Page 1
12V DC
DIESEL FUEL/WATER
TRANSFER PUMP
54044
These instructions accompanying the product are the original instructions. This document is part of the product,
keep it for the life of the product passing it on to any subsequent holder of the product. Read all these
instructions before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been
designed, and contains all the necessary information to ensure its correct and safe use. By following all the
general safety instructions contained in this manual, it will ensure both product and operator safety, together
with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper
Tools policy of continuous improvement determines the right to make modifications without prior warning.
Page 2
1. TITLE PAGE
1.1 INTRODUCTION:
USER MANUAL FOR: 12V DC DIESEL FUEL/WATER TRANSFER PUMP
Stock No’s: 54044
Part No’s: BWP13
1.2 REVISIONS:
Date first published May 2018.
As our user manuals are continually updated, users should make sure that they
use the very latest version.
Downloads are available from: http://drapertools.com/manuals
Draper Tools Limited
Hursley Road
Chandler’s Ford
Eastleigh
Hampshire
SO53 1YF
UK
Website: drapertools.com
Product Helpline: +44 (0) 23 8049 4344
General Fax: +44 (0) 23 8026 0784
1.3 UNDERSTANDING THIS MANUALS SAFETY CONTENT:
WARNING! – Information that draws attention to the risk of injury or death.
CAUTION! – Information that draws attention to the risk of damage to the
product or surroundings.
1.4 COPYRIGHT © NOTICE:
Copyright © Draper Tools Limited.
Permission is granted to reproduce this publication for personal and educational
use only. Commercial copying, redistribution, hiring or lending is prohibited.
No part of this publication may be stored in a retrieval system or transmitted in
any other form or means without written permission from Draper Tools Limited.
In all cases this copyright notice must remain intact.
Page 3
2. CONTENTS
2.1 CONTENTS
1. TITLE PAGE
1.1 INTRODUCTION .................................................................................................................1
1.2 REVISION HISTORY ..........................................................................................................2
1.3 UNDERSTANDING THIS MANUAL..................................................................................... 2
1.4 COPYRIGHT NOTICE......................................................................................................... 2
2. CONTENTS
2.1 CONTENTS......................................................................................................................... 3
3. GUARANTEE
3.1 GUARANTEE ...................................................................................................................... 4
4. INTRODUCTION
4.1 SCOPE ................................................................................................................................5
4.2 SPECIFICATION .................................................................................................................5
4.3 HANDLING AND STORAGE ...............................................................................................5
5. HEALTH AND SAFETY INFORMATION
5.1 GENERAL SAFETY INSTRUCTIONS.................................................................................6
5.2 CONNECTION TO THE POWER SUPPLY.........................................................................6
6. TECHNICAL DESCRIPTION
6.1 IDENTIFICATION ................................................................................................................7
7. UNPACKING AND CHECKING
7.1 PACKAGING ....................................................................................................................... 8
7.2 WHAT’S IN THE BOX..........................................................................................................8
8. PREPARING THE PUMP
8.1 INSTALLATION.................................................................................................................... 9
9. TROUBLESHOOTING
9.1 TROUBLESHOOTING....................................................................................................... 10
10. MAINTENANCE
10.1 MAINTENANCE .............................................................................................................. 11
11. EXPLANATION OF SYMBOLS
11.1 EXPLANATION OF SYMBOLS........................................................................................12
12. DISPOSAL
12.1 DISPOSAL.......................................................................................................................13
DECLARATION OF CONFORMITY .............................................................................. ENCLOSED
- 3 -
Page 4
3. GUARANTEE
3.1 GUARANTEE
Draper tools have been carefully tested and inspected before shipment and are guaranteed to be
free from defective materials and workmanship.
Should the tool develop a fault, please return the complete tool to your nearest distributor or
contact:
Draper Tools Limited, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF. England.
Telephone Sales Desk: (023) 8049 4333 or:
Product Helpline (023) 8049 4344.
A proof of purchase must be provided.
