Drake ALT1000 Instruction Manual

AudioAccent

Contains an ALT 1000 Assistive Listening Transmitter

TM

Assistive Listening System

(with Limiter and Compression)

and 4 Model MR306 FM Receivers

Instruction Manual

Creating Sound Solutions for Easy Listening

TM

Important Safeguards i

WARNING: TO PREVENT FIRE OR

ELECTRICAL SHOCK DO NOT EXPOSE

THIS PRODUCT'S AC ADAPTER TO RAIN OR MOISTURE

¡WARNING!

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC

DO NOT REMOVE COVER OF AC ADAPTER

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED PERSONNEL

An appliance and cart combination should be moved with care. Quick stops,
excessive force and uneven surfaces may cause the appliance and cart
combination to overturn.

The lightning flash with arrow head symbol, within an equilateral triangle,
is intended to alert the user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS PRODUCT'S AC ADAPTER TO RAIN OR MOIS­TURE. DO NOT OPEN THE CABINET, REFER SERVICING TO
QUALIFIED PERSONNEL ONLY.

CAUTION:

TO PREVENT ELECTRIC SHOCK, DO NOT USE THE AC
ADAPTER WITH AN EXTENSION CORD RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADES OF THE AC ADAPTER CAN BE
FULLY INSERTED TO PREVENT BLADE EXPOSURE.

ATTENTION:

POUR PREVENIR LES CHOCS ELECTRIQUES, NE PAS
UTILISER CETTE FICHE POLARISEE AVEC UN
PROLONGATEUR, UNE PRISE DE COURANT OU UNE AU­TRE SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT
ETRE INSEREES A FOND SANS EN LAISSER AUCUNE
PARTIE A DECOUVERT.

1. Read Instructions—All the safety and operating instructions should be read before
the appliance is operated.

2. Retain Instructions—The safety and operating instructions should be retained for
future reference.

3. Heed Warnings—All warnings on the appliance should be adhered to.

4. Follow Instructions—All operating and use instructions should be followed.

5. Cleaning—Unplug this appliance from the wall outlet before cleaning. Do not use

liquid cleaners or aerosol cleansers. Use a damp cloth for cleaning.

6. Attachments—Do not use attachments that are not recommended by the
manufacturer or they may cause hazards.

7. Water and Moisture—Do not use this product near water—for example, near a
bathtub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming
pool—and the like.

8. Accessories—Do not place this product on an unstable cart, stand, tripod, bracket,
or table. The product may fall, causing serious injury to a child or adult, and serious
damage to the appliance.

9. Ventilation—This product should never be placed near or over a radiator or heat
register. This product should not be placed in a built-in installation such as a bookcase
or rack unless proper ventilation is provided or the manufacturer’s instructions have
been adhered to. Any slots or openings in the cabinet are provided for ventilation. To
ensure reliable operation of the product and to protect it from overheating, these
openings must not be blocked or covered. The openings should never be blocked by
placing the product on a bed, sofa, rug, or other similar surface. KEEP CURTAINS

AND OTHER FLAMMABLE MATERIALS OUT OF DIRECT CONTACT WITH THE AC
ADAPTER.

10. Power Sources—This product should be operated only from the type of power

source indicated on the marking label of the supplied AC Adapter. If you are not sure
of the type of power supplied to your home, consult your appliance dealer or local
power company.

11. Lightning—For added protection for this product during a lightning storm, or when
it is left unattended and unused for long periods of time, unplug the AC adapter from
the wall outlet.

WARNING:

SHOCK,

12. Power Lines—An outside antenna system should not be located in the vicinity of
overhead power lines, other electric light or power circuits, where it can fall into such
power lines or circuits. When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or circuits as contact with them
may be fatal.

13. Overloading—Do not overload wall outlets and extension cords as this can result
in a risk of fire or electric shock.

14. Servicing—Do not attempt to service this product yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.

15. Damage Requiring Service—Unplug this product from the wall outlet and refer
servicing to qualified service personnel under the following conditions:

a. When the AC adapter cord or plug is damaged.
b. If the AC adapter has been exposed to rain or water.
c. If the product does not operate normally by following the operating instructions. Adjust

only those controls that are covered by the operating instructions. An improper
adjustment may result in damage and will often require extensive work by a qualified
technician to restore the product to its normal operation.

d. If the product has been dropped or the cabinet has been damaged.
e. When the product exhibits a distinct change in performance—this indicates a need for

service.

16. Replacement Parts—When replacement parts are required, be sure the service
technician has used replacement parts specified by the manufacturer or have the same
characteristics as the original parts. Unauthorized substitutes may result in fire, electric
shock or other hazards.

17. Safety Check—Upon completion of any service or repairs to this product, ask the
service technician to perform safety checks to determine that the product is in proper
operating condition.

18. Outdoor Antenna Grounding—Before attempting to install this product, be sure the
antenna or cable system is grounded so as to provide some protection against voltage
surges and built-up static charges.
a. Use No.10 AWG (5.3mm2) copper, No.8 AWG (8.4mm2) aluminum, No.17 AWG
(1.0mm2) copper-clad steel or bronze wire or larger, as ground wire.
b. Secure antenna lead-in and ground wires to house with standoff insulators spaced
from 4 feet (1.22m) to 6 feet (1.83m) apart.

c. Mount antenna discharge unit as close as possible to where lead-in enters house.
d. A driven rod may be used as the grounding electrode where other types of electrode

systems do not exist. Refer to the National Electrical Code, ANSI/NFPA 70-1990 for
information.
e. Use jumper wire not smaller than No.6 AWG 13.3mm2) copper or equivalent, when a
separate antenna grounding electrode is used.

EXAMPLE OF ANTENNA GROUNDING

ANTENNA

LEAD IN

WIRE

GROUND CLAMP

ELECTRIC
SERVICE
EQUIPMENT

POWER SERVICE GROUNDING

(NEC ART 250, PART H)

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING

CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

ELECTRODE SYSTEM

ii

This page left intentionally blank

Table of Contents iii

Thank you for purchasing an AudioAccentTM Assistive
Listening System. This product has been designed and
manufactured to high quality standards, and will provide
reliable operation for many years.
Please carefully read the Instruction Manual for proper
installation of the transmitter to ensure reliable listening
range.

Important Safeguards

Table of Contents

Specifications / Options and Accessories

Introduction - General Description

Front Panel Controls and Indicators

Rear Panel Controls and Connections

Installation

Setup and Operation

Operating the MR306 Receiver

Also included with the system are (3) three
AudioAccent
These decals can be posted to inform people that a
facility is equipped with the AudioAccentTM Assistive
Listening System.

i

iii

iv

1

2

3

4
4

6

TM

Assistive Listening System decals.

Service Information / If You Need To Call For
Help

Warranty

8

9