DP Audio Video DZP905 User Manual

User Manual

DZP905

7 FullyMotorized Wide Touch screen DVDReceiver

DZP905

DP VideoDP Video

SRC

L

O

V

PWR

IR

BAND

MUTE

RESET

EJECT

AUX IN

DVD

TOUCH SCREEN 7 TFT LCD USB/SD DVD PLAYER

In-Dash Mobile Video System

SRC

L

O

V

PWR

DZP905

CLOCK ST

STOP

DP VideoDP Video

RPT

IR

MUTE

ADJ

Adjust angle

RESET

EJECT

AUX IN

DVD

BAND

MADE IN CHINA

Designed in the USA

Contents

Warning and Precautions.........................................2

Electric Connection.................................................4

Receiption collection
Speaker collection

Installation..............................................................5

Install the unit
Remove the unit

General Features.....................................................6

Remote Control.......................................................7

Loading and Replacing the battery
Basic operation

Play Operation........................................................9

Open/Close
Source/Power
Mute
play/pause
Eject
RPT
TIT
TFT-LCD adjustment
Display position adjustment

Setup Operation.....................................................11

General operation
Video operation
Audio operation

Radio Operation...................................................12

Band
Band tuner
AS/PS

Sound Operation..................................................14

SD/USB...............................................................15

TV ........................................................16Operation

Accessories.........................................................17

Troubleshooting...................................................18

Familiar characters and their meanings
General problems
TFT Monitor
Radio Tuner
Mp3 playback
DVD player

Specifications......................................................23

1

Warnings and Precautions

Warnings

1 Only connect the unit to a 12V power supply with negative grounding.

Never install the unit where the operation for safety driving is restrained.

2

Never use the video display function in the front when driving to prevent the violation of laws

3

regulations and also to reduce the risk of traffic accident except using for rear view video camera.

Never expose the unit, amplifier, speakers to moisture or water to prevent electronic sparks or fires.

4

Please don't change the fuse in the power cord without professional guidance, improper fuse may

5

cause damage to this using unit or even cause fire.

Please power off the unit at once and send it back to the after-sales service center or the dealer/

6

distributor yo purchased from if one of the following symptoms is found:
(a)NO audio output; (b)NO image output;(c)Water or other obstacle enters the unit; (d)Smoking;
(e)Peculiar smell.

To ensure safe driving, please adjust the volume to a safe and comfort level in case of emergency

7

situations.

8 Warning: It is illegal to Watch TV and Drive at the same time.

2

Warnings and Precautions

Precautions

1

Never disassemble or adjust the unit without any professional guide. For details, please consult any professional car shop/
dealer for inquiry.

2

If the front panel or the TFT monitor is squalid, please use a clean silicone cloth and neutral detergent to wipe off the spot.
Using a rough cloth and non-neutral detergent such as alcohol for cleaning may result in scratching or decoloration to the
applicant.

3

If any abnormal behavior of the unit is found, please refer to trouble shooting guide of this manual. If no relevant information is
found , please press the [RESET] key on the front panel to resume factory default.

4

If you have parked the car in hot or cold weather for a long time, please wait until the temperature in the car becomes normal
before operating the unit.

5

Using in-car heater in low temperature environment may result in beads coagulate inside the unit, DO NOT use the unit in this
situation, eject the disc and wipe off the bead on the disc. If the unit still doesn
after-sales service center.

6

No fierce impact to the LCD monitor when it is in open position for preventing the damage to any mechanisms inside.

7

To prevent the damage to the screen, avoid touching it with sharp objects.

't work after a few hours, please contact with

8

The monitor employs auto motorizing mechanism, please do

to any mechanisms inside.

9

To provide a clear demonstration and an alternative for easy understanding to the operation of this unit, graphic illustrations
are used. However, these illustrations are some different from the actual images displayed in the unit.

10

During operation the unit," "is displayed if the particular operation is not available or illegal.

11

Operate the unit correctly according to this manual to prevent. Unnecessary problem. The guarantee won

problem is caused by inappropriate operation.

n't push, pull, or swivel the monitor manually to prevent damage

't be valid if the

3

Electric Connection

TV ANTENNAPLUG
(Without TV tuner,
without this wire.)