If upon inspection it is found that the fault occurring is due to defective materials or workmanship,
repairs will be carried out free of charge. This guarantee period covering parts/labour is 12 months
from the date of purchase except where tools are hired out when the guarantee period is 90 days
from the date of purchase. The guarantee is extended to 24 months for parts only. This guarantee
does not apply to normal wear and tear, nor does it cover any damage caused by misuse, careless
or unsafe handling, alterations, accidents, or repairs attempted or made by any personnel other
than the authorised Draper warranty repair agent.
Note: If the tool is found not to be within the terms of warranty, repairs and carriage charges will be
quoted and made accordingly.
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its
terms are not authorised.
Your Draper guarantee is not effective unless you can produce upon request a dated receipt or
invoice to verify your proof of purchase within the guarantee period.
Please note that this guarantee is an additional benefit and does not affect your statutory rights.
Draper Tools Limited.
- 4 - - 13 -
Page 5
4. INTRODUCTION
4.1 SCOPE
This pump is designed to pump standard diesel fuel or water. Do not pump "diesel alternatives"
with this pump.
4.2 SPECIFICATION
Stock no. ............................................................................................................................. 54044
Part no. ............................................................................................................................... BWP13
Motor:
Rated voltage .................................................................................................................12V DC
Rated input ..........................................................................................................................50W
Maximum flow rate ..............................................................................................................30L/min
Power cable length..................................................................................................................... 3M
Suitable for what liquids .................................................................................... Diesel fuel & water
Dimensions............................................................................................... 51mmØ x 180mm height
Weight (machine) .................................................................................................................0.57kg
Supplied accessories: Hose (3M), hose clips x2, metal hose joining tube.
WARNING! Not to be used with petrol, alcohol or any other flammable liquid/fuel. Not for
use with bio diesel.
4.3 HANDLING AND STORAGE
When not in use this pump should be stored empty of any residual fluids. Ensure that the power
cable is stored in such a manner as to avoid any damage to the power cable.
Never carry the pump by holding its power cable. Never lift the pump by its power cable. When
lifting or carrying the pump be sure to hold the pump by its main body so as not to strain or
otherwise cause damage to the pumps power cable or water seals.
- 5 -
Page 6
5. HEALTH AND SAFETY INFORMATION
5.1 GENERAL SAFETY INSTRUCTIONS
1. Never use this pump with petrol, alcohol or any other type of flammable fuel or liquid.
2. Never operate this pump near any flammable liquids/fuels/gases.
3. Do not use to pump bio diesel as it can dry to a hard residue and impair the product.
4. When choosing a suitable site to use this product keep in mind that connecting the clamps of
the power cable can produce sparks. So keep away from any flammable liquids/fuels/gases.
5. Be aware of the safety guidelines for the safe use of batteries, contact the maker of your battery
for further information.
5.2 CONNECTION TO THE POWER SUPPLY
Ensure that the battery you use to power this pump is of a suitable type (12V).
Before connecting this pump to your chosen battery, ensure that the power switch is in the OFF
position.
Connect the black clamp to the negative terminal of your battery first, followed by the red positive
clamp to the batteries positive terminal.
- 6 - - 11 -
Page 7
6. TECHNICAL DESCRIPTION
6.1 IDENTIFICATION
Main pump body
Support feet
Outlet
Power cable
Impeller
Power switch
Battery terminal clamps
Hose clamps x2
Hose joining tube x1
Length of hose (3M)
- 7 -
Page 8
7. UNPACKING AND CHECKING
7.1 PACKAGING
Carefully remove the pump and accessories from the packaging and examine them for any sign of
damage that may have happened during shipping. Lay the contents out and check them against
the parts shown below. If any part is damaged or missing; please contact the Draper Helpline (the
telephone number appears on the Title page) and do not attempt to use the pump.
The packaging material should be retained at least during the guarantee period: in case the
machine needs to be returned for repair.
Warning! Some of the packaging materials used may be harmful to children. Do not leave any of
these materials in the reach of children.
If any of the packaging is to be thrown away, make sure they are disposed of correctly; according
to local regulations.
