DRAPER Access/V (16:10) 277/109"" 146*233 XT1000V (M1300) ebd 12, Access/V (16:10) 239/94"" 127*203 XT1000V (M1300) ebd 12 AccessV_Sub.pdf

Ceiling recess case now. Install screen/roller

Access/Series V

Specifications—Access/Series V

Projection screens, size ___________________ h. x
_____________________ w., recessed ceiling mounting. Case
back, top, and front constructed of steel. Endcaps are steel. Bottom
panel forms slot for passage of viewing surface, easily removable
for access. Symmetrical housing to allow for left or right-hand motor
location, and for viewing surface to unroll from the back or front of the
roller. Case to include bottom flange for trim around edges of ceiling
opening. Case may be mounted with 3/8" threaded rod, with lag screws through
brackets, or with wire in a grid ceiling. Mounting brackets slide in 18" long channels
on top of case, allowing brackets to be moved to avoid interference with conflicting
building structures. Brackets may be locked in position by tightening screws.
Brackets may also be angled to meet installation requirements.

Roller/fabric assembly may be installed in case at factory or job site. Brackets
supporting roller/fabric assembly to slide in track inside top of case, allowing
viewing surface to be centered in case regardless of screen size. Roller of 3" dia.
steel. Top of HDTV and 16:9 format viewing surfaces through 110" diagonal masked
by 12" black drop. Viewing surface flame and mildew resistant. Matt White XT1000V
and Contrast Grey XH800V viewing surfaces are certified to GREENGUARD
standards for low chemical emissions into indoor air during product usage.
For more information, visit ul.com/gg.

Please Mark aPProPriate selections

Select Shipping Option:

Case Now, Screen Assembly Later 1
Complete Unit Now

Select Case Color:

White (standard)
Black (optional)

Select Viewing Surface:

Matt White XT1000V (1.0 gain): GREENGUARD Gold certified
Grey XH600V (0.6 gain) (Thru 9' x 12'): GREENGUARD Gold certified
Pearl White MH1500V (1.5 gain) (Thru 9' x 12'): Optional
Pure White XT1300V (1.3 gain): Optional
Rear Projection Surface: Optional ___________________________________
Other__________________________________________________________

Select Motor and Controls:

Standard Voltage Motor and Control Options:

110-120V AC (standard)
Optional Quiet Motor

Please Note: These motors come with one 110V-120V AC 3-position wall switch
(silver wall plate with black rocker).

Total number of 110-120V AC switches (operate independently)
Substitute white switch(es) for silver wall plate with black rocker
Optional Key Operated Switch
Power Supply Key Switch (On-off)
3-Position Key Control
3-Position Switch with Hinged Key-Locking Coverplate

Low Voltage Motor and Control Options:

Built-In LVC-IV Low Voltage Control Module
Optional External LVC-IV Low Voltage Control Module
Optional Motor with Internal Low Voltage Controller
Optional Quiet Motor with Internal Low Voltage Controller

Please Note: Select Control Options for Low Voltage from below.

24 Volt 3-Button Switch Number of 24V switches:
Radio Frequency Remote Control (only with 24v)
Infrared Remote Control (only with 24v)
Optional Key Operated Switch
Power Supply Key Switch (On-off)
3-Position Switch with Hinged Key-Locking Coverplate

Select Motor Location:

Left end (standard)
Right end

Optional Accessories:

Additional set of mounting brackets for alternate mounting (see page 2)
Additional Drop (Beyond standard 12")
Total Drop (Standard 12" + Additional drop) (Total screen height

cannot exceed 12')

Black (standard)
Same color as viewing surface

2

1

1, 3

5

assembly later at job site

Electrically operated 110-120V AC, 60 Hz. 4-wire motor mounted inside screen
roller, 1.1 amp current draw, instantly reversible, lifetime lubricated, with internal
thermal overload protector and electric brake,standard motor with preset accessible
switches. Optional Quiet Motor operates at 44 Db (motor noise is approximately
30% less than standard tubular motors). Housing to feature internal junction box,
allowing it to be installed and wired to building supply wires at an early stage of
construction. Junction box to have plug-in style connector, accepting the mating half
of the connector from the motorized roller/fabric assembly. 3-position control switch
(or switches—specify number) to stop or reverse screen at any point. Switch(es)
furnished with cover plate. Patented by Draper, Inc. (U.S. Patent Nos. 6,137,629;
6,421,175; 6,532,109; 6,816,308; 7,559,707.)
Entire unit certified by Underwriters’ Laboratories for the U.S. and Canada.
Plenum rated case (UL approved “Suitable for Use in Environmental Air Space”).

Downloadable 3-part specifications are available at www.draperinc.com.

Specifications subject to change without notice.

Dimensions & Data

Size Case Dowel Net Wt. Qty.
H x W Length 5 Length (lbs.)

Audio Visual Format

96" x 96" 123" 1103/8" 95
7' x 9' 136" 1207/8" 95
9' x 9' 136" 1227/8" 99
8' x 10' 147" 1343/8" 131
10' x 10' 150" 1365/8" 109
9' x 12' 172" 1587/8" 110
12' x 12' 175" 1623/8" 121
10' 6" x 14' 198" 184½" 235
14' x 14' 206" 1903/8" 247
12' x 16' 223" 210¼" 264

Nominal Image Case Dowel Net Wt. Qty.
Diagonal Area Length 5 Length (lbs.)

