Draper GS1500, GS1800 Instructions Manual

GARDEN SHREDDERS

■ STOCK No.56635 ■ PART No.GS1500

56636 GS1800

02/99

• INSTRUCTIONS •

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE

SAFE AND EFFECTIVE USE OF THIS TOOL.

SPECIFICATION

Whilst every effort has been made to ensure that the information given in this manual is correct at
the time of going to print, the Draper Tools policy of continuous improvement determines the right
to change specification without notice.

STOCK No. . . . . . . . . . . . . . . . . . . . . . . . . . . 56635 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56636

PART No. . . . . . . . . . . . . . . . . . . . . . . . . . . . GS1500 . . . . . . . . . . . . . . . . . . . . . . . . . . . GS1800

VOLTAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . 230V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230V

MOTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1500W . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800W

CUTTING CAPACITY . . . . . . . . . . . . . . . . . 32mmØ . . . . . . . . . . . . . . . . . . . . . . . . . . . 38mmØ

R.P.M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2800. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2800

SOUND PRESSURE LEVEL . . . . . . . . . . . . . . 88dbA . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88dbA

SOUND POWER LEVEL . . . . . . . . . . . . . . . . 98dbA . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98dbA

WEIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13kg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15kg

DECLARATION OF CONFORMITY

We Draper Tools Ltd. Hursley Road, Chandlers Ford, Eastleigh, Hampshire. SO53 1YF. England.

Declare under our sole responsibility that the product:

Stock No. 56635 & 56636 Part No. GS1500 & GS1800

Description: GARDEN SHREDDERS

To which this declaration relates is in conformity with the following directive(s):
98/37/EEC, 73/23/EEC & 89/336/EEC.

With reference to: EN60335-1 & DIN11004-1

JOHN DRAPER
Managing Director

02/99

GUARANTEE

Draper machine tools have been carefully tested and inspected before shipment and
are guaranteed to be free from defective materials and workmanship for a period of 12
months from the date of purchase except where tools are hired out when the guarantee
period is reduced to ninety days from the date of purchase.
Should the machine develop any fault, please return the complete tool to your nearest
authorized warranty repair agent or contact Draper Tools Limited, Hursley Road,
Chandler’s Ford, Eastleigh, Hampshire, SO53 1YF. England.
Telephone: [phone].
If upon inspection it is found that the fault occurring is due to defective materials or
workmanship, repairs will be carried out free of charge. This guarantee does not apply
to normal wear and tear, nor does it cover any damage caused by misuse, careless or
unsafe handling, alterations, accident, or repairs attempted or made by any personnel
other than the authorized Draper warranty repair agent.
This guarantee applies in lieu of any other guarantee expressed or implied and
variations of its terms are not authorized.
Your Draper guarantee is not effective unless you can produce upon request a dated
receipt or invoice to verify your proof of purchase within the 12 month period.
Please note that this guarantee is an additional benefit and does not affect your
statutory rights.
Draper Tools Limited, Hursley Road, Chandler’s Ford,
Eastleigh, Hampshire. SO53 1YF. U.K.

DRAPER TOOLS LIMITED,

Hursley Road, Chandler's Ford,

Eastleigh, Hants. SO53 1YF. England.

Tel: [phone].

Fax: [phone].

©Published by Draper Tools Ltd.

No part of this publication may be reproduced,

stored in a retrieval system or transmitted in

any form or by any means, electronic, mechanical

photocopying, recording or otherwise without prior

permission in writing from Draper Tools Ltd.

YOUR DRAPER STOCKIST