7.2 WHAT´S IN THE BOX?
As well as the pump; there are several parts not fitted or attached to it.
Hose clamps x2
Hose joining pipe x1
Hose 3M long
- 8 - - 9 -
Page 9
8. PREPARING THE PUMP
8.1 INSTALLATION - FIGS. 1-2
The pump should be installed standing
vertically in the liquid to be pumped. If the
liquid is clean with no debris the pump can
be placed at the bottom of the container and
pumping can commence (see fig.2).
If however there is any debris in the liquid to
be pumped you must place the pump on a
stable level surface situated so as to avoid
the pump sucking up any debris and
potentially damaging or jamming the pump.
Once the pump is installed into the liquid to
be pumped care must be used in the
position chosen for the placement of the
battery power source, the battery should be
located on a safe, stable and level surface
away from the liquid that is being pumped.
Care must also be exercised in making sure
that the power on/off switch is not
positioned so that it may get wet and / or
have liquids interfere with its operation.
CAUTION
During use the level of the fluid being
pumped should be monitored.
Failure to monitor the fluid level can result in
an insufficient fluid level for pumping to
continue, resulting in the motor racing and
damage to the pump. The minimum fluid
level required for pumping is 40mm.
FIG.1
Minimum
40mm
FIG.2
Page 10
9. TROUBLESHOOTING
9.1 TROUBLESHOOTING
WARNING: For your safety always turn the main switch on the machine "off" and remove the
battery clips from the power supply before carrying out any maintenance or trouble shooting.
Problem Cause Remedy
Pump fails to pump
1. Battery flat.
2. Battery connection fault.
3. Debris jammed in impeller.
1. Re-charge battery.
2. Re-check battery connections.
3. Check and extract any debris stuck
in impeller.
Pump operates at a
reduced flow rate
Pump turned on but
no liquid coming from
outlet pipe.
1. Impeller aperture blocked jammed
impeller.
1. Outlet hose detached from pump
outlet aperture.
1. Check and remove any debris
obstructing the impeller aperture or
impeller rotation.
1. Check and re-attach hose to pump
outlet pipe.
- 10 -
Page 11
10. MAINTENANCE
10.1 MAINTENANCE
After each use the pump and hose should be completely drained of fluids and allowed to dry prior
to storage.
The pump body should be cleaned with water and a cloth and the power cable inspected for
damage before storing until next use. When storing the kit lightly coat the hose clips in oil to
prevent rusting during storage. After use with diesel fuel, it is advisable to run the pump in clean
water for a few minutes to flush any residue from the pump.
Page 12
11. EXPLANATION OF SYMBOLS
11.1 EXPLANATION OF SYMBOLS
WEEE
Do not dispose of Waste Electrical & Electronic
Equipment in with domestic rubbish.
Warning! Read the instruction manual.
- 12 -
Page 13
12. DISPOSAL
12.1 DISPOSAL
At the end of the machine’s working life, or when it can no longer be repaired, ensure that it is
disposed of according to national regulations.
Contact your local authority for details of collection schemes in your area.
In all circumstances:
– Do not dispose of power tools with domestic waste.
– Do not incinerate.
– Do not abandon in the environment.
– Do not dispose of WEEE* as unsorted municipal waste.
* Waste Electrical & Electronic Equipment.
Page 14
NOTES
- 14 -
Page 15
NOTES
- 15 -
Page 16
CONTACTS
Draper Tools Limited, Hursley Road,
Chandler's Ford, Eastleigh, Hampshire. SO53 1YF. U.K.
Helpline: (023) 8049 4344
Sales Desk: (023) 8049 4333
Internet: drapertools.com
E-mail: sales@drapertools.com
General Enquiries: (023) 8026 6355
Service/Warranty Repair Agent:
For aftersales servicing or warranty repairs, please contact the
Draper Tools Helpline for details of an agent in your local area.
YOUR DRAPER STOCKIST
KCDH0518
©Published by Draper Tools Limited.
No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means,
electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.
Loading...