Draper 34390, PW2110, PW2000, 54435, PW2121 Instructions Manual

PRESSURE WASHERS

• INSTRUCTIONS •

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO

ENSURE THE SAFE AND EFFECTIVE USE OF THIS TOOL.

STOCK No.34390. PART No.PW2000.

STOCK No.38419. PART No.PW2110.
STOCK No.54435. PART No.PW2121.
STOCK No.52588. PART No.PW2130.

06/99

CONTENTS:

Specification/guarantee........................................................................................................................ 2

Unpacking and checking contents ....................................................................................................... 3

Power supply ....................................................................................................................................... 4

Safety warning/general safety instructions for machine tools .............................................................. 5

Additional safety rules for pressure washers ....................................................................................... 6

Know your pressure washer ................................................................................................................. 7

Assembly .......................................................................................................................................... 8-9

Operation (PW2000 and PW2110) ................................................................................................. 10-11

Operation (PW2130) ...................................................................................................................... 12-13

Maintenance ...................................................................................................................................... 14

Troubleshooting ................................................................................................................................. 15

Optional accessories .......................................................................................................................... 16

PRESSURE WASHERS

■ STOCK No.34390. ■ PART No.PW2000.

■ STOCK No.38419. ■ PART No.PW2110.

■ STOCK No.54435. ■ PART No.PW2121.

■ STOCK No.52588. ■ PART No.PW2130.

- 1 -

Page Nos.

We
Draper Tools Ltd. Hursley Road, Chandlers Ford, Eastleigh, Hampshire. SO53 1YF. England.

Declare under our sole responsibility that the products:

Part Numbers:- PW2000, PW2110, PW2121 & PW2130.

Stock Numbers: 34390, 38419, 54435 & 52588.

Description:- Pressure Washers.

To which this declaration relates is in conformity with the following directive(s) 89/392/EEC, 73/23/EEC &
89/336/EEC.

JOHN DRAPER
Managing Director 09/97

DECLARATION OF CONFORMITY

Draper machine tools have been carefully tested and inspected before shipment and are guaranteed to be
free from defective materials and workmanship for a period of 12 months from the date of purchase except
where tools are hired out when the guarantee period is reduced to ninety days from the date of purchase.

Should the machine develop any fault, please return the complete tool to your nearest authorized warranty
repair agent or contact Draper Tools Limited, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF. England.
Telephone: [phone].

If upon inspection it is found that the fault occurring is due from defective materials or workmanship,
repairs will be carried out free of charge. This guarantee does not apply to normal wear and tear, nor does
it cover any damage caused by misuse, careless or unsafe handling, alterations, accident, or repairs
attempted or made by any personnel other than the authorized Draper warranty repair agent.

This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are
not authorized.

Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to
verify your proof of purchase within the 12 month period.

Please note that this guarantee is an additional benefit and does not affect your statutory rights.

Draper Tools Limited

Whilst every effort has been made to ensure accuracy of information given in this manual is correct at the
time of going to print, the Draper Tools policy of continuous improvement determines the right to change
specification without notice.

SPECIFICATION

- 2 -

GUARANTEE

The typical sound pressure level of this tool is 79db(A).
The noise level whilst working could exceed 85db(A) - WEAR EAR PROTECTION.

Part No...............................................PW2000

Stock No. ..............................................34390

Motor: ..............................1350W-230V/50Hz

Flow Rate: ....................7.5L/min (450L/hour)

Working pressure - pump ....................80 bar

Max. pump pressure:..........................100 bar

Weight:................................................11.5kg

Part No...............................................PW2110

Stock No. ..............................................38419

Motor:..............................1650W – 230V/A.C.

Flow Rate: ....................7.5L/min (450L/hour)

Working pressure - pump ....................85 bar

Max. pump pressure:..........................110 bar

Weight:..................................................6.3kg

Part No...............................................PW2121

Stock No. ..............................................54435

Motor: ..............................2100W-230V/50Hz

Flow Rate:........................8L/min (480L/hour)

Working pressure - pump ..................130 bar

Max. pump pressure:..........................150 bar

Weight:................................................18.5kg

Part No...............................................PW2130

Stock No. ..............................................52588

Motor: ..............................2100W-230V/50Hz

Flow Rate:........................8L/min (480L/hour)

Working pressure - pump ..................120 bar

Max. pump pressure:..........................130 bar

Weight: ..................................................19kg

Carefully unpack the pressure washer and all the loose items from the carton. Fig.1. illustrates the
pressure washer and all the loose items that are packed in the carton.

