Page 1
TECHNICAL DATA SHEET
OptiView
SELF-SUPPORTING SCREEN SURFACES
Matt White XT1000E
Extra Wide Viewing Cone / Typical Contrast / On-Axis Gain of 1.0
The standard to which all other screen surfaces are compared. Preferred viewing surface in educational and commercial markets. A matt white surface diuses projected light in all directions, so the image can be seen from any angle.
Oers accurate color rendition, and superior clarity due to its smooth, non-embossed surface. Requires adequate provision for the control of ambient light in the audience area. Unity gain with a panoramic 180° cone. This surface is
GREENGUARD Children and SchoolsSM certied.
OptiView Family of Surfaces
OptiView surfaces are self-supporting and do not require tensioning to lay at. These front projection surfaces are
generally installed on operable roller screens with a dowel. Most surfaces in this group have a tearproof berglass base
textile. OptiView surfaces are extremely sturdy and suitable for use in a variety of settings.
Surface Characteristics
• Maximum Height Without Seams: 120”
• Weight (g/sm): 515
• Thickness (mm): 0.30
• Cleaning: Mild soap and water
• Flame Retardant Standard: NFPA-701
• Composition: Fiberglass base laminated with
PVC. Composition may dier slightly for some
screen sizes/models.
Draper, Inc. 411 S. Pearl St. Spiceland, IN 765-987-7999 www.draperinc.com Form: 10-110_3-12
SCREEN SURFACE
Reective Performance*
• Gain Chart—See below
0º Gain: 1.0
Half Gain Angle: No half-gain angle
*Individual test results may vary. Results based on a representative
sample in Draper inventory.
0º GAIN: 1.0, VIEWING CONE: 180
º
PROJECTION
3.50
3.25
3.00
2.75
2.50
2.25
2.00
1.75
GAIN
1.50
1.25
1.00
0.75
0.50
0.25
0.00
60º55º50º45º40º35º30º25º20º15º10º5º0º5º10º15º20º25º30º35º40º45º50º55º60
SOURCE
VIEWING ANGLE
GAIN CHART — MATT WHITE XT1000E
º
Loading...