Page 1
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE
SAFE AND EFFECTIVE USE OF THIS PRODUCT.
INSTRUCTIONS
These instructions accompanying the product are the original instructions. This document is part of the product, keep
it for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before
assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed,
and contains all the necessary information to ensure its correct and safe use. By following all the general safety
instructions contained in this manual, it will ensure both product and operator safety, together with longer life of the
product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools
policy of continuous improvement determines the right to make modifications without prior warning.
16” Remote
Controlled
Wall Mounted Fan
74842 - FAN7B
Page 2
1. TITLE PAGE
1.1 INTRODUCTION:
USER MANUAL FOR:
16” REMOTE CONTROLLED WALL MOUNTED FAN
Stock no. 74842.
Part no. FAN7B.
1.2 REVISIONS:
As our user manuals are continually updated, users should make sure that they use the very latest
version.
Downloads are available from: http://www.drapertools.com/manuals
DRAPER TOOLS LIMITED WEBSITE: drapertools.com
HURSLEY ROAD PRODUCT HELPLINE: +44 (0) 23 8049 4344
CHANDLER’S FORD GENERAL FAX: +44 (0) 23 8026 0784
EASTLEIGH
HAMPSHIRE
SO53 1YF
UK
1.3 UNDERSTANDING THIS MANUALS SAFETY CONTENT:
WARNING! Information that draws attention to the risk of injury or death.
CAUTION! Information that draws attention to the risk of damage to the product or
surroundings.
1.4 COPYRIGHT © NOTICE:
Copyright © Draper Tools Limited.
Permission is granted to reproduce this publication for personal & educational use only.
Commercial copying, redistribution, hiring or lending is prohibited.
No part of this publication may be stored in a retrieval system or transmitted in any other form or
means without written permission from Draper Tools Limited.
In all cases this copyright notice must remain intact.
Date first published March 2017
Page 3
3
2. CONTENTS
2.1 CONTENTS
Page content Page
1 TITLE PAGE
1.1 INTRODUCTION ............................................................................................... 2
1.2 REVISION HISTORY........................................................................................... 2
1.3 UNDERSTANDING THIS MANUAL ................................................................... 2
1.4 COPYRIGHT NOTICE......................................................................................... 2
2 CONTENTS
2.1 CONTENTS ........................................................................................................ 3
3 GUARANTEE
3.1 GUARANTEE .....................................................................................................4
4 INTRODUCTION
4.1 SCOPE ............................................................................................................... 5
4.2 SPECIFICATION ................................................................................................. 5
4.3 HANDLING & STORAGE ...................................................................................5
5 HEALTH & SAFETY INFORMATION
5.1 GENERAL SAFETY INSTRUCTIONS ...................................................................6
5.2 CONNECTION TO THE POWER SUPPLY ........................................................... 6
6 TECHNICAL DESCRIPTION
6.1 IDENTIFICATION ...............................................................................................7
7 UNPACKING & CHECKING
7.1 PACKAGING...................................................................................................... 8
7.2 WHAT’S IN THE BOX ........................................................................................ 8
8 PREPARING THE FAN
8.1 ASSEMBLING THE PROTECTIVE BLADE GRILLES ............................................. 9
8.2 MOUNTING TO A WALL................................................................................... 10
9 OPERATING INSTRUCTIONS
9.1 REMOTE CONTROLLER OPERATION ............................................................... 11
9.2 USE OF REMOTE CONTROL.............................................................................. 12
REPLACING BATTERIES.....................................................................................12
10 MAINTENANCE
10.1 MAINTENANCE................................................................................................. 13
11 EXPLANATION OF SYMBOLS
11.1 EXPLANATION OF SYMBOLS ........................................................................... 14
12 DISPOSAL
12.1 DISPOSAL .........................................................................................................15
DECLARATION OF CONFORMITY .....................................................................................ENCLOSED
Page 4
4
3. GUARANTEE
3.1 GUARANTEE
Draper products have been carefully tested and inspected before shipment and are guaranteed to
be free from defective materials and workmanship.