UNPACKING AND CHECKING CONTENTS

Fig.1.

Now referring to Fig.1. carefully check that all the parts are present. Please contact the Draper Power
Helpline [phone] if you have any enquiries ie. problems with assembly, apparent
missing/damaged parts, help with accessories available or technical advice.

- 3 -

PW2000

PW2110

PW2121

PW2130

POWER SUPPLY

CONNECTING YOUR MACHINE TO THE POWER SUPPLY: (230V ONLY)

To eliminate the possibility of an electric shock your machine has been fitted with a BS approved, non
rewireable moulded plug and cable which incorporates a fuse, the value of which is indicated on the pin
face of the plug. Should the fuse need to be replaced an approved BS1362 fuse must be used of the
same rating, marked thus . The fuse cover is detachable, never use the plug with the cover omitted. If
a replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the
plug (i.e. red). Fuse covers are available from your Draper Tools stockist.
If the fitted plug is not suitable, it should be cut off and destroyed. *The end of the cable should now be
suitably prepared and the correct type of plug fitted. See below.

*WARNING:

A plug with bare flexible wires exposed is hazardous if engaged in a live power socket outlet.
WARNING: THIS APPLIANCE MUST BE EARTHED.
Green and Yellow - Earth, Blue - Neutral, Brown - Live.
NOTE:- Model PW2110 is a double insulated machine, and is fitted with a 2 core mains cable.

Blue – Neutral, Brown – Live.
As these colours may not correspond with the coloured markings identifying the terminals in your plug,
proceed as follows.:
The wire which is coloured green and yellow, must be connected to the terminal in the plug which is
marked with the letter ‘E’ or by the earth symbol or coloured green or green and yellow.
The wire which is coloured blue must be connected to the terminal which is marked with the letter 'N' or
coloured black or blue.
The wire which is coloured brown must be connected to the terminal which is marked with the letter 'L' or
coloured red or brown.
N.B. Three phase machines must be connected by a qualified electrician.

EXTENSION LEAD CHART:
Extension lead sizes shown assure a voltage drop of not more than 5% at rated load of tool.

3 6 10 13

Extension cable length Wire Size mm

2

7.5m 0.75 0.75 1.0 1.25
15m 0.75 0.75 1.0 1.5

22.5m 0.75 0.75 1.0 1.5
30m 0.75 0.75 1.25 1.5
45m 0.75 1.25 1.5 2.5

Ampere rating

(on Name plate)

- 4 -

SAFETY WARNING

WARNING

Please read the following instructions carefully, failure to do so could lead to serious personal injury.

IMPORTANT

Draper Tools Limited recommends that this machine should not be modified or used for any application
other than that for which it was designed. If you are unsure of its relative applications do not hesitate to
contact us in writing and we will advise you.

GENERAL SAFETY INSTRUCTIONS FOR MACHINE TOOLS

1. KNOW YOUR MACHINE TOOL

Read and understand the owner's manual and labels
affixed to the tool. Learn its application and limitations as
well as the specific potential hazards peculiar to this tool.

2. KEEP GUARDS IN PLACE

and in working order.

3. REMOVE ADJUSTING KEYS AND WRENCHES

Form a habit of checking to see that keys and adjusting
wrenches are removed from tool before turning it on.

4. KEEP WORK AREA CLEAN

Cluttered areas and benches invite accidents.
Floor must not be slippery due to oil or sawdust.

5. AVOID DANGEROUS ENVIRONMENT

Do not use power tools in damp or wet locations or
expose them to rain. Keep work area well lit.
Provide adequate surrounding work space.

6. KEEP CHILDREN AWAY

All visitors should be kept a safe distance from work
area.

7. MAKE WORKSHOP CHILDPROOF

- with padlocks, master switches, or by removing
starter keys.

8. DO NOT FORCE TOOL

It will do the job better and safer at the rate for which it
was designed.

9. USE RIGHT TOOL

Do not force tool or attachment to do a job for which it
was not designed.

