Page 1
ELECTRIC
ACCESS FIT V
TAB-TENSIONED, CEILING-RECESSED, SLIM CASE DESIGN
The slim case design of the Access FIT V ceiling-recessed, tab-
tensioned, electric projection screen provides easy installation above
the ceiling—perfect for small conference or multi-purpose rooms
and home theaters. Installation of the case during the initial phase
of construction eliminates job site damage, allowing for installation
of the screen at a later time.
FEATURES
– Image area fully framed with black.
Standard 12" black drop at top of
viewing area.
– Adjustable or removable hoisting
brackets included for easy lifting during
installation.
– Sliding brackets on top of the case
allow for adjustments for mounting.
– Sliding brackets inside case
accommodate different size screens.
– Bottom closure panel detachable or
hangs in place with “T” bracket to
provide accessibility for service or
maintenance.
– Quick-connect wiring allows for early
installation of the case with the addition
of the screen later.
– Includes a 110V, 3-position switch
(standard).
– WARRANTY: One year against defects
in materials and workmanship.
OPTIONS
– Quiet, low voltage motors and 220V
options available.
– Control options: Low voltage, video
interface or other controls can be built
into housing for below ceiling access.
– Viewing Surfaces: TecVision®, OptiFlexTM
(tensioned), CineFlexTM (rear projection)
families.
– White case standard, black available
upon request.
SUPPORTING DOCUMENTS
All instructions, technical drawings and
other supporting documents are located
at: draperinc.com/Documents.aspx
Tab-tensioned screens provide a
perfectly flat viewing surface with
better image quality. RF welded
tabs eliminate stickiness and tab
separation. Tabs warranted against
separation for five years.
SIZES
– Case dimensions 6 7/16" wide x 5 11/16"
high (16 cm x 14 cm) including trim
flange.
– Maximum image width up to 104"
(264 cm) wide, depending on surface
selection.
– 16:10 FORMAT: from 94" (238 cm)
to 123" (312 cm) diagonal.
– 16:9 HDTV FORMAT: from 92" (233 cm)
to 119" (302 cm) diagonal.
– 4:3 NTSC/PAL Format: from 72"
(183 cm) to 132" (335 cm) diagonal.
– AV FORMAT: from 50" x 50" (127 cm
x 127) to 72" x 96" (183 cm x 244 cm)
viewing area.
– Custom sizes available: For larger sizes
see the Access V.
For more information on this product visit:
projectionscreens/electricscreens.aspx
Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385
draperinc.com | 765.987.7999 | 800.238.7999
© 2018 All Rights Reserved | Form: Elec_AccessFitV_18
Loading...