DQ Technology M605N User Manual
End User Manual
Model Number: M605N
Product Description: VDSL2 / ADSL2+ / Ethernet WAN Residential Gateway featuring:
Qty 4 10/100 Ethernet Ports
Qty 1 Gigabit Ethernet Port
Qty 1 USB 2.0
802.11b/g/n 2T2R
VisionNet M605N Page 1 End User Manual Revision 3.1
TABLE OF CONTENTS
SECTION 1: GUI ACCESS
1.1
Accessing the GUI
3
SECTION 2: TROUBLESHOOTING
SECTION 2: TROUBLESHOOTING
2.1
View DHCP Statistics
5 2.2
View ARP Statistics
6
SECTION 3: DNS CONFIGURATION
SECTION 3: WAN CONFIGURATION
3.1
Universal Static WAN DNS Addresses
7
SECTION 4: LAN CONFIGURATION
SECTION 4: LAN CONFIGURATION
4.1
Configuring LAN Services
8 4.2
Reserving an IP Address within the DHCP Server
10 4.3
Configuring UPnP
12
SECTION 5: NAT CONFIGURATION
SECTION 5: NAT CONFIGURATION
5.1
Configuring Port Forwarding
13 5.2
Configuring Port Triggering
17 5.3
Configuring the DMZ Host
21
SECTION 6: WIRELESS CONFIGURATION
SECTION 6: MODEM CONFIGURATION SETTINGS
6.1
Wireless Channel
23 6.2
Wireless SSID
23 6.3
Wireless Security
24
VisionNet M605N Page 2 End User Manual Revision 3.1
SECTION 1: GUI ACCESS
Section 1.1
ACCESSING THE GUI
Step 1: Accessing the GUI via a web browser
1.A
Open your Web Browser
Use the modem’s LAN IP Address
to access the GUI locally
This is most likely
http://192.168.1.254
1.B
If you are not sure what the IP
Address is, you may view the
gateway address assigned, via
DHCP, to the NIC Card of your PC or
Device.
Place the IPv4 Gateway address
into the address bar of your
browser.
VisionNet M605N Page 3 End User Manual Revision 3.1
1.C
Once the modem responds, you will be challenged for a User Name and Password
Local Access
Username: enduser
Password: password
1. D
You will be directed to the Main GUI Page
VisionNet M605N Page 4 End User Manual Revision 3.1
SECTION 2: DIAGNOSTICS
Section 2.1
VIEW DHCP STATISTICS
Step 1: Access the GUI to find DHCP Statistics
1.A
Select the “Gateway Statistics” tab located within the left-hand frameset.
Then, In the left-hand frameset,
select “DHCP”
WHAT THESE STATISTICS MEAN:
This page will provide the IP Addresses assigned by the modem’s DHCP server, the MAC addresses of dynamically assigned devices,
and the amount of time that the device has spent on the network.
VisionNet M605N Page 5 End User Manual Revision 3.1
Section 2.2
VIEW ARP STATISTICS
Step 1: Access the GUI to find ARP Statistics
This step may be used to view all connected LAN devices, and is especially useful when using the “Reserve an IP Address” feature.
1.A
Select the “Gateway Statistics” tab located within the left-hand frameset.
Then, In the left-hand frameset,
select “Hosts”
WHAT THESE STATISTICS MEAN:
This page will provide the MAC Addresses of all recognized devices connected to the modem. A device will only be recognized once
it has requested data from the modem.
VisionNet M605N Page 6 End User Manual Revision 3.1
SECTION 3: DNS CONFIGURATION
Section 3.1
UNIVERSAL STATIC WAN DNS ADDRESSES
The VisionNet Modem may be assigned different DNS addresses for each WAN Service. In the event that Static IPs are to be used,
you may update and change the settings with the following procedure.
Step 1: Access the GUI to find the DNS Server Page
1.A
Select the “DNS” tab located within the left-hand frameset.
Then, In the left-hand frameset,
select “DNS Server”
1.B
Select “Use the following Static DNS IP Address”
VisionNet M605N Page 7 End User Manual Revision 3.1
SECTION 4: LAN CONFIGURATION
Section 4.1
CONFIGURING LAN SERVICES
Step 1: Direct Your Browser to the LAN Configuration Page
1.A
Select the “LAN” tab located within the left-hand frameset.
Then, In the left-hand frameset,
select “LAN IP CONFIGURATION”
VisionNet M605N Page 8 End User Manual Revision 3.1
Step 2: Configure LAN Settings
2.A
Configure the LAN IP Characteristics
IP Address:
192.168.1.254
(Unless your
ISP has
specified
another
address)
Subnet Mask:
255.255.255.0
Enable IGMP Snooping:
DO NOT
CHANGE
DHCP Server:
Enabled
Start IP Address:
192.168.1.64
End IP Address:
192.168.1.100
Primary DNS Server:
192.168.1.254
Secondary DNS Server:
192.168.1.254
or another
DNS Server
Leased Time (hour):
24
All other settings
DO NOT
CHANGE
Configure Second IP
Address:
DO NOT
CHANGE
2.B
Select “Apply / Save”
VisionNet M605N Page 9 End User Manual Revision 3.1
Loading...