10. WEAR PROPER CLOTHING

Do not wear loose clothing, gloves, neckties or jewellery
(rings, wristwatches) to catch in moving parts. NON SLIP
footwear is recommended. Wear protective hair
covering to contain long hair. Roll long sleeves above
the elbow.

11. USE SAFETY GOGGLES (Head Protection)

Wear safety goggles (must comply with BS 2092) at all
times. Normal spectacles only have impact resistant
lenses, they are NOT safety glasses. Also, use face or
dust mask if cutting operation is dusty and ear protectors
(plugs or muffs) during extended periods of operation.

12. DO NOT OVERREACH

Keep proper footing and balance at all times.

13. MAINTAIN TOOLS WITH CARE

Keep tools sharp and clean for best and safest
performance. Follow instructions for lubricating and
changing accessories.

14. DISCONNECT POWER TO THE TOOLS

Before servicing, when changing accessories such as
cutters etc.

15. AVOID ACCIDENTAL STARTING

Make sure switch is in 'OFF' position before plugging in
cable to the power supply.

16. USE RECOMMENDED ACCESSORIES

Consult the owner's manual for recommended
accessories. Follow the instructions that accompany the
accessories. The use of improper accessories may cause
hazards.

17. NEVER STAND ON TOOL

Serious injury could occur if the tool is tipped or if the
cutting tool is accidentally contacted. Do not store
materials above or near the tool such that it is necessary
to stand on the tool to reach them.

18. CHECK DAMAGED PARTS

Before further use of the tool, a guard or other part that is
damaged should be carefully checked to ensure that it
will operate properly and perform its intended function.
Check for alignment of moving parts, breakage of parts,
mounting and any other conditions that may affect its
operation. A guard or other part that is damaged should
be properly repaired or replaced.

19. DIRECTION OF FEED

Feed work into a blade or cutter against the direction of
rotation of the blade or cutter only.

20. NEVER LEAVE MACHINE RUNNING UNATTENDED

Turn power off. Do not leave machine until it comes to a
complete stop.

- 5 -

ADDITIONAL SAFETY RULES FOR PRESSURE WASHERS

1. The pressure washer must be continuously run with water. Dry running may cause serious damage to
the seals.

2. Do not store the pressure washer in cold places and protect the machine from freezing conditions.

3. Never leave the pressure washer switched ‘ON’ for more than 1 minute with the spray lance in the ‘OFF’
or closed position. If the unit is left for longer periods the temperature of the water in the pump unit will
rise and may damage the pump seals.

4. Do not use the pressure washer in an enclosed area where ventilation may be restricted, never cover the
pressure washer whilst in use.

5. For your own safety do not use the pressure washer during a thunderstorm and avoid directing the water
jet at the pressure washer or power supply.

6. Never direct the water jet towards persons or animals. The water jet is very powerful and could cause a
serious injury.

7. When moving the pressure washer use the handle provided. Do not pull the pressure washer using the
high pressure lance hose or mains supply cable.

8. When you have finished using the pressure washer switch the machine ‘OFF’ and disconnect from the
power supply. Now discharge any remaining pressure in the high pressure hose by pulling the lance
trigger.

- 6 -

KNOW YOUR PRESSURE WASHER

PW2000

PW2110

PW2130

PW2121

$

%

&

+

+

*

'

)

(

%

%

%

&

&

+

*

*

'

'

$

$

)

(

,

*

'

(

(

(

-

+

)

$

%

$ ON/OFF switch
% Transport handle/lance support
& High pressure outlet
' BS Approved non-rewireable moulded plug & cable
( Water inlet connector
) Hose pipe connector
* Lance
+ High presure hose connector
, Pressure regulator
- Pressure gauge

NOTE: The upright
position is for
transportation and
storage only.

- 7 -

ASSEMBLY

- 8 -

1. Secure the lance nozzle assembly $Fig.2.
into the handle assembly %by locating the
male connector &on the lance into the female
connector 'in the handle and turning as
shown in Fig.3.

3. Now from the loose parts supplied with the
pressure washer locate the hose pipe connector
) Fig.5. The hose pipe should be fitted to
connector ) using a suitable female hose
coupling clip (not supplied). See Fig.6.
IMPORTANT - DO NOT LOSE THE RUBBER
SEALING WASHER WHICH IS SUPPLIED WITH
THE CONNECTOR.

