoted and made accordingly.
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its
terms are not authorised.
Your Draper guarantee is not effective unless you can produce upon request a dated receipt or
invoice to verify your proof of purchase within the guarantee period.
Please note that this guarantee is an additional benefit and does not affect your statutory rights.
Draper Tools Limited.
- 4 -
4. INTRODUCTION
4.1 SCOPE
The remote control oscillating tower fan described in this booklet is intended for air flow circulation
uses in home or office environments.
4.2 SPECIFICATION
Stock No................................................................................................................................... 09125
Part No. .................................................................................................................................. FAN17
Motor:
Rated voltage ........................................................................................................................230V
Rated frequency.....................................................................................................................50Hz
Rated input .............................................................................................................................40W
No. of speeds .................................................................................................................................. 3
Dimensions (WxHxD) ................................................................................................... 790 x 180mm
Weight (fan only) ....................................................................................................................... 1.8kg
4.3 HANDLING & STORAGE
This fan is designed to be moved to different locations. Ensure it is always operated on a firm and
stable surface. Ensure that water and/or cleaning detergent does not enter the motor housing or
switch mechanism.
Loading...