NTSC Video Format (4:3)

150" 87" x 116" 143" 1303/8" 104
15' 108" x 144 172" 1587/8" 110
200" 118" x 158" 188" 1745/8" 135
210" 126" x 168" 198" 184½" 235

220" 132" x 176" 206" 192½" 244
240" 144" x 192" 223" 210

HDTV Format (16:9)

133" 65" x 116" 143" 1277/8" 89
161" 79" x 140" 168" 1527/8" 110
184" 90" x 160" 187" 1743/8" 135
193" 94½" x 168" 195" 1823/8" 235
220" 108" x 192" 223" 2067/8" 244

16:10 Format

137" 72½" x 116" 143" 1257/8" 89
165" 87½" x 140" 168" 1543/8" 106
189" 100" x 160" 187" 1743/8" 153
198" 105" x 168" 196" 1827/8" 230
226" 120" x 192" 223" 2081/2" 260

Custom Size

1

Please note: When ordering a motor with built-in Low Voltage Controller, if the case ships

separate from the "guts," the case includes the 25' cable and special low voltage switch.

2, 3

For size limitation charts for Quiet Motors and Quiet Motors with Built-In Low-Voltage

Controller, see below.

4

Factory-installed VIC will not increase overall case lengths shown at right.

5

Extra drop increases case and dowel length. Specify at time of order and contact Draper
if this dimension is critical. Case sizes include 1" flange on each end of case. Subtract
1½" for rough ceiling cutout size.

Also available in 1.85:1, 2.35:1 and 15:9 Formats. Contact Draper.

PROJECT:

by

1

/4" 264

2 Quiet Motor Size Limitations

AV NTSC HDTV 16:10

108" x 144" 180" 161" 165"

3 Quiet Motor with Low Voltage Controller Size Limitations

AV NTSC HDTV 16:10

96" x 96" 11' 119" 123"

Copyright © 2016 Draper Inc. Form AccessV_Sub16 Printed in U.S.A.

ARCHITECT:

CONTRACTOR:

SUPPLIER:

DATE: REVISED:

Access/series V by DrAper

www

9

18”

Single Station Control

Internal Screen Wiring

White (Common)

Black (Down)

Red (Up)

Green (Ground)

Dashed wiring
by electrician

Control
switch

Single gang box by others
Min. 4" x 2

1

/8" x 1

7

/8" deep

Red

Black

Blue

Location of key
operated on-off
switch if furnished

To 110-120V Line

Multiple Station Control

Internal Screen Wiring

White (Common)

Black (Down)

Red (Up)

Green (Ground)

Dashed wiring
by electrician

Red

Red

Black

Blue

Blue

Cap off with wire
nut and tape

Black

Red

Blue

Black

Single gang box by others
Min. 4" x 2

1

/8" x 1

7

/8" deep.
3 shown. More or less equally
feasible.

Location of key
operated on-off
switch if furnished

To 110-120V Line

Single Low Voltage Control

Multiple Low Voltage Controls

7

/

8

"

ELECTRICAL
CUTOUT

110-120V Motor

110-120V Quiet Motor with Internal Low Voltage Controller

c

Ase Dimensions AnD methoDs of instAllAtion

91/8”

1

1

/8”

2”

½”

7

/16”

5

/8”

LEVELING BRACKET**

18”

¾”

13/8”TYP

Center

pAge 2 of 2

7

/8”

of Case

73/8”

7

/8”

4¾”

5

/8”

6½”

1

8

/16”

Standard Motor Wiring is on the

AUDIENCE LEFT END of Access Case.

13

6

/16”

L*

11

/16”

*L = Varies

For ceiling cutout subtract 1½" from case length and width (measured from outer edge of flanges).

**There are several knock-outs in the screen housing to allow the Leveling Bracket to be adjusted laterally (up to 16" in either direction)

Alternate

Installation
Typical
Installation

Standard Motor Wiring is on the AUDIENCE LEFT END of Access Case.

1

With typical installation, brackets may be angled to meet installation requirements.

1

(additional set of

brackets required

but not included)

Wiring DiAgrAms

110-120V Motor and Quiet Motor

7

1

/16"

3

/8"

8”

67/8”

Mounting Bracket Dimensions

7

1

/8"

1

/2"

1

/4"

R

1

/8"

1

/4"

TYP.

9

TYP.

/16"

2

R

3

/16"

213/16"

110-120V Motor and Quiet Motor

(Internal Low Voltage Controller)

L*

11

/16”

21/8”

7

1

/8"

1

/2"

1

9

/16"

TYP.

3

/8"

3

7

/8

"

7

1

/8"

9

/4"

TYP.

Please Note:

For external low voltage (LVC-IV), serial (LVC-IV) and network (LVC-IV) wiring
diagrams, please consult instructions for those modules.

.draperinc.com

Internal Screen Wiring

White (Neutral)

Black

Green/Yellow (Ground)

Dashed wiring
Dashed wiring
by electrician

To 110-120V Line

2

For more information and wiring diagrams for serial and network

Data Cable

connector

Wall Switch,

RF or IR

Receiver,

or integrated

control system

RJ-9

To 110-120V Line

by electrician

Internal Screen Wiring

White (Neutral)

Black

Green/Yellow (Ground)

Data
Cables

RJ-9

connectors

Wall Switches,

RF or IR

Receivers,

or integrated

control systems

communication, please see wiring diagrams supplied with individual items.

PROJECT:

SUPPLIER:

DATE: REVISED:

(765) 987-799