2. Now repeat the operation and secure the high
pressure output hose ( to the handle
assembly %Fig.4.

Fig.2.

Fig.3.

Fig.4.

Fig.5.

Fig.6.

%

$

'

&

%

(

)

ASSEMBLY Cont’d

- 9 -

7. Ensure the safety button *is in the off
position Fig.9.

8. Pull the trigger +on the lance handle
assembly to release any trapped air from the
pressure washer. See Fig.9.

9. Check that the ON/OFF switch is in the ‘O’
(OFF) position Fig.10.

10.Connect the pressure washer to the power

supply.

YOUR PRESSURE WASHER IS NOW READY FOR
USE.

5. Next connect the high pressure output hose
to the output connector as shown in Fig.8.

6. Turn the water supply ON.

Fig.8.

Fig.9.

Fig.10.

+

*

Fig.7.

4. Ensuring that the rubber sealing washer is
correctly seated inside the hose pipe
connector, connect the hose pipe to the water
inlet connector as shown in Fig.7.
NOTE MAXIMUM W

ATER TEMPERATURE 50ºC

(120ºF).

OPERATION

- 10 -

PW2000, PW2110 AND PW2121

HIGH PRESSURE CLEANING

The output water pressure is preset and cannot be
adjusted, the maximum pressure produced is 100
bar (for PW2000), 110 bar (for PW2110). Draper
Tools recommends that before carrying out any
cleaning operations always test a small
inconspicuous part of the area to be cleaned to
check that it is suitable.

The spray lance nozzle is adjustable and can
produce either a powerful fine pencil jet of water
or a less powerful fan jet of water See Figs.11 &

12.

1. To operate the machine switch the machine on
See Fig.13.

2. Aim the lance spray nozzle in the required
direction See Fig.14.

3. Pull the trigger on the handle. The water will
now spray from the lance. Adjust to the type of
spray pattern required as described above. To
stop spraying release the trigger.

FITTING AND USING THE DETERGENT
SPRAYING ATTACHMENTS

1. Detach the lance nozzle assembly $ Fig.2 from
the handle assembly %.

2. From the loose parts supplied with the pressure
washer locate the detergent spraying
attachment - Fig.15.

Fig.14.

Fig.11.

Fig.12.

Fig.13.

Fig.15.

-

OPERATION Cont’d

- 11 -

4. Fill the detergent bottle with detergent to the
required level See Fig.17. Follow manufacturer’s
directions for concentration to be used.

5. Refit the bottle to the spray nozzle assembly as
shown in Fig.18.

6. Switch the machine ‘ON’ See Fig.19.

7. Aim the detergent spraying attachment in the
required direction and pull the trigger.
Detergent will now spray from the attachment
See Fig.20 to stop the spraying release the
trigger.

Fig.17.

Fig.18.

Fig.19.

Fig.20.

PW2000, PW2110 AND PW2121 Cont’d

3. Fit the detergent spraying attachment to the
handle assembly in the same way as when
fitting the lance assembly See Fig.16.

Fig.16.

OPERATION Cont’d

- 12 -

PW2130

PRESSURE CLEANING

The output water pressure is adjustable, and is
controlled by knob 0Fig.21. Turn the knob
clockwise to increase the pressure, anti-clockwise
to decrease.

The output pressure is indicated on the gauge 1
Fig.22. Draper Tools recommends that before
carrying out any cleaning operations always test a
small inconspicuous part of the area to be cleaned
to check that it is suitable.

The spray lance nozzle is adjustable and can
either produce a powerful pencil jet of water or a
less powerful fan jet of water See Fig.23 & 24.
This is done by rotating the head.

1. To operate the machine switch the machine on
See Fig.25.

IMPORTANT NOTE: When working the machine
should be in the horizontal position, the upright
position is for transportation and storage only.

Fig.21.

Fig.24.

Fig.22.

Fig.23.

Fig.25.

0

1

OPERATION Cont’d

- 13 -

DETERGENT SPRAYING

1. Remove the filler cap from the reservoir tank.
See Fig.27.

2. Fill the reservoir with correctly diluted
detergent to the required level See Fig.28 and
refit the filler cap.

3. Switch the machine ‘ON’ See Fig.29.

4. To enable the detergent to flow from the
reservoir tank, pull the nozzle 3 forward
Fig.30.

5. Aim the lance in the required direction and pull
the trigger. Detergent will be syphoned from
the reservoir tank, mixed with water and
sprayed from the lance. To stop spraying
release the trigger to return to standard
pressure washing mode, return the nozzle to the
original position.