Should the tool develop a fault, please return the complete unit to your nearest distributor or
contact Draper Tools Limited, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF. England.
Telephone Sales Desk: (023) 8049 4333 or Product Helpline (023) 8049 4344.
A proof of purchase must be provided with the unit.
If upon inspection it is found that the fault occurring is due to defective materials or workmanship,
repairs will be carried out free of charge. This guarantee period covering parts/labour is 12 months
from the date of purchase except where tools are hired out when the guarantee period is 90 days
from the date of purchase. The guarantee is extended to 24 months for parts only. This guarantee
does not apply to normal wear and tear, nor does it cover any damage caused by misuse, careless
or unsafe handling, alterations, accidents, or repairs attempted or made by any personnel other
than the authorised Draper warranty repair agent.
Note: If the unit is found not to be within the terms of warranty, repairs and carriage charges will be
quoted and made accordingly.
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its
terms are not authorised.
Your Draper guarantee is not effective unless you can produce upon request a dated receipt or
invoice to verify your proof of purchase within the guarantee period.
Please note that this guarantee is an additional benefit and does not affect your statutory rights.
Draper Tools Limited.
Page 5
5
4. INTRODUCTION
4.1 SCOPE
Wall mounted fan for circulating air, ideal for use in and around the home, office or
workshop.
4.2 SPECIFICATION
Stock No.............................................................................................................................. 74842
Part No............................................................................................................................... FAN7B
Rated voltage ................................................................................................................ 220-240V
Rated frequency................................................................................................................... 50Hz
Rated input............................................................................................................................55W
Diameter Ø ............................................................................................................................. 16"
Speed Settings........................................................................................................................... 3
Maximum Airflow ....................................................................................................... 65m
3
/min
Remote Control ........................................................................... 2 x 1.5V AAA ( Not Included)
Net Weight ........................................................................................................................ 3.42kg
4.3 HANDLING & STORAGE
Take care when handling and lifting. Do not drop this machine.
Store in a dry location out of the reach of children.
Page 6
6
5. HEALTH & SAFETY INFORMATION
5.1 GENERAL SAFETY INSTRUCTIONS
WARNING:
Please read the following instructions carefully, failure to do so could lead to serious personal injury.
INSTRUCTIONS:
Drpaer Tools Limited recommends that this fan is not to be modified or used for any application
other than that for which it was designed. If you are unsure of its relative applications do not
hesitate to contact us in writing and we will advise you.
· Keep out of reach of children.
· Do not leave the fan running unattended.
· Remove the plug from the socket before carrying out adjustment, servicing or maintenance.
· Complete any assembly procedures prior to connection to the power supply.
· Never insert fingers, pencils, or any other object through the protective grille, while the fan
is running.
· Disconnect the fan from the power supply when moving it from one location to the other.
· Ensure that the fan is switched off from the supply mains before removing the guard.
· Always complete the assembly of the fan before switching it on after cleaning.
· Always ensure fan is correctly mounted to a secure surface able to take its weight and
operational loads before operating.
· Do not use fan near an open window, as rain can create an electrical hazard.
· If the power supply cable becomes damaged, it should be replaced immediately.
· If the replacement of the supply core is necessary, this has to be done by the manufacturer or
his agent in order to avoid a safety hazard.
· Do not use this fan with an externally connected speed control device.
5.2 CONNECTION TO THE POWER SUPPLY
Make sure the power supply information on the machine’s rating plate are compatible with the
Power supply you intent to connect it to.
This fan comes supplied with a UK standard 3 pin plug. It is designed for connection to a
Domestic power supply rated at 230V AC.
It is Class 2 (double insulated); is designed for connection to a power supply matching that detailed
on the rating label and compatible with the plug fitted.
