Page 1
by
Introducing an important new improvement in spring roller design.
Now available as an optional upgrade on selected models of Draper walland ceiling-mounted screens, the AutoReturn spring roller includes a built-in
inertia reduction mechanism. With AutoReturn the screen unrolls in the
conventional manner, then slowly and gently retracts to the closed position on
its own after a simple tug on the handle.
Features
• Viewing surface pulls down easily, like a standard spring roller
operated projection screen.
• Return the screen to the case with a simple pull—no repetitive
tugging or downward momentum is required to engage the
AutoReturn Roller.
• Screen surface retracts slowly and smoothly into the case, slowing
even more as it approaches its upper limit.
• Intermediate stop positions allow you to lower or raise the screen
completely, or stop at any point in between.
• Prevents potential damage to the dowel or screen surface through
repeated impact with the case.
• Cost-effective solution.
• Available in all existing sizes and fabrics for each model of projection
screen shown below.
• Patent Pending
Models
AutoReturn is available on these models of Draper
Manual Projection Screens:
Salara/Series M
Silhouette/Series M
Access/Series M
Luma 2
Luma
Contains 25% PCW
411 S. Pearl St., Spiceland, IN 47385 USA www.draperinc.com
765-987-7999 fax 765-987-7142
Copyright © 2008 Draper, Inc. Form: AutoReturn_Flyer_08 Printed in U.S.A.
Recycled Content
Loading...