Page 1
Assembly/Installation Instructions
t
Orbiter Projector Lift Plenum Housing by Draper
5
11
7
8
Plenum
Knock-out
for cable entry
9
4
1
Installing Optional Plenum Housing
The Plenum Housing is shipped in pieces, and must be assembled by the installer. It is recommended that an access panel be
installed in the ceiling to allow future access.
➀ Attach Plenum panels to projector lift (see above drawing).
➁ Attach assembly to overhead structure. Allow clearance between
plenum top and structure for ease of future access.
➂ Knock-outs are provided to allow cables in and out of plenum
housing.
Item Quantity Description
1 1 Orbiter
2 1 Orbiter plenum (individual pieces listed below)
3 2 End Plenum Panel
4 1 Front Plenum Panel
5 1 Top Plenum Panel
6 1 Lower Large Plenum Panel
7 1 Lower Small Plenum Panel
8 1 Rear Side Plenum Panel
9 26 #8-32 x.375 Zinc Hex Head Screw/Washer
10 8 #10-32 x.375 Zinc Hex Head Screw/Washer
11 26 #8-32 Zinc Keps Nu
Plenum
Knock-out
for cable entry
6
Item Quan
3
1 1
2 1
t
Copyright ©2006 Draper Inc. Form OrbiterPlenum_Inst06 Print ed in U.S.A.
If you encounter any diffi culties installing your Orbiter Plenum
Housing, call your dealer or Draper, Inc. in Spiceland, In di ana, 765987-7999, fax 765-987-7142, or E-mail [email protected].
Loading...