Dranetz Technologies MM-HDPQ User manual

/ /

Magnetic Mounting Option

MM-HDPQ (118329-G1)

User Instructions





Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

Published by Dranetz
1000 New Durham Road
Edison, NJ 08818-4019 USA
Telephone: [phone] or 732-287-3680
Fax: [phone]
Web site: www.dranetz.com
Copyright ©2016 Dranetz
All rights reserved.

No part of this book may be reproduced, stored in a
retrieval system, or transcribed in any form or by any
means—electronic, mechanical, photocopying, recording,
or otherwise—without prior written permission from the
publisher, Dranetz, Edison, NJ 08818-4019.

Printed in the United States of America.

P/N 899252 Rev A 03.22.16

1

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

INTRODUCTION

The Magnetic Mounting Optional accessory MM-HDPQ allows the
Dranetz HDPQ Xplorer, Xplorer 400, Guide, or Visa to be attached to
ferromagnetic metallic surfaces.

This instruction guide contains procedures on how to mount the
MM-HDPQ accessory to the instrument and its use.

Read all Warning and Safety Precautions before attempting to connect
and operate the instrument.

CAUTION STATEMENTS

 Neodymium magnets are used in this mounting option.

Individuals with pacemakers or internal medical devices
should not handle strong rare-earth magnets. Studies have
shown that magnetic fields can affect the operation of these
devices. These magnets should be kept at a safe distance
from individuals with these devices.

 This magnetic mount is for use with the equipment described in

these instructions only and can only support this equipment in a
safe manner.
DO NOT use this option to support any additional equipment.

 When removing the instrument with the attached magnetic

mount from a metal surface lift up from the bottom of the
instrument and pull toward you to avoid any scratches to the
surface.

 Magnetic fields may cause damage to magnetic storage

media. Keep all magnets away from any type of magnetic
storage media.

2

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

INSTRUCTIONS:

1. Remove the hanger bracket from the instrument by removing two
#6-32 x 5/16” long Phillip screws and two flat washers from the
hanger bracket.

Note: The screws used with the hanger bracket are not used with
the magnetic mount, so please store them with the hanger
bracket if used in the future.

2. Replace the hanger bracket with shoulder plate
(P/N 118312-G1) that is a standard HDPQ accessory and is part
of the Keyhole Mounting Kit. The screws supplied with the
Keyhole Mounting Kit are not used when installing the Magnet
Housing, set them aside and store them if used in the future.

3

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

3. Secure the Magnet Housing Assembly (P/N 118329-G1) to the
unit using the two “A” Phillip screws (P/N 902248-LF, #6-32, 7/8
in.) that are attached to the magnet housing.

MAGNET HOUSING ASSEMBLY
118329-G1

SECURE MAGNET HOUSING TO UNIT
USING THE THE TWO “A” SCREWS THAT
ARE ATTACHED TO THE MAGNET HOUSING

A

A

ASSEMBLED VIEW

4. Follow all Warning and Safety Precautions before attempting to
connect and operate the Xplorer, Xplore 400, Guide, or Visa.
Refer to the User's Guide for circuit connection and operation
instructions.

4

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

Statement of Warranty

All Dranetz manufactured portable instruments and accessories are
warranted to the original purchaser against defective material and
workmanship for a period of three years from the date of invoice. User
replaceable instrument batteries are warranted for a period of one year
from the date of invoice. Certain Dranetz branded accessories, such as
current transformers and other accessories not manufactured by
Dranetz, are warranted to the original purchaser against defective
material and workmanship for a period of one year from the date of
invoice. Warranties for products and accessories sold by, but not
branded as Dranetz, are covered by their respective manufacturer’s
warranties and are not warranted by Dranetz. Dranetz will repair or
replace, at its option, all defective equipment that is returned, freight
prepaid, during the warranty period. There will be no charge for repair,
provided there is no evidence that the equipment has been mishandled
or abused. This warranty shall not apply to any defects resulting from
improper or inadequate maintenance, buyer-supplied hardware/software
interfacing, unauthorized modification or misuse of the equipment,
operation outside of environmental specifications, or improper site
preparation or maintenance.

5

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

Statement of reliability

The information in this manual has been reviewed and is believed to be
entirely reliable, however, no responsibility is assumed for any
inaccuracies. All material is for informational purposes only and is
subject to change without prior notice.

Notice regarding proprietary rights

This publication contains information proprietary to Dranetz. By
accepting and using this manual, you agree that the information
contained herein will be used solely for the purpose of operating
equipment of Dranetz.

Copyright

This publication is protected under the Copyright laws of the United
States, Title 17 et seq. No part of this publication may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into
any language or computer language, in any form, by any means,
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise, without the prior written consent of Dranetz, 1000 New
Durham Road, Edison, New Jersey 08818.

Copyright © 2016 Dranetz
All Rights Reserved. Printed in the United States of America.

Trademarks

Dranetz HDPQ® is a registered trademark of Dranetz.

6

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

7

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com