Draper 63196, AWL18 Instruction Booklet

SPECIFICATION

Thickness - table ................................................................................................................................ 2.0mm

- legs ................................................................................................................................. 1.5mm

Weight ................................................................................................................................................... 19kg

ASSEMBLY

FASTENING THE WOOD LATHE STAND TO
FLOOR/SUPPORTING SURFACE

FASTENING YOUR WOOD LATHE TO THE STAND

UNPACKING

WOOD LATHE STAND

■ STOCK No.63196 ■ PART No.AWL18

Carefully unpack the wood lathe stand and all contents from the carton. Check that all the parts are
present (see assembly).

To assemble the wood lathe stand use the illustration below ensuring all nuts and bolts are fully
tightened.

The wood lathe stand should always be fastened to the floor or a supporting surface.To fasten the stand
select four suitable fixing bolts, (not supplied) and secure.

The wood lathe stand is suitable for WTL30/WTL100A variable speed wood lathes. Place the wood lathe
on the stand and mark where the wood lathe fixing holes are required, drill to size and fasten using
suitable nuts and bolts (not supplied).

DRAPER TOOLS LTD, HURSLEY ROAD, CHANDLER'S FORD, EASTLEIGH, HANTS. SO53 1YF. U.K. www.draper.co.uk e-mail: [e-mail]

✔✕✌

✔✚✌

✔✖✌

✔✗✌

✔✙✌

✔✘✌

Key Description Qty Part No. Stock No.
01 2 YAWL18-01 64738
02 4 YAWL18-02 64739
03 1 YAWL18-03 64740
04 2 YAWL18-04 64741
05 4 YAWL18-05 64742
06 2 YAWL18-06 64743
* 1 YAWL18-07 64744

Top
Leg

Centre supp.

Cross brace

Angle

Cross brace

Fixings