If an extension lead is required, use an approved and compatible lead rated for this appliance.
Follow all the instructions supplied with the extension lead.
This product requires no earth connection as supplementary insulation is applied to the basic
insulation to protect against electric shock in te event of failure to the basic insulation.
Page 7
7
6. TECHNICAL DESCRIPTION
6.1 IDENTIFICATION
Mode setting
Swing button
Speed
On/off button
Timer
(Remote control)
(Fan body controls)
Page 8
8
7. UNPACKING & CHECKING
7.1 PACKAGING
Carefully remove the fan from the packaging and examine it for any sign of damage that may
have happened during shipping. Lay the contents out and check them against the parts shown
below. If any part is damaged or missing; please contact the Draper Helpline (the telephone
number appears on the Title page) and do not attempt to use the tool.
The packaging material should be retained at least during the guarantee period: in case the
machine needs to be returned for repair.
Warning! Some of the packaging materials used may be harmful to children. Do not leave any of
these materials in the reach of children.
If any of the packaging is to be thrown away, make sure they are disposed of correctly; according
to local regulations.
7.2 WHATS IN THE BOX?
As well as the fan; there are several parts not fitted or attached to it.
Rear protective grille
Front protective grille
Fan blade
Fan motor
Wall mounting bracket and screws
Securing clip
Fan pivot point
Power lead
Page 9
9
8. PREPARING THE FAN
8.1 ASSEMBLING THE PROTECTIVE BLADE GRILLES
Front guard
Fan securing nut
Securing clip
Fan blade
Motor shaft
Rear guard nut
Rear guard
Motor unit
1. Unscrew the fan securing nut clockwise
(NOTE: fan securing nut has a reverse thread!)
and the plastic rear guard nut anticlockwise to
remove both of them. Fix the rear guard
to the
motor with the rear guard nut then tighten (Fig.1).
2. Place the blade into shaft, and make sure the rotor
shaft pin is fitted into the groove of the blade.
Turn the fan securing nut anticlockwise to
tighten the blade. (Fig.2)
3a. Assemble the guard clip and place loosely
around the rear guard. (Fig. 3)
3b. Carefully insert the front guard into the guard clip,
and when secure, fully tighten the retaining
screw. (Fig. 4)
3c. Check to ensure that the guard clip is securing the
front to the rear guard correctly. DO NOT use the
fan without both guards securely in place.
Fig. 4
Fig. 3
Fig. 1
Tighten
Loosen
Fan securing nut
Tighten
Loosen
Fig. 2
Blade
Fan securing nut
Groove
Stopper pin
Page 10
10
8.2 MOUNTING ON THE WALL
The fan must be correctly installed before use. Caution: to prevent the fan from falling off, do
not install it on walls that are unable to correctly support the weight and load of the fan unit. If in
any doubt seek advice from an appropriately qualified person.
1. Fix the supplied mounting bracket firmly to the
wall using the two screws or alternative correctly
specified fixings. (Fig. 5)
NOTE: The bracket should be a minimum of 30cm
from the ceiling and any adjoining wall and away
from doors, windows and moveable fabrics (curtains etc).
2. Installing the stand:
Mount the stand on the bracket by inserting the
hook on the rear of the fan into the slot on the wall
bracket
.
TO ADJUST THE FAN ANGLE
Push the guard gently to the desired up or down angle. (Fig. 6)
8. PREPARING THE FAN
Fig. 5
Fig. 6
Page 11
11
9. OPERATING INSTRUCTIONS
9.1 REMOTE CONTROL OPERATION. FIG. 7
ON/OFF KEY
The key is for switching on the fan. The fan will be
started at a low speed. Press this key again and
the fan will be switched off.
◷TIMER KEY
When this key is touched repeatedly or kept in pressed state, the fan
timer will be set for continuous operation during increased steps of
0.5 hour to 7.5 hour in 15 steps.
