Draper FP1 Instruction Booklet

12V/24V DUAL VOLTAGE

DIESEL FUEL

TRANSFER PUMP

■ STOCK No.65673 ■ PART No.FP1

• INSTRUCTIONS •

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE

SAFE AND EFFECTIVE USE OF THIS TOOL.

GENERAL INFORMATION

This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which
should be kept with the machine.

This manual describes the purpose for which this tool has been designed and contains all the necessary
information to ensure its correct and safe use.We recommend that this manual is read before any operation of
the machine, before performing any kind of adjustment to the machine,and prior to any maintenance tasks. By
following all the general safety instructions contained in this manual, it will ensure both machine and operator
safety,together with longer life of the tool itself.

All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
machine.

05/2001

12V/24V DUAL VOLTAGE

DIESEL FUEL

TRANSFER PUMP

■ STOCK No.65673 ■ PART No.FP1

CONTENTS:

Page No.

Contents/Declaration ...................................................................................... 1

Specification/Guarantee ................................................................................. 2

Safety Instructions .......................................................................................... 3

Getting to know your pump ............................................................................ 4

Assembly......................................................................................................... 5

Operation and Use ....................................................................................... 5-6

Trouble Shooting ............................................................................................ 7

Accessories .................................................................................................... 8

We
Draper Tools Ltd. Hursley Road, Chandler’s Ford, Eastleigh, Hampshire.
SO53 1YF. England.

Declare under our sole responsibility that the product:

Stock No.:- 65673.
Part No.:- FP1.
Description:- Diesel Fluid Transfer Pump.

To which this declaration relates is in conformity with the following directive(s)
98/37/EC, 89/336/EEC, 73/23/EEC.
With reference to: EN60204-1, EN60529, EN55011 & EN50081-2.

JOHN DRAPER
Managing Director 17/05/2001

DECLARATION OF CONFORMITY

- 1 -

- 2 -

The Draper Tools policy of continuous improvement determines the right to change specification
without notice.

Stock No ................................................................................................................65673

Part No ......................................................................................................................FP1

Hose length ................................................................................................................4m

Volts (D.C.) ............................................................................................................12/24V

Watts ..................12V ..................................................................................................192

..........................24V ..................................................................................................624

Amps ................12V ....................................................................................................16

..........................24V ....................................................................................................26

RPM ..................12V ................................................................................................1400

..........................24V ................................................................................................2200

Litres / min ........12V ....................................................................................................30

..........................24V ....................................................................................................37

Weight ......................................................................................................................10kg

Dimensions ............................................................................................390x390x220mm

Sound power level ..............................................................................................70db(A)

Note: Maximum running time at 24V is 10mins

SPECIFICATION

GUARANTEE

Draper pumps have been carefully tested and inspected before shipment and are guaranteed to
be free from defective materials and workmanship for a period of 12 months from the date of
purchase except where pumps are hired out when the guarantee period is ninety days from the
date of purchase.

Should the pump develop any fault, please return the complete tool to your nearest authorized
warranty repair agent or contact Draper Tools Limited, Chandler's Ford, Eastleigh, Hampshire,
SO53 1YF. England. Telephone: [phone]

If upon inspection it is found that the fault occurring is due to defective materials or workmanship,
repairs will be carried out free of charge. This guarantee does not apply to normal wear and tear,
nor does it cover any damage caused by misuse, careless or unsafe handling, alterations, accident,
or repairs attempted or made by any personnel other than the authorized Draper warranty repair
agent.

This guarantee applies in lieu of any other guarantee expressed or implied and variations of its
terms are not authorized.

Your Draper guarantee is not effective unless you can produce upon request a dated receipt or
invoice to verify your proof of purchase within the 12 month period.

Please note that this guarantee is an additional benefit and does not affect your statutory rights.

Draper Tools Limited

- 3 -

WARNING

Please read the following instructions carefully, failure to do so could lead to serious personal injury.

IMPORTANT

Draper Tools Limited recommends that this machine should not be modified or used for any application
other than that for which it was designed. If you are unsure of its relative applications do not hesitate to
contact us in writing and we will advise you.

1. Keep out of the reach of children.

2. The diesel transfer pump is designed specifically for the transfer of diesel only from reservoirs,
tanks and drums. It is strictly forbidden to use this pump to transfer other liquids, for example:
petroleum, alimentary liquids, explosive, corrosive or other flammables.

3. This pump is not designed for use in explosive environments.

4. Do not operate this pump in close proximity to flammable liquids.

5. Only connect the pump to a battery in a well ventilated and lit area.

6. When transferring diesel always wear oil resistant gloves, and wash hands with soap and water
after.

7. Never connect the pump to a battery charger or to a current generator.

8. Always use the pump on a level and secure surface, close to the source.

9. Always clear up diesel spillages,to avoid creating dangerous surfaces and pollution.

10. Do not operate this pump below -10°C as diesel freezes.Do not expose the pump to direct sunlight
or temperatures exceeding 40°C.

