Installing
Worktop
Stock No.
33171, 33172, 33178, 33180,
33182, 33192, 33203, 33210
To make assembly easier we recommend having two persons aid one another in assembly.
Place the worktop on cabinets, align the pre-drilled holes in worktop with holes in cabinets, secure
bolt M6 x 16mm through the top of the cabinets into the worktop pre-drilled holes.
drapertools.com
Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire. SO53 1YF UK.
Installing Back Panel /
Wall Cabinet with Wall
Brackets (Single & Double)
To make assembly easier we recommend having two persons aid one another in assembly.
Stock No.
33196 / 33162
STEP 1:
Attach wall bracket (single and double) to cabinet
with bolt M8 x16mm, washer 18 x 8 x 1mm and spring
washer 14 x 8.8 x 2.6mm, and tighten with wrench
(not included).
STEP 2:
Attach back panel to wall bracket (single and double)
with bolt M6 x 16mm, nut M6 and spring washer
12 x 6.5 x 0.8mm, and tighten with wrench
(not included).
STEP 3:
Attach wall cabinet to wall bracket (single and double) with bolt M8 x 16mm, at washer 8 x 8 x 1mm
and spring washer 14 x 8.8 x 2.6mm, and tighten with wrench (not included)
STEP 4:
Connect the side panels of two cabinets with M6 x 16mm and nut M6, and tighten with wrench (not included).
CABINET CONNECTION
Connect the side panels of two cabinets
with (4) bolt M6 x 16mm and nut M6,
and tighten with wrench (not included).
Note: remove the drawers and open the
doors before cabinet connection.
tall cabinet
drapertools.com
Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire. SO53 1YF UK.
wall cabinet
floor cabinet
Installing
Wall Bracket
Stock No.
33197, 33198
• Attach wall bracket (double) to back panel with (10)
bolt M6 x 16mm, nut M6 and at washer 12 x 6.5 x
0.8mm, and tighten with wrench
(not included).
• Attach wall bracket (double) to wall cabinets and
base cabinets / trolley with (8) bolt M8 x 16mm, at
washer 18 x 8 x 1mm and spring washer
14 x 8.8 x 2.6mm, and tighten with wrench
(not included).
• Attach wall bracket (single) to back panel with (5)
bolt M6 x 16mm, nut M6 and at washer
12 x 6.5 x 0.8mm,and tighten with wrench
(not included).
• Attach wall bracket (single) to wall cabinets and
base cabinets / trolley with (4) bolt M8 x 16mm,
at washer 18 x 8 x 1mm and spring washer
14 x 8.8 x 2.6mm, and tighten with wrench
(not included).
drapertools.com
Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire. SO53 1YF UK.
Loading...