Draper EZ FOLD TF-20 User Manual

EZ Fold® TF-20
Basketball Backstop—Ceiling-Suspended, Forward-Folding, Front-Braced
by
Top-of-T
4" OD 11 ga. tubing
Side Brace
2¼" OD 14 ga. tubing
Main Stem
6" OD 11 ga. tubing
C
to C
L
A
hangers
L
1. Superstructure supplied for existing conditions.
2. Contact Draper for Dimensions A & B.
To Winch
¼" Aircraft cable (7000#)
Jackknife (adjustable) 2¼" OD 14 ga. tubing
2½" OD 13 ga. tubing
Shown with Rectangular Glass Bank (72" x 42")
Main stem
Direct Mount goal brace
10'0" to
finished floor
Side View/Goal Brace Detail "Goal Brace" feature attaches directly behind goal mounting plate and directly to main stem of backstop, which eliminates strain on backboards.
Draper offers a 25-year limited warranty on the EZ Fold bas ket ball backstop structure. No other bas ket ball back stop man u fac tur er offers you this protection. For a copy of the EZ Fold back stop warranty in its entirety, contact Draper, Inc.
Padding
Face of bank to CL of stem Bank No. & Type Dim. C Dim C w/o Ht. Adj w Ht. Adj
503152 72" x 48" Rect. Glass 11 503136 72" x 42" Rect. Glass 11 503151 72" x 48" Rect. Wood 11 503140 72" x 42" Rect. Wood 10 503153 72" x 48" Rect. Fiberglass 10 503144 72" x 42" Rect. Fiberglass 10 503154 72" x 48" Rectangular Steel 10 503167 72" x 42" Rectangular Steel 10 5031500 Fan Glass 11" 11 503148 Fan Fiberglass 10 503143 Fan Aluminum 10
1
/4" 1115/16"
1
/4" 1115/16"
1
/8" 113/16"
9
/16" 111/4"
1
/2" 113/16"
1
/2" 113/16"
1
/2" 113/16"
1
/2" 113/16"
1
/2" 113/16"
3
/16" 107/8"
13
/16"
PROJECT:
®
Copyright © 2011 Draper Inc. Form EZ-TF-20_Sub11 Printed in U.S.A.
CONTRACTOR:
SUPPLIER:
DATE:
REVISED:
Basketball Backstop—Ceiling-Suspended,
9
EZ Fold® TF-20
Forward-Folding, Front-Braced
Specifi cations—EZ Fold TF-20
Ceiling-Suspended, Forward-Folding Backstop (Under 28'-4")
page 2 of 2
Product Description
Basketball backstop shall be the EZ FOLD TF-20, ceiling-suspended, forward­folding as manufactured by Draper, Inc. of Spiceland, IN and shall be installed at locations shown on customer approval plan. Backstops shall be a welded together main frame constructed from steel me chan i cal tubing to form a rigid tetrahedral “T” design of back-to-back right triangles. The main stem (center strut) shall be 6" OD 11-gauge steel tubing, the top of the “T” shall be 4" OD 11-gauge steel tubing, and the side braces shall be 2¼" OD 14-gauge steel tubing. Side braces shall join stem no higher than 4'-6" above goal. The main stem shall be of suffi cient length to allow plus or minus 6" height adjustment of either fan or rectangular banks. The folding front brace shall be jackknife type, fully adjustable, self-locking in the down position and constructed of 2½" OD 13-gauge (outer) steel tubing and 2¼" OD 14-gauge (inner) steel tubing. The backstop shall be supported from 4" OD 11-gauge steel mechanical tubing (as shown on plans) anchored to roof structure by means of heavy steel support hangers. Superstructure tubes shall be reinforced with bridging and/or bracing when truss centers exceed 8'-0". Pivot or hinge joint (pin height) for folding shall not exceed 15" from roof structure except when required by architect for coordination with other trades. The main backstop frame shall pivot on 1¼" minimum solid steel shaft secured in a milled bearing hole in ½" minimum steel plate hangers to insure accurate positioning of bank. The bank shall be attached to the 6" OD main stem by heavy-duty bank hang­ers. Hangers shall be constructed of 2¼" OD 14-gauge steel tubing and ¼" x 2" fl at steel plate with slotted holes for lateral adjustment. All glass banks shall have one upper bank hanger and include a goal brace which attaches directly to the goal mounting plate and directly to the 6" main stem of the backstop to eliminate any strain on the bank and help prevent glass breakage. This direct mount feature shall conform to NCAA recommendation No. 5-F (dated Mar. 82) which states that the design of the unit shall transfer the load on the goal directly to the backboard support so as to minimize stress to the glass backboard. Backstop is raised or lowered by a ¼" (6.35 mm) aircraft cable, certifi ed minimum break strength of 7,000 pounds (3178 kg), operating over aluminum alloy sheaves with bronze oilite bearings that do not require lubrication.
Backstop shall have a black or white powder coat fi nish. Other colors optionally available: contact Draper for details.
Operation: Backstop shall be operated by 503085 motorized winch or 503086 manually operated winch. For complete specifi cations, see separate sheets.
Options
Backstop can be provided with any of several different styles of backboards, goals and padding. Specify types desired. See separate sheets.
Accessories
Smart Gym Control System. For group control of Basketball Backstops with Elec tric Winches, Electric Divider Curtains, Electric Height Adjusters and other Auxiliary Devices. For complete specifi cations, see separate sheet.
503060 EZ Power Wireless Remote Control. For remote control operation of electric winch. For complete specifi cations, see separate sheet. 503029 Posilok™—Safety belt to automatically lock basketball back stop in position due to a sudden surge of speed created by a possible malfunction of the hoisting apparatus. For complete specifi cations, see separate sheet. 503049—Portable Operator—To operate manual winch with heavy-duty electric drill. For complete specifi cations, see separate sheet.
Height Adjusters (see separate sheets):
503093— For motorized 8'-10' Height Adjustment of rectangular bank. 503097— For motorized 8'-10' Height Adjustment of fan bank. 503095— For motorized 8'-10' Height Adjustment of rect an gu lar bank with
wireless remote control. 503098— For motorized 8'-10' Height Adjustment of fan bank with wireless remote control. 503096— For motorized 8'-10' Height Adjustment of rectangular bank with EZ Stick Power Wand. 503099— For motorized 8'-10' Height Adjustment of fan bank with EZ Stick Power Wand.
503092— For manual 8'-10' height adjustment of rectangular backboards. 503094— For manual 8'-10' height adjustment of fan backboards. 503003—Portable Height Adjuster Operator—Speed controlled battery
powered operator for manual height adjusters. For complete specifications, see separate sheet.
LEED® Submittal Information
MRc4 – Recycled Content Post Consumer Average 51.21% Post Industrial 0%
MRc5 – Regional Materials Raw materials are commodity items from multiple
Credit Measure
sources so extraction point cannot be determined. Final Manufacturing/Assembly in Spiceland, IN
47385.
Downloadable 3-part specifi cations are available at www.draperinc.com.
www.draperinc.com
(765) 987-799
Loading...