Fig.27.

Fig.30.

Fig.29.

3

PW2130 Cont’d

2. Aim the lance spray nozzle in the required
direction See Fig.26.

3. Pull the trigger on the handle. The water will
now spray from the lance. Adjust to the required
spray pattern as shown in Fig. 23 and 24.
To stop spraying release the trigger.

Fig.26.

Fig.28.

MAINTENANCE

- 14 -

WARNING - FOR YOUR OWN SAFETY, TURN
SWITCH OFF AND REMOVE THE PLUG FROM
THE POWER SUPPLY OUTLET BEFORE
MAINTAINING YOUR PRESSURE WASHER.

Lubrication - Your pressure washer is supplied

as a sealed unit and does not require further
lubrication.

(Oil type - 15W40 NON-SYNTHETIC).

Water Filter - Periodically check and clean the
water inlet filter 2 Fig.31 to avoid it becoming
blocked.

Long Storage - Before a long period of storage,
always ensure the machine and hose are
completely empty of all fluids. Also clean the
water filter 2 Fig. 31. Failure to do so may
invalidate warranty.

If the pressure washer has been stored over a
long period of time, there is a possibility of
calcium build up. This may make instant starting
difficult.

To help rectify this problem turn the electric
pump unit using a screwdriver as shown in Fig.32
this will prevent the pump unit from drawing
excess power.

The pump may also leak when started, this will be
due to hardened seals. Once the pump warms up
the seals will soften and rectify this.

Motor - The electric motor is fitted with a thermal
overload safety switch. The motor will stop if it
overheats. Wait 5-10 minutes before starting the
pump again and identify the cause of the
problem.

Important Note: The upright position is for
transportation and storage only.

Fig.31.

Fig.32.

2

TROUBLESHOOTING

- 15 -

Trouble Probable Cause Remedy

No power Pump is stuck Turn the motor manually (see page 15).

Thermal overload has tripped Switch OFF and let the machine cool
Faulty power cable This should be replaced immediately by a

qualified person

Power supply fuse blown Replace fuse

Pump is not producing Water inlet filter blocked air leaks Clean the filter
full power at connections or hoses Check that all the connections are locking and

are tight.

Check the water inlet hose pipe is not leaking.
Suction/delivery valves are Clear or replace valves.
clogged or worn out
Unloader valve is stuck. Loosen and retighten regulation server.
Lance nozzle incorrect or worn out. Check and/or replace.

Fluctuating pressure Pump sucking in air Check that all hoses and connections are

airtight
Valves dirty, worn out or stuck Clean or replace.
Sealing worn out. Check and replace.

Water leaking from pump Sealing worn out. Check and replace.

The motor stops suddenly Thermal safety overload switch has Switch the unit off and let it cool for 5-10 mins.

tripped due to overheating.

W

ARNING:

FOR YOUR OWN SAFETY TURN SWITCH OFF AND REMOVE PLUG

FROM POWER SUPPLY.

IMPORTANT:

PLEASE NOTE ALL REPAIRS/ADJUSTMENTS SHOULD BE CARRIED

OUT BY A QUALIFIED PERSON.

POWER DIVISION HELPLINE:

[phone]

OPTIONAL ACCESSORIES

The following accessories are available from your local Draper Power Tool Stockist.

- 16 -

Accessories for Models PW2000, PW2110, PW2121 and PW2130
Pressure Washers

Unit of Sale: 1 (exceptions shown below table).

Stock Part

No. No.

34448

38279

54622

34449

34450

34451

34452

34454

APW2

YPW6002 Replacement Lance

0071

YPW6002 Replacement Lance

0171 PW2130

APW3

APW4 Rotary Brush

APW5

APW6

APW7

Description

Turbo Lance for
PW2110

Increases cleaning
power of the water
jet up to 2000p.s.i.

for PW2110 & PW2121

Washing Brush
Fixed (Car)

Pipe/Drain Cleaner

Ideal for cleaning and
clearing blocked
drains, both indoors
and outdoors.

Sandblasting
Attachment Kit

Combination of
powerful water jet &
grit (not supplied)
provides more
effective method of
cleaning.

