TECHNICAL DATA SHEET
OptiFlex
TENSIONED SCREEN SURFACES
Matt White XT1000V
Extra Wide Viewing Cone / Typical Contrast / On-Axis Gain of 1.0
The perfect matt white diusing surface. Recommended for use with all types of projectors provided ambient light can
be reasonably controlled. Reects a uniformly bright image over complete 180° viewing cone with precise resolution
and accurate color balance. This surface was previously named “M1300.”This surface is GREENGUARD Children and
SchoolsSM certied.
OptiFlex Family of Surfaces
OptiFlex surfaces are suitable for tensioning and are available on permanently tensioned screens, tab tensioned rolleroperated screens, or both. Choose OptiFlex for the attest front projection viewing surfaces.
Surface Characteristics
• Maximum Height Without Seams: 144”
• Weight (g/sm): 396
• Thickness (mm): 0.24
• Cleaning: Mild soap and water
• Composition: Flexible PVC
Draper, Inc. 411 S. Pearl St. Spiceland, IN 765-987-7999 www.draperinc.com Form: 11-412_3-12
Reective Performance*
• Gain Chart—See below
0º Gain: 1.0
Half Gain Angle: No half-gain angle
*Individual test results may vary. Results based on a representative
sample in Draper inventory.
0º GAIN: 1.0, VIEWING CONE: 180
SCREEN SURFACE
º
PROJECTION
3.50
3.25
3.00
2.75
2.50
2.25
2.00
1.75
GAIN
1.50
1.25
1.00
0.75
0.50
0.25
0.00
60º55º50º45º40º35º30º25º20º15º10º5º0º5º10º15º20º25º30º35º40º45º50º55º60
SOURCE
VIEWING ANGLE
GAIN CHART — MATT WHITE XT1000V
º
Loading...