ULTRA-SLIM SINGLE FLUORESCENT
LAMP FITTING
■ STOCK No.63262 ■ PART No. LFU-20
63263 LFU-40
• INSTRUCTIONS •
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE
SAFE AND EFFECTIVE USE OF THIS TOOL.
GENERAL INFORMATION
This manual has been compiled by Draper Tools, which should be kept in a safe place.
This manual describes the purpose for which this lamp frame has been designed and contains all the necessary
information to ensure its correct and safe use.We recommend that this manual is read before any operation of
the lamp, before performing any kind of adjustment to the lamp, and prior to any maintenance tasks. By
following all the general safety instructions contained in this manual, it will ensure both lamp and operator
safety,together with longer life of the lamp itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
lamp frame.
Whilst every effort has been made to ensure accuracy of information contained in this manual,the Draper Tool
policy of continuous improvement determines the right to make modifications without prior warning.
09/2000
ULTRA-SLIM SINGLE
FLUORESCENT LAMP FITTING
■ STOCK No.63262 ■ PART No.LF-U20
63263 LF-U40
We
Draper Tools Ltd. Hursley Road, Chandler’s Ford, Eastleigh, Hampshire.
SO53 1YF. England.
Declare under our sole responsibility that the product:
Stock Nos:- 63262 & 63263.
Part Nos:- LFU-20 & LFU-40.
Description:- Fluorescent Lamp Frame.
To which this declaration relates is in conformity with the following directive(s)
73/23/EEC & 89/336/EEC.
With reference to: EN60598-1, EN50081-1, EN55022, EN61000-3-2/-3, EN50082-1,
EN61547, (EN61000-4-2/-3/-4/-5/-6/-11).
JOHN DRAPER
Managing Director Issue Date: 28/07/2000
DECLARATION OF CONFORMITY
- 1 -
SPECIFICATIONS:
1. Rated voltage: AC 220-230V~50Hz.
2. λ=0.90C, µ=0.95, Tc=50°C, prospective heat time > 0.4s unusual protection.
3. Products of LFU series are assembled with G13 lamp holder and T8 lighting tube
(not supplied). They are easy to carry and install, and can be connected together
to a maximum of 8 fittings.
t
a
25°C
IP30
F
- 2 -
1. Mark fixing holes in desired location on
mounting surface.
2. Connect the mains supply wire to the
relevent contact points in the terminal
block supplied.
3. Once all wiring connections are complete,
mount the lamp frame in the position
required, then carefully install the
fluorescent tube (not supplied).
4. If in doubt consult a qualified electrician for
advice or installation.
STOCK No.63262
1. Frame
2. End cover
3. Fluorescent tube (not supplied)
4. Terminal block
INSTALLATION
355mm
34mm
57mm
587mm
662mm
STOCK No.63263
967mm
34mm
57mm
1194mm
1230mm
DRAPER TOOLS LIMITED,
Hursley Road, Chandler's Ford, Eastleigh, Hants. SO53 1YF. U.K.
Helpline: (023) 8049 4344.
Sales Desk: (023) 8049 4333.
General Enquiries: (023) 8026 6355.
Fax: (023) 8026 0784.
www.draper.co.uk
e-mail: sales@draper.co.uk
©Published by Draper Tools Ltd.
No part of this publication may be reproduced,
stored in a retrieval system or transmitted in
any form or by any means, electronic, mechanical
photocopying, recording or otherwise without prior
permission in writing from Draper Tools Ltd.
YOUR DRAPER STOCKIST
Loading...