Page 1
DRAPER TOOLS LTD, HURSLEY ROAD, CHANDLER'S FORD, EASTLEIGH, HANTS. SO53 1YF. U.K. www.draper.co.uk e-mail: [email protected]
240V
Paper Shredder
Stock No.69263 Part No.PS3
SPECIFICATION
SAFETY INSTRUCTIONS
ASSEMBLY
OPERATION AND USE
The Draper Tools policy of continuous improvement determines the right to change specification
without notice.
Stock No. ............................................................................................................................................ 69263
Part No. ................................................................................................................................................... PS3
Paper Inlet Size .................................................................................................................................. 229mm
Output Shred Dimension ........................................................................................................ 6mm (approx.)
Max. Sheet Input @ Any Time * ......................................................................................................... 5 pieces
Recommended Run Time ...................................................................... 2mins. ON continuously, 4 mins. OFF
*Based on standard 80 gram paper
■ Store the paper shredder in a safe place which is out of the reach of children.
■ To prolong service life, do not feed paper clips or staples into the shredder.
■ To avoid injury, do not feed fingers, hair and neck ties into the shredder.
■ To avoid overloading the shredder, feed no more than 5 pieces of paper into the shredder at a time.
■ Unplug if not used for long periods of time.
■ Slide the switch to the ‘AUTO/ON’ position, ensuring nothing is near the blade area.
■ Feed the paper into the inlet. Release the paper as soon as it is taken up by the shredder to avoid injury.
■ Should the paper become stuck or jammed, slide the switch to the ‘REV’ position to reverse the feed.
■ Do not feed more than five pieces of paper at a time and do not feed through documents that contain
paper clips or staples, as this will shorten the life of the blades and motor dramatically.
■ For continuous feed, switch the slide switch to the ‘AUTO/ON’ position.
■ Always switch the shredder off and unplug it from the mains in between uses.
NOTE: It is good practice to double check the document prior to shredding to ensure no important
documents are shredded inadvertently.
■ Clip the upper and lower sections of the waste paper collection bin together.
■ Place the shredder assembly over the bin and the paper shredder is ready for use.
11/2004INSTRUCTIONS
Page 2
DRAPER TOOLS LTD, HURSLEY ROAD, CHANDLER'S FORD, EASTLEIGH, HANTS. SO53 1YF. U.K. www.draper.co.uk e-mail: [email protected]
DECLARATION OF CONFORMITY
240V
Paper Shredder
Stock No.69263 Part No.PS3
We :
Draper Tools Ltd.,
Hursley Road,
Chandler’s Ford,
Eastleigh, Hampshire.
SO53 1YF.
England.
Declare under our sole responsibility that the product:
Stock No:- 69263.
Part No:- PS3.
Description:- Paper Shredder.
To which this declaration relates is in conformity with the following directive(s) 73/23/EEC & 89/336/EEC
With reference to EN60950:2000, EN55014-1:2000, EN55014-2:1997, EN61000-3-2:2000 &
EN61000-3-3:1995
J.N. Draper
Managing Director 23/09/2002
11/2004INSTRUCTIONS
Loading...