Dräger EM200-E User Manual

Dräger EM200-E

Diesel Exhaust Measurement

The Dräger EM200-E is an electronic multigas instrument with internal sampling pump. It precisely determines CO and NOx content in undiluted exhaust gases of Diesel engines. The internal ambient pressure sensor allows the immediate use without preceding calibration in underground mines.

Gas inlet

Gaspreconditioner

LED and Infrared transmitter

USB interface

Shock and impact		Graphic display, illuminated
resistant housing
		Control keys „F, ▲, ▼, H“
	<![if ! IE]> <![endif]>D-50227-2015

02 | Dräger EM200-E

Benefits

Shock and impact proof housing

The Dräger EM200-E has an impact and shockproof body. Easy handling and an excellent technology allow precise and fast results of measurement. The high power battery a ords a high operating time of typically ten hours.

Precise measurement of CO and NOx content in exhaust gases from diesel engines

One multigas analysis instrument to be used for precise testing of diesel engines in underground mining applications: regulation compliance (in some countries maximum emissions from engines are regulated to be able to set ventilation rates), health risk (a build up of these gases can be dangerous to individuals; CO, NO and NO2 have regulated exposure concentrations), operating costs (increases in CO/NOx output can indicate a problem with the engine or the scrubbers resulting in reduced fuel e ciency), reduce downtime (using these values as pre-indicator for engine breakdowns can enable preventive maintenance instead of reactive measures and loss of production).

Documentation

Saved data can be locally documented or transferred to the PC.

High precision measurement in all di erent depths

An internal pressure sensor automatically compensates ambient pressure influences in di erent depths. Therefore engines do not have to go to the workshop as a “fixed” testing area. The Dräger EM200-E comes to the engine. No matter where it is located: 4,000 m below or 4,000 m above sea level.