11. In the event of a fire never extinguish with water.Extinguish using CO

2

powder fire extinguisher.

12. Never operate the pump around naked flames or when smoking.

13. If diesel comes in contact with eyes, rinse immediately under cool running water and seek medical
attention.

14. If diesel is swallowed, seek medical attention immediately.

SAFETY INSTRUCTIONS

- 4 -

GETTING TO KNOW YOUR
DIESEL TRANSFER PUMP.

Fig 1.

Fig 1.

1. Main pump unit carrying handle. 6. Trigger lock.

2. Inlet connection. 7. Hose clamps.

3. Outlet connection 8. Pick up filter.

4. Battery connections 9. 4 metre hose.

5. Filling gun assembly 10. On/Off button.

✕✌

✖✌

✗✌

✘✌

✙✌

✚✌

✛✌

✜✌

✢✌

✕✔✌

ASSEMBLY

- 5 -

FILTER AND INLET HOSE (FIG 2.)

The transfer pump is supplied with a single 4
metre length of hose, which can be cut to suit the
application best. (Recommend Draper Hose
Cutters Stock No. 54465).With the hose trimmed
accordingly, attach one end to the pump inlet and
the other to the pick-up filter. Secure in place with
the hose clips.

Note: See optional accessories (page 8) for
additional hose.

Fig 2.

Fig 3.

FILLING GUN AND OUTLET HOSE (FIG 3.)

The outlet hose is fitted onto the filling gun and
the pump connection in the same manner. Ensure
all the hose clips are tight to avoid leakage of
diesel during pumping.

OPERATION & USE

Fig 4.

CONNECTING TO POWER SUPPLY (FIG 4.)

For optimum pump use a fully charged battery.
(Recommend Draper Battery Analyser Stock No.

65979). The battery must be 40Ah or larger and

fully charged to work the pump comfortably.
Ensure the pump is switched off before use. In a
well ventilated area connect the pumps cables as
follows:

Red to battery positive (+) and black to battery
negative (-). ensure a good clean connection has
been made.

- 6 -

OPERATION AND USE

WARNING: Diesel is carcinogenic, wear

protective clothing to avoid contact with skin.
Prior to pumping, ensure the transfer pump is on a
level stable surface, the filter is submerged in the
source tank and the filling gun is in the filler
nozzle of the vehicle. (Fig 5.)

Fig 5.

Fig 6.

SWITCH ON/OFF (FIG 6.)

Ensure the trigger on the filling gun is not in the
on position. Switch the transfer pump ‘on’ by
pulling knob ✪✌upwards.

To switch the pump off, push knob ✪✌downwards.

Note: The pump is self priming.

The maximum running time for 24V is 10 minutes.
take care not to flatten the battery on your vehicle.

✪✌

Fig 7.

PUMPING (FIG 7.)

To begin fluid transfer, insert the nozzle ✫✌into
the desired aperture, pull back the trigger ✬✌.It
is possible to lock the trigger back using lock
✭✌. To do so pull trigger ✬✌fully back, press
button ✭✌, release trigger ✬✌, release button
✭✌. The fluid will continue transferring until the
trigger is pulled back fully, releasing the lock.

✬✌

✭✌

✫✌

- 7 -

TROUBLE SHOOTING

TROUBLE PROBABLE CAUSE REMEDY

The motor does Lack of current. Check connections

not operate. to battery, check

charge condition.

Faulty motor. Contact service

agent/distributor.

Pumping capacity Level in supply Refill tank.

reduced. tank low.

Intake filter Clean/replace

blocked. filter.

Excessive height Lower the

of suction. pump unit.

Air in suction Check filter is

hose. fully submerged.

Check intake

hose for damage.

Leaking fluid. Check pump

connections.

Before attempting any troubleshooting, repair or maintenance procedures, ensure the pump is empty of diesel,
disconnected from the power supply and in a well ventilated area.

Note:Wear protective gloves.

- 8 -

OPTIONAL ACCESSORIES

Stock No.:- 66340.
Part No.:- Y0201015000000.
Description:- 4 Metre Hose.

Stock No.:- 66342.
Part No.:- Y0121500700000
Description:- Suction Filter.

- 9 -

NOTES

- 10 -

NOTES

DRAPER TOOLS LIMITED,

Hursley Road, Chandler's Ford, Eastleigh, Hants. SO53 1YF. U.K.

Helpline: [phone].

Sales Desk: [phone].

General Enquiries: [phone].

Fax: [phone].

http://www.draper.co.uk
e-mail: [e-mail]

©Published by Draper Tools Ltd.

No part of this publication may be reproduced,

stored in a retrieval system or transmitted in

any form or by any means, electronic, mechanical

photocopying, recording or otherwise without prior

permission in writing from Draper Tools Ltd.

YOUR DRAPER STOCKIST