Drake Datacom TDT-120 Instruction Manual

English

Contents

GENERAL INFORMATION

Main Features For your Safety Unpacking General Operation RCU Front Panel Rear Panel

INSTALLATION

WELCOME PAGE

MAIN MENU

1. TV

2. RADIO

3. MULTIMEDIA

4. GAME

5. SETUP

6. HOT KEY

TROUBLE SHOOTING

P1 P2 P3 P3 P4 P5 P5

P8 P11 P12 P14 P15 P18

P20

GENERAL INFORMATION

This Digital Terrestrial Receiver (DTR) will take you to the new and exciting world of Digital Television. A world of crystal clear widescreen pictures, digital sound, more information and new services. All this and more on "Free to Air" Digital Television.

To make full use of your new DTR please take the time to familiarize yourself with the extensive features of the unit detailed in this User's Guide.

If you need help in setting up please call your dealer or a customer service adviser.

Main Features

MPEG-2 digital & fully DVB-T compliant

Automatic PAL/NTSC conversion

1000 channels TV and Radio programmable

Fully support to 7 days Electronic Program Guide(EPG)

256 colors On Screen Display

Channel search in automatic and manual search

Various channel editing functions(favorite, move, lock, skip ,delete, search, rename

and sort)

Parental control for channels

Easy to use Menu System

Software upgrades through USB device

Subtitle support DVB EN300743 and EBU

Teletext support DVB ETS300472 by VBI and OSD

Automatic save for last channel

Support Logic Channel Number(LCN)

One game

GENERAL INFORMATION

For Your Safety

To avoid electric-shock hazards, do not open the cabinet, refer servicing to qualified personnel only.

Do not expose the receiver un-der the sunlight. And keep it away from the heat source.

When the abnormal phenomenon occur, you should cut off the power immediately.

Keep the receiver away from flower vases, tubs, sinks, etc., in order to avoid damaging the equipment.

Do not block ventilation holes of the Receiver so that air can circulate freely.

Do not touch the receiver during thunder, since that might create electric-shock hazards.

Switch the receiver off whenever it remains out of service for an extended period.

Be sure to turn the Receiver off and disconnect the AC power cord before cleaning the Receiver surface. If the surface is dirty, wipe clean with a cloth which has been dipped in a weak soap-andwater solution and wrung out thoroughly, and then wipe again with a dry cloth.

GENERAL INFORMATION

Unpacking(opional)

Remote Control

General Operation

Throughout this manual you will notice that the everyday operation of the receiver is based on a series of user friendly on screen display and menus. These menus will help you get the most from your receiver, guiding you through installation, channel organizing, viewing and many other functions.

All functions can be carried out using the buttons on the RCU, and some of the functions can also be carried out using the buttons on the front panel.

The receiver is easy to use, always at your command and adaptable for future advances.

Please be aware that new software may change the functionality of the receiver.

Should you experience any difficulties with the operation of your receiver, please consult the relevant section of this manual, including the Problem Shooting, or alternatively call your dealer or a customer service adviser.

Batteries

Use’s Guide

GENERAL INFORMATION

RCU

Key

0~9

TV/RADIO

FAV

INFO

AUDIO

PR+, PR-

OK, LIST

EXIT

L R

EPG

PAUSE

TV/AV

UHF

TXT

PAL/NTSC

RECORD

Function

Turns power ON/OFF of the DTR

When watching a program, mute the sound

Enter number of the required menu item or select a program number to watch

Switches between TV and Radio mode

Switches back to previous program

Display the favorite program list

Shows information of the current program

Choose audio mode

Moves up / down a page in the listprogram

Press this key one time to run menu onscreen, and call command box

When watching a , change s or move to the next higher or lower item in the menu

Executes the selected item in the menu screen or enters the desired value in any input mode

Returns to the previous menu on the menu screen or escape from the menu

When watching a , adjust the volume or move to the left or right item in the menu

Selects the different audio modes

Calls up the EPG (Electronic Program Guide)

Press once to pause the screen picture, press once again to go to the normal mode

Switches between AV and TV mode

Switches to subtitle mode

No function

Switch to teletext mode

Switches between PAL and NTSC modes

Note: The operation may result in the slack of display on the screen.

Enter into the nine-pictures mode displayed on the screen.

Record the program

Play and stop the program

program program

program

Press to fast Forward or fast backward

Seek forward or backward

The picture is only for reference,please make the object as the standard.

GENERAL INFORMATION

Front Panel

Rear Panel

POWER CABLE

ANT IN: CONNECT TO ANTENNA LOOP: CONNECT TO ANOTHER RECEIVER

The picture is only for reference,please make the object as the standard.

CONNECT TO TV AND VCR

USING A SCART CABLE

+ 15 hidden pages