Page 1
®
Assemble ceiling slot trim kit
and attach to screen case
before suspending screen case.
using this product with with Luma 2.
*Please see page 2 for instructions for
Please Note: Ceiling Trim Kit
NOT FOR USE on large case
Targa and Premier screens.
Parts List
Slot fascia may need to be cut to proper
width. Measure total case width (from
outer edges of endcaps) and cut slot
fascia to match that width. Make sure
cuts are square.
A—Slot Fascia (2)
B—Left Fascia Bracket (1)
C—Right Fascia Bracket (1)
D—Rigid Perforated Strap (4)
Please Note
For the largest size
trim kit (174") two Anti-
Deflection Brackets
are also provided. For
installation details, see
page 3.
Targa / Premier
" hole for electrical connection.
8
/
“V” notched end piece fits beneath
7
E—10-32 Nylon Insert Lock Nut (10)
F—Screw #10-32 x .5"L Hex Wash Hd Zinc Type "F" (16)
G—Screw #6-32 x 3/4" Long Phil Pan Hd Type "AB" (8)
H—Case Attachment Bracket (2)
Please Note
If you encounter any difficulties installing your ceiling slot trim kit, call your
dealer or Draper, Inc., Spiceland, Ind., (765) 987-7999; fax (765) 987-7142.
Installation Instructions
Caution
Ceiling Trim Kit for Recessing Targa, Premier and Luma 2* Projection Screens by Draper
Read instructions through completely before proceeding.
Follow instructions carefully. Installation contrary to instructions invalidates warranty.3 Should be installed level (using a carpenter’s level).4 Before assembling ceiling slot trim kit, slot fascia must be cut to size (see drawings).5 Mount ceiling slot trim kit to screen case before suspending case.6 Hardware for assembling ceiling slot trim kit and attaching to screen case is provided;
1
2
Please refer to the correct drawing for your product. If using a Premier or Targa, see
it is the responsibility of the installer to provide the appropriate hardware for suspend-
ing or otherwise mounting the screen case.
7
the drawing on page 1. If using a Luma 2, refer to the drawing on page 2.
Please Note: Case Attachment
Brackets (H) have two attachment
holes. If not using Rigid Perforated
Straps (D) to suspend screen,
refer to specific screen instructions
for details on which hole can be
used for attaching ceiling slot kit to
The Ceiling Opening Trim Kit is for use in
an acoustical, drop ceiling only. Not rec-
ommended for drywall or hard ceilings.
These items included with your
kit are not equired for Targa or
Premier. They are for use only
with Luma 2 screens.
screen case.
Excess metal hanger material
can be cut off or folded over.
Hangers can also be used to
suspend screen.
Copyright © 2013 Draper Inc. Form CeilingTrimKit_Inst13-R2 Printed in U.S.A.
Page 2
B
www
9
J
Ceiling Trim Kit Instructions by Draper—Luma2
Excess metal hanger material
can be cut off or folded over.
Hangers can also be used to
suspend screen.
I
F
The Ceiling Opening Trim Kit is for use in
an acoustical, drop ceiling only. Not rec-
ommended for drywall or hard ceilings.
G
For the largest size trim kit
(174") two Anti-Deflection
Brackets are also provided. For
installation details, see page 3.
.draperinc.com
(765) 987-799
I—Screw #10-32 x 1" L Phil Pan Head [LUMA2 ONLY]
J—Grey Rubber Grommet Foot (Spacer)[LUMA2 ONLY]
F—Screw #10-32 x .5"L Hex Wash Hd Zinc Type "F" (16)
G—Screw #6-32 x 3/4" Long Phil Pan Hd Type "AB" (8)
H—Case Attachment Bracket (2)
C—Right Fascia Bracket (1)
D—Rigid Perforated Strap (4)
E—10-32 Nylon Insert Lock Nut (10)
A—Slot Fascia (2)
B—Left Fascia Bracket (1)
Luma 2
A
Slot fascia may need to be cut to proper
width. For Luma 2 cases ONLY, cut slot
fascia 1" longer than the total case width
(from outer edges of endcaps). Make sure
cuts are square.
C
E
Please Note
H
Assemble ceiling slot trim kit
and attach to screen case
before suspending screen case.
D
Please Note: Case Attachment
Brackets (H) have two attachment
holes. If not using Rigid Perforated
Straps (D) to suspend screen,
refer to specific screen instructions
for details on which hole can be
used for attaching ceiling slot kit to
screen case.
Parts List
Page 2 of 3
Page 3
www
9
Page 3 of 3
(765) 987-799
Please Note
For the largest size trim kit (174") two
Anti-Deflection Brackets are provided
to prevent sagging or deflection in the
center of the trim kit. Use provided
sheet metal screws to attach bracket
as shown in the drawings above. You
can then either use wire to tie off the
bracket, or you can attach the ceiling
grid to the bracket.
.draperinc.com
Ceiling Trim Kit Instructions by Draper
#6-¼" Sheet Metal Screws,
Anti-deflection Bracket
Loading...