Detergent Spray
Attachment

34455

34456

34457

56252

57562

57560

34649

34648

34706

34664

*Unit of Sale: 12 bottles. †Unit of Sale: 4 bottles.

APW8

APW9

APW10

YPW4018 Replacement Hose

0019 Assembly

YPW4.018. Replacement Hose

0028 with Brass Nipple Fit

YPW6.001. Replacement Trigger

0029 with Brass Nipple Fit

PWW1*

PTFR1*

PWW5†

PTFR5†

Lance Extension
180mm

Extended Lance
1500mm

High Pressure
Extension Hose 6M

Vehicle Wash and
Wax Shampoo 1L

High Foam Traffic
Film Remover 1L

Vehicle Wash and
Wax Shampoo 5L

High Foam Traffic
Film Remover 5L

PW2111

PRESSURE WASHER

ACCESSORIES

SUITABLE FOR USE WITH DRAPER MODELS

AND OTHER MANUFACTURER’S SIMILAR MACHINES.

09/2001

PW2210

PW2220

PW3000

PW2121

TROLLEY/WHEEL KIT

■ STOCK No. 61225 ■ PART No. APW30

FOR USE WITH DRAPER PRESSURE WASHER
STOCK No.61098 PART No.PW2111

- 1 -

The trolley/wheel kit complete with
transport handle makes the machine
more manoeuvrable than before,
whilst still offering stability during
use.

FITTING INSTRUCTIONS

Refer to manufacturer’s instruction
manual.

PW2111

TURBO LANCE

■ STOCK No. 57354 ■ PART No. APW17

FOR USE WITH DRAPER PRESSURE WASHER
STOCK No.56456 PART No.PW2220

■ STOCK No. 57361 ■ PART No. APW24

FOR USE WITH DRAPER PRESSURE WASHER
STOCK No.56457 PART No.PW3000

■ STOCK No. 65822 ■ PART No. APW34

FOR USE WITH DRAPER PRESSURE WASHER
STOCK No.65376 PART No.PW2210

- 2 -

The turbo lance nozzle for PW2220, PW3000 and PW2210 models,
increases the cleaning power of the water jet, therefore saving time,
water, operator effort and giving an improved cleaning result.

FITTING INSTRUCTIONS

Remove existing lance and fit the turbo lance to the trigger assembly,
refer to manufacturer’s instruction manual.

PW2210PW2220 PW3000

WASHING BRUSH
(FIXED HEAD)

■ STOCK No. 34449 ■ PART No. APW3

FOR USE WITH DRAPER PRESSURE WASHERS
STOCK No.61098 PART No.PW2111

STOCK No.54435 PART No.PW2121

■ STOCK No. 57355 ■ PART No. APW18

FOR USE WITH DRAPER PRESSURE WASHER
STOCK No.56456 PART No.PW2220

■ STOCK No. 57362 ■ PART No. APW25

FOR USE WITH DRAPER PRESSURE WASHER
STOCK No.56457 PART No.PW3000

■ STOCK No. 65824 ■ PART No. APW36

FOR USE WITH DRAPER PRESSURE WASHER
STOCK No.65376 PART No.PW2210

- 3 -

This washing brush produces a fast and efficient method of cleaning
cars, caravans, boats and motorcycles, etc.

FITTING INSTRUCTIONS

Remove existing lance and fit the washing brush to the handle
assembly, refer to manufacturer’s instruction manual.

PW2111

PW2121

PW2210PW2220 PW3000

- 4 -

The rotary washing brush produces a fast and efficient method of
cleaning cars, caravans, boats and motorcycles, etc.

FITTING INSTRUCTIONS

Remove existing lance and fit the rotary brush to the handle assembly,
refer to manufacturer’s instruction manual.