For instance, if the fan operation is required to be set for 5.5 hours, this
key must be touched repeatedly so that the indicator lamps for 0.5,
1 and 4 hours light together. It means that the set time is
0.5 + 1 + 4 = 5.5 hours.
The time settling indicated by the indicator lamps will decrease gradually in
units of 0.5 hour during operation in this mode.
Don’t press the TIMER key when the fan is required to operate continuously.
SPEED KEY
After the fan has started, this key serves as a speed selector in the sequence from
“low-medium-high-low” when this key is being touched either repeatedly or continuously.
OSCILLATION KEY
After the fan has started, press this key to oscillate the fan, and stop the oscillation at
desired direction by pressing again.
MODE KEY
Press this key select mode. This key is the selector key for the fan air type. The changes
in the sequence are NORMAL-NATURAL-SLEEP-NORMAL-NATURAL. The 3 fan air types
are as follows:
NORMAL:
The fan delivers air constantly with high, medium or low speed set by the SPEED key.
NATURAL:
The fan delivers air according to the in built pre-set programme simulating natural wind.
The fan varies from strong to weak or vice-versa.
SLEEP:
The fan weakens step by step during the present time until it stops. Then the fan switches
automatically off. This function will ONLY operate when the fan timer function is engaged.
Fig. 7
Page 12
12
9. OPERATING INSTRUCTIONS
USE OF REMOTE CONTROL.
Point the remote a the body of the fan and press the required buttons to operate. The remote
will work up to approximately 5 meters from the body and up to a 30 degree angle right and
left of the fan body.
REPLACING BATTERIES
(NOT INCLUDED) FIG.1
1. Press down on the battery compartment
cover gently and slide it out.
2. Insert the batteries, making sure that the
positive terminals are facing the correct way.
3. Replace the cover.
BATTERY WARNING
1. Do not dispose of batteries in fire, they may
explode or leak.
2. Do not mix old and new batteries.
4. Do not mix alkaline, standard (crabon-zinc) or
rechargeable (nickel-cadmium) batteries.
Fig. 1
Battery cover
Battery
Remote controller
Page 13
13
10. MAINTENANCE
10.1 MAINTENANCE
1. Always unplug the fan from the power supply before cleaning.
2. All plastic components should be cleaned with a damp cloth. DO NOT spray with water/cleaning
agents or immerse the fan unit in water.
3. WARNING: Ensure that any water and/or cleaning detergent DOES NOT enter the motor
housing or switch mechanism.
4. Ensure that the unit is clean, dry and correctly assembled after cleaning and before every use.
Page 14
14
11. EXPLANATION OF SYMBOLS
11.1 EXPLANATION OF SYMBOLS
WEEE
Do not dispose of Waste Electrical
& Electronic Equipment in with
domestic rubbish
Class II construction
(Double insulated).
Page 15
15
12. DISPOSAL
12.1 DISPOSAL
- At the end of the machine’s working life, or when it can no longer be repaired, ensure that it is
disposed of according to national regulations.
- Contact your local authority for details of collection schemes in your area.
In all circumstances:
• Do not dispose of power tools with domestic waste.
• Do not incinerate.
• Do not abandon in the environment.
• Do not dispose of WEEE*
as unsorted municipal waste.
* Waste Electrical & Electronic Equipment.
Page 16
16
NOTES
Page 17
17
NOTES
Page 18
18
NOTES
Page 19
19
NOTES
Page 20
CONTACTS
- DRAPER TOOLS LIMITED,
Hursley Road, Chandler's Ford,
Eastleigh, Hampshire. SO53 1YF. U.K.
- Helpline: (023) 8049 4344
- Sales Desk: (023) 8049 4333
- General Enquiries: (023) 8026 6355
- Service/Warranty Repair Agent
For aftersales servicing or warranty repairs, please
contact the Draper Tools Helpline for details of an
agent in your local area.
YOUR DRAPER STOCKIST
RDMC1116
drapertools.com
Loading...