CAR ANTENNA

PARKING
Connect to Switched Side of Parking Brake Circuit (-)

REVERSE

Connect control for antenna or remote control for amplifier

Ignition key
sw tchi

ACC wire

Battery wire

Car fuse box
(main fuse)

Battery

Ground wire(Black)

DIMMER

(To car chassis)

(Gray)

(Brown)

(Blue)

(Red)

(Yellow)

(Orange)

FRONT.L

FRONT.R

REAR.L

REAR.R

SUBWOOFER

FRONT RIGHT RCA OUT
FRONT LEFT RCAOUT
REAR RIGHT RCA OUT

REAR LEFT RCAOUT
VIDEO OUT
BACK CAR VIDEO IN
AUX LEFT IN
AUX RIGHT IN

VIDEO IN

White/Black

White

Gray/Black

Gray

Green lack/B

Green

Purple/Black

Purple

BROWN

RED
WHITE
BLUE

PURPLE
YELLOW
YELLOW
WHITE
RED
YELLOW

To front left
speaker

To front right
speaker

To r e ar l e ft
speaker

To rear right
speaker

4

Installation

Before installing the receiver permanently, fit it in the approximate place in your car ,and connect the
equipment according to the speakers and electrical connections. When
your system is operated properly,(preferably with the
car engine running), follow the instructions
for permanent installation
of your system.

INSTALL THE UNIT

1)Install half sleeve, can be with or
without adapter. It will fit better
with adapter.

2)Bend over some tabs to secure
the half sleeve inside of dash.

3) Support strap to be strutted
under dash, secure this strip to
avoid skipping of disc.

2)Bend over tabs
of half sleeve

(supplied)

1) Adapter
(not supplied)

REMOVE THE UNIT

Insert removal wrench into the small
gap on the right side of the unit and pull
the unit slightly out on the same side,
then release the wrench. Repeat the
same action for the left side. By now,
you can remove the unit and unplug
the wires connector.

Half sleeve
(supplied)

3) Two wrenches for releasing
the unit (supplied)

5

General Features

18

SRC

L

O

V

PWR

Stop/Clock

AVH-7073

CLOCK ST

1

17

16

15

14

RPT/ST

STOP

RPT

IR

5

4

3

2

6

Adjust angle

Adjust angle

ADJ

RESET

EJECT

MUTE

BAND DVD

8

AUX IN

97

10

11

13
12

6

General Features

18

Stop/Clock

Remote Control

16

17

RPT/ST

Adjustangle

15

14

Loading and replacing the battery

AVH-7073

CLOCK ST

STOP

RPT

SRC

L

O

V

IR

PWR

4

3

2

1

1

VOL/SRC/PWR Button: Rotate the VOL button to adjust the

Adjustangle

ADJ

RESET

EJECT

AUXIN

MUTE

BAND DVD

5

97

6

10

8

13
12

11

volume; press it to make confirmation./Play source switch.

3

2

[ ]/[ ]Button: Rewind, Last chapter/Forward,Next chapter.

/

4

Signal received window.

5

SD Slot.

6

To eject the DISC.

7

MUTE Button: Mute.

8

BAND Button: Band switch/Radio mode is random play.

9

DVD Button: switch to DVD play source directly.

10

10

EJECT Button: To eject the DISC.

11

AUX IN

12

USB Port.

13

Reset Button.

14

[ ]Button: Display Open/Close.

15

Adjust angle Button: Display position Adjustment.

16

TFT-LCD screen.

17

ST/RPT Button: Sound track switch/Repeat.

18

CLOCK/STOP Button: Clock/Stop.

Pull out

Notes of remote control using:

Aim the remote controller at the remote sensor on the unit.

1)

Remove the battery from the remote control or insert a

2)

battery insulator if the battery has not been used for a
month or longer.

DO NOT store the remote control under direct sunlight

3)

or in high temperature environment, or it may not function

properly.

The battery can work for 6 months under normal condition.

4)

If the remote control can't work, please change the battery.

Use(button shaped) lithium battery(CR-2025)only.

5)

DO NOT recharge, disassemble, heat or expose the battery

6)

in fire.
Insert the battery in proper direction according to the

7) (+)
and(-)poles.
Store the battery in a place where children cannot reach to

8)

avoid risk of accident.

7