ROTARY WASHING
BRUSH

■ STOCK No. 34450 ■ PART No. APW4

FOR USE WITH DRAPER PRESSURE WASHERS
STOCK No.61098 PART No.PW2111

STOCK No.54435 PART No.PW2121

■ STOCK No. 57356 ■ PART No. APW19

FOR USE WITH DRAPER PRESSURE WASHER
STOCK No.56456 PART No.PW2220

■ STOCK No. 57363 ■ PART No. APW26

FOR USE WITH DRAPER PRESSURE WASHER
STOCK No.56457 PART No.PW3000

■ STOCK No. 65823 ■ PART No. APW35

FOR USE WITH DRAPER PRESSURE WASHER
STOCK No.65376 PART No.PW2210

PW2111

PW2121

PW2210PW2220 PW3000

EXTENDED LANCE ­1500mm

■ STOCK No. 34456 ■ PART No. APW9

FOR USE WITH DRAPER PRESSURE WASHERS
STOCK No.61098 PART No.PW2111

STOCK No.54435 PART No.PW2121

- 5 -

This extended lance increases the reach of the water jet. Ideal for use on
caravans, high sided vehicles and conservatories, etc.

FITTING INSTRUCTIONS

Remove existing lance and fit the extended lance to the handle
assembly, refer to manufacturer’s instruction manual.

PW2111

PW2121

HIGH PRESSURE HOSE

■ STOCK No. 65820 ■ PART No. APW32

FOR USE WITH DRAPER PRESSURE WASHER
STOCK No.65376 PART No.PW2210

- 6 -

FITTING INSTRUCTIONS

Refer to manufacturer’s
instruction manual.

PW2210

LANCE EXTENSION
PIECE - 180mm

■ STOCK No. 34455 ■ PART No. APW8

FOR USE WITH DRAPER PRESSURE WASHERS
STOCK No.61098 PART No.PW2111

STOCK No.54435 PART No.PW2121

- 7 -

The reach of the standard lance can be increased by 180mm, with every
extension piece added.

FITTING INSTRUCTIONS

Remove existing lance and fit the extension piece to handle assembly,
refer to manufacturer’s instruction manual.

PW2111

PW2121

- 8 -

The pipe/drain cleaning kit has a 4 metre hose with a
detachable nozzle.

FITTING INSTRUCTIONS

Remove existing lance, handle and hose assembly and
fit the hose to the water outlet, refer to manufacturer’s
instruction manual.

OPERATION

Before switching the machine on, place the
nozzle (Fig.1.) into the pipe/drain, (Do not
push the hose). Now switch the pressure
washer on. The nozzle, with a little help,
will propel itself through the pipe or
drain.

Fig.1.

TO POWER
WASHER

PIPE/DRAIN CLEANER

■ STOCK No. 34451 ■ PART No. APW5

FOR USE WITH DRAPER PRESSURE WASHERS
STOCK No.61098 PART No.PW2111

STOCK No.54435 PART No.PW2121

■ STOCK No. 57357 ■ PART No. APW20

FOR USE WITH DRAPER PRESSURE WASHER
STOCK No.56456 PART No.PW2220

■ STOCK No. 57364 ■ PART No. APW27

FOR USE WITH DRAPER PRESSURE WASHER
STOCK No.56457 PART No.PW3000

■ STOCK No. 65825 ■ PART No. APW37

FOR USE WITH DRAPER PRESSURE WASHER
STOCK No.65376 PART No.PW2210

PW2111

PW2121

PW2210PW2220 PW3000

- 9 -

The sandblasting attachment can be used for removing
paint and rust etc.

FITTING INSTRUCTIONS

place the suction probe (A) (Fig.2.) in the abrasive.
Remove existing lance and fit the sandblasting
attachment to the handle assembly, refer to
manufacturer’s instruction manual.

CLEANING INSTRUCTIONS

Remove suction probe (A) (Fig.2.) from the
abrasive. To remove remaining abrasive, hold
water hose to nozzle (B)
(Fig.2.).This will flush the
water through the system until
clean. Dry completely before using again.

Fig.2.

A

B

SANDBLASTING
ATTACHMENT

■ STOCK No. 34452 ■ PART No. APW6

FOR USE WITH DRAPER PRESSURE WASHERS
STOCK No.61098 PART No.PW2111

STOCK No.54435 PART No.PW2121

■ STOCK No. 57358 ■ PART No. APW21

FOR USE WITH DRAPER PRESSURE WASHER
STOCK No.56456 PART No.PW2220

■ STOCK No. 57365 ■ PART No. APW28

FOR USE WITH DRAPER PRESSURE WASHER
STOCK No.56457 PART No.PW3000

■ STOCK No. 65977 ■ PART No. APW38

FOR USE WITH DRAPER PRESSURE WASHER
STOCK No.65376 PART No.PW2210

PW2111

PW2121

PW2210PW2220 PW3000

DETERGENT SPRAY
ATTACHMENT

■ STOCK No. 34454 ■ PART No. APW7

FOR USE WITH DRAPER PRESSURE WASHERS
STOCK No.61098 PART No.PW2111

STOCK No.54435 PART No.PW2121

- 10 -

This 0.5 litre detergent spray attachment,
provides the facility for in-line
application of cleaning agents, such as
shampoo, wash and wax, traffic film
remover, etc.

FITTING INSTRUCTIONS

Remove existing lance and fit detergent
spray attachment to handle assembly,
refer to manufacturer’s instruction
manual.

PW2111

PW2121

- 11 -

FITTING INSTRUCTIONS

Remove damaged lance and fit the replacement lance to the handle
assembly, refer to manufacturer’s instruction manual.

REPLACEMENT
LANCE

■ STOCK No. 54254

FOR USE WITH DRAPER PRESSURE WASHER
STOCK No.61098 PART No.PW2111

■ STOCK No. 62128

FOR USE WITH DRAPER PRESSURE WASHER
STOCK No.54435 PART No.PW2121

■ STOCK No. 65821 ■ PART No. AW P33

FOR USE WITH DRAPER PRESSURE WASHER
STOCK No.65376 PART No.PW2210

PW2210PW2111 PW2121

HOSE REEL
(WITHOUT HOSE)

■ STOCK No. 56458 ■ PART No. APW15

FOR USE WITH DRAPER PRESSURE WASHERS
STOCK No.56456 PART No.PW2220

STOCK No.56457 PART No.PW3000

- 12 -

The hose reel provides
easy and safe storage on
board the machine for the
high pressure hose.

FITTING
INSTRUCTIONS

Refer to manufacturer’s
instruction manual.

PW2220

PW3000

BODYWORK LANCE

■ STOCK No. 57353 ■ PART No. APW16

FOR USE WITH DRAPER PRESSURE WASHER
STOCK No.56456 PART No.PW2220

■ STOCK No. 57360 ■ PART No. APW23

FOR USE WITH DRAPER PRESSURE WASHER
STOCK No.56457 PART No.PW3000

- 13 -

This bodywork lance is an efficient method of cleaning cars, caravans,
boats and motorcycles, etc.

FITTING INSTRUCTIONS

Remove existing lance and fit the extended lance to the handle
assembly, refer to manufacturer’s instruction manual.

PW2220

PW3000

TWIN LANCE

■ STOCK No. 57359 ■ PART No. APW22

FOR USE WITH DRAPER PRESSURE WASHER
STOCK No.56457 PART No.PW3000

- 14 -

This twin lance is an industrial high and low pressure attachment.

FITTING INSTRUCTIONS

Remove existing lance and fit the extended lance to the handle
assembly, refer to manufacturer’s instruction manual.

PW3000

TRIGGER ASSEMBLY

■ STOCK No. 65819 ■ PART No. APW31

FOR USE WITH DRAPER PRESSURE WASHER
STOCK No.65376 PART No.PW2100

- 15 -

FITTING INSTRUCTIONS

Remove existing handle assembly and fit the replacement trigger
assembly, refer to manufacturer’s instructions.

PW2210

PRESSURE WASHER
CONSUMABLES

- 16 -

STOCK No. PART No. DESCRIPTION

34649 PWW1 Vehicle Wash and Wax shampoo

1 Litre

34648 PTFR1 High Foam Traffic Film Remover

1 Litre

34706 PWW5 Vehicle Wash and Wax Shampoo

5 Litre

34664 PTFR5 High Foam Traffic Film Remover

5 Litre

DRAPER TOOLS LIMITED,

Hursley Road, Chandler's Ford, Eastleigh, Hants. SO53 1YF. U.K.

Helpline: [phone].

Sales Desk: [phone].

General Enquiries: [phone].

Fax:[phone].

www.draper.co.uk
e-mail: [e-mail]

©Published by Draper Tools Ltd.

No part of this publication may be reproduced,

stored in a retrieval system or transmitted in

any form or by any means, electronic, mechanical

photocopying, recording or otherwise without prior

permission in writing from Draper Tools Ltd.

YOUR DRAPER STOCKIST