Draper 33079, CT/WS Instruction Booklet

CRIMPING & WIRE
STRIPPING KIT

■ STOCK No.33079. ■ PART No.CT/WS.

01/98

• INSTRUCTIONS •

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO

ENSURE THE SAFE AND EFFECTIVE USE OF THIS KIT.

1 IMPORTANT:

Oil here before use.

2 To cut cable,place cable

between cutter blades ❄✪❆
and fully close handles.

3

To strip cable,clamp cable
between front blades ❄✫❆.Use
the metric or imperial
graduations marked on the
lower jaws ❄✬❆ to control the
length to be stripped.

4

Gently squeeze the handles
together and the cable is held
by external jaws, as the
insulation is lightly cut without
damaging the conductors. For
cables with a hard,or soft
sheath, change the blade
pressure by turning the
adjusting knob ❄✭❆.

5

To cut larger diameter cable,
turn the adjusting knob ❄✭❆
clockwise. To cut smaller
diameter cable, turn
anticlockwise.

6 As the handles are closed,

the sliding action of the
blades removes the
insulation up to 14mm in
length.

DRAPER TOOLS LIMITED, HURSLEY ROAD, CHANDLER'S FORD, EASTLEIGH, HAMPSHIRE. SO53 1YF. U.K.

TEL: [phone]. FAX: [phone]

WIRE CUTTER

FOR CRIMPING INSULATED
TERMINALS 1.5, 2.5,6mm

2

FOR SHEARING METRIC (ISO)
BOLTS. THREADED M2.6, M3.0,
M3.5, M4.0, M5.0

FOR CRIMPING SQUARE
NON-INSULATED TERMINALS

1.5 AND 2.5mm

2

FOR CRIMPING ROUND
NON-INSULATED TERMINALS

1.5, 2.4 AND 4-6mm

2

FOR CRIMPING
IGNITION TERMINALS

6

1.5

2.5

M

2.6
M3

NON INSULATED

SQUARE TERMINALS

2.5

M5

1.5

NON INSULATED

ROUND TERMINALS

WIRE

CUTTER

INSUL

TERMINALS

ISO

M4

IGNITION

M

3.5

TERMINALS

4